LST Network Card BC216 2 User Manual

Control Panel Extension  
Bcnet216: BCE216-3LG  
• BCnet sectional control panel with  
two integrated loop interfaces  
• Extends a BCnet sectional control  
panel BC216-2 or BC216-3 by two  
loops  
• Analogue ringbus technology with  
unshielded detector cabling  
• Easy installation, also possible later  
on  
Fire is a permanent threat to life and property. There- ted within LST premises, thus guaranteeing flexible and  
fore, immediate response to a fire is imperative. The reliable individual solutions.  
main objective of the fire detection control panel Series  
BC216 is to alarm and to react in time and, conse- Using a 32-bit multiprocessor system, the fire detection  
quently, save lives and protect property. For decades control panel Series BC216 ensures topmost efficiency  
LST have focused their aims to undertaking unrivaled and speed – prerequisites for saving lives and minimi-  
efforts in order to realize new innovations in the security zing damage to property.  
area. Research, development and production are loca-  
Description  
The BCnet Sectional Control Panel/Extension BCE216- The loop processing functions of the BCE216-3LG fully  
3LG allows for the extension of a fire detection control correspond to the functions of a BCnet Sectional Con-  
panel BCnet216 by two ADM loops. The extension is in- trol Panel BC216-2 equipped with two Loop Interfaces  
tegrated into the fire detection control panel BCnet216 LIF64-1.  
by installing it in a BCnet sectional control panel BC216-  
2 or BC216-3 and connecting it to the GSSnet cabling The ADM loop principle offers intelligent analogue ring-  
via the GSSnet interface on the extension.  
bus technology with bi-directional data transfer. Each  
loop provides for the software-aided administration of  
The 24V supply of the BCnet Sectional Control Panel/Ex- up to 198 physical address points in a maximum of 128  
tension BCE216-3LG is powered from the BCnet sectio- detector zones.  
nal control panel in whose cabinet it has been installed;  
it does not have a power supply or battery charger of Easy parameterisation by means of PC software en-  
its own. The extension is designed as compact unit and ables you to optimally adapt the control panel to your  
mounted on a pivoting sheet steel carrier.  
individual requirements.  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
BCE216-3LG_DBL_LST_EN_0804.PDF • PAGE 1  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
 
Permanent Connection  
By means of a BCnet Sectional Control Panel/Extension loops. In one case, you thus have up to four loops at  
BCE216-3LG, a Fire Detection Control Panel BC216-2 your disposal. In addition, a variety of peripheral de-  
or BC216-3, respectively, can be extended by two vices can be connected to this device:  
• Fire brigade key safe  
• Transmitting device for the actuation of pagers via  
ESPA protocol  
• Modules for remote parameterisation and remote  
maintenance via computer newtork, modem or GSM  
connection  
• Transmitter module for the transmission of messages  
via SMS or e-mail  
– and much more.  
• Fire brigade control unit  
• Acoustic and optical signaling devices  
• External protocol printer  
• Remote display and operating panels  
• Remote indication unit  
• Actuations  
• Electronic monitoring system  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
BCE216-3LG_DBL_LST_EN_0804.PDF • PAGE 3  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
 
Distributed Intelligence in the GSSnet  
The fire detection control panel BCnet216 opens up ma- Cabling of the detectors is required only between two  
nifold possibilities for the realization of specific requests neighboring sectional control panels. This clear and  
of fire detection, especially in spacious buildings, high- flexible arrangement of the sectional control panel cre-  
rise buildings or wide-stretched areas.  
ates a powerful network. In this way, most economical  
The decentralized security network that has been crea- cabling and thus efficient use of the installation expen-  
ted by BCnet216 offers increased security and reduces ses is guaranteed. Larger distances between individual  
the total expenses due to a much lower cabling volume. sectional control panels can be bridged through the use  
The consistent ring-shaped cabling guarantees commu- of optical fiber modems or long distance modems.  
nication between the sectional control panels even in  
the event of a line fault.  
The entire virtual control panel BCnet216 provides for  
the monitoring in mid-sized and large systems, applying  
A sectional control panel of the BCnet216 is parame- the same technology and the same software tools as  
terised as main operating unit for the administration of with the single control panel BC216-1. This guarantees  
the GSSnet, all other members can be equipped with or a minimum of training and expansion costs as well as  
without a display and operating unit.  
expenses of the user and thus guarantees the optimal  
The system is designed modularly and can be gradually use of resources during the usable life of the building.  
expanded according to future demands. The maximum  
size of a BCnet216 comprises 127 network members, BCnet sectional control panels are available in wall  
9700 detector zones, 9700 actuations, 999 alarming mount cabinets, as 19“ compact version and in 19“  
devices, 99 transmitting devices as well as 199 logic slide-in technology.  
sectors. Different interfaces are available for the con-  
nection of external information devices, e.g., a facility  
management system or a remote maintenance sys-  
tem.  
Extinguishing Control System  
If required, the BCnet216 can be easily expanded to The LCnet216 is certified to EN 54-2, EN 54-4,  
an extinguishing control panel LCnet216 according to EN 12094-1 and VdS as a pure extinguishing control  
EN 12094-1. The panel can control up to 127 flooding panel and as a combined fire detection and extinguis-  
zones in a maximum of 127 extinguishing systems.  
hing control panel.  
The function of the extinguishing control panel is fully in- Optionally, the LCnet216 can be implemented with full  
tegrated into the fire detection control panel BCnet216, hardware redundancy.  
a combined operation is therefore possible.  
Specifications  
Supply voltage  
21 – 30 VDC  
Current consumption at 24V  
Idle loop current  
140mA (without detectors)  
typ. 300µA per detector/module  
max. 300mA (at reduced line resistance)  
Total loop current  
Idle loop voltage  
typ. 26V (Apollo/Discovery) or  
typ. 29V (System Sensor/200), respectively  
Loop line resistance  
Number of ADM loops  
Number of detector zones  
Ambient temperature  
Dimensions W × H × D  
Weight  
max. 50Ω per core  
2
max. 128 per loop, max. 144 in total  
-5°C to +50°C  
248 × 222 × 28 (mm)  
approx. 675g  
Part No.  
214034  
Order name  
BCnet Sectional Control Panel/Extension BCE216-3LG  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
BCE216-3LG_DBL_LST_EN_0804.PDF • PAGE 4  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
 

Lexmark Printer Z13 Z23 Z33 User Manual
LG Electronics Cell Phone UX300 User Manual
Life Fitness Treadmill T9 0XXX 04 User Manual
Lindy Laptop 21510 User Manual
Makita Air Compressor MAC1200 User Manual
Mattel Baby Toy BCF51 User Manual
Melissa Toaster 643 202 User Manual
Metabo Grinder 600160420 User Manual
Metra Electronics Car Stereo System 99 1005 User Manual
Metra Electronics Speaker 99 7508 User Manual