iHome Headphones iB75 User Manual

Model: iB75  
Bluetooth wireless earbuds  
with mic + remote and pouch  
Introduction  
Your new iHome Bluetooth stereo headphones are designed to link with your Bluetooth  
enabled smartphone or music player to allow you to wirelessly listen to music and answer  
phone calls within the normal 10 meter (30 feet) Bluetooth operating range.  
What’s Included  
USB Cable  
x 2  
x 2  
L
Mx 2  
S
SIZE  
SIZE  
SIZE  
Silicon Tips  
x 1set  
x 1set  
L
Mx 1set  
S
SIZE  
SIZE  
SIZE  
iB75 Bluetooth  
Wireless Headphones  
Stabilizer Fins  
Specications  
Bluetooth specication: Supports V2.1 + EDR with Handsfree Prole 1.5,  
Headset Prole 1.1 and A2DP prole 1.2 (Class ll)  
Standby time:  
Talk time:  
100 hours (with fully charged battery)  
8 hours (with fully charged battery)  
7 hours (with fully charged battery)  
up to 10 meters / 30 feet  
16 grams  
Music Playing Time:  
Operating Distance:  
Weight:  
Certications:  
CE, FCC, RoHS, BQB  
 
Controls and Indicators  
1
2
3
4
2
+
-
7
8
5
6
9
1. Multi-function button: Power On/Off, 5. Mini 8-pin USB Charging Port  
Answer/End, Pair, Play, and Pause  
(located under water resistant cover)  
2. Speakers  
6. Microphone  
3. Back button  
7. Volume + button  
4. Forward button  
8. Volume  
-
button  
9. Power On, Charging, Pairing LED Indicator  
Charging Your Headphones  
IMPORTANT: Your headphones operates on a built-in rechargeable lithium-ion battery.  
You should charge the battery for a full 4 hours before rst time use.  
1. Lift up the water resistant cover to expose the Mini 8-pin USB charging port.  
2. Connect the Mini 8-pin USB plug on the charging cable to the Mini 8-pin USB port on  
the headphones.  
3. Connect the standard USB plug on the charging cable to any standard USB power  
port such as found on a notebook computer, or the charging adapter for an iPod,  
iPhone, etc.  
4. The Power/Charging/Pairing indicator will glow RED while the headphones is charging.  
The indicator will turn Off when the battery is fully charged.  
Reminder: Allow the battery to charge for 4 hours before rst time use. Normal recharge  
time after rst use should take about 2 hours. When full charged the battery will provide  
up to 8 hours of talk time, 7 hours of music playing time, or 100 hours of standby time.  
 
Switching the Power On and Off  
1. Press and hold the Multi-function button for approximately 3 seconds until a ‘beep’ is  
heard. The LED indicator turns blue and begins ashing slowly. This indicates that the  
power is ‘On’.  
2. When the power is ‘On’ press and hold the Multi-function button for approximately 3  
seconds until a ‘beep’ is heard. The LED indicator turns red, ashes for a few seconds  
and then shuts off. This indicates that the power is ‘Off’.  
Pairing With a Bluetooth Enabled Smartphone or Music Player  
If your smartphone or music player, such as the iPod touch, is Bluetooth enabled  
(supports the A2DP Bluetooth Prole) you may pair these iHome headphones with your  
phone or music player to listen to music and make or receive calls as long as the two  
devices are within the Bluetooth operating range of approximately 30 feet of each other.  
1. Make sure that your iHome iB75 headphones are in the Power Off mode. Make sure  
that your smartphone or music player is ‘On’.  
2. Press and hold the Multi-function button on your iB75 headphones for about 5  
seconds until the LED indicator alternately ashes red and blue to indicate it is trying to  
pair with a compatible device.  
3. If necessary, turn on the Bluetooth function of your phone or music player so that it  
begins searching for a compatible device.  
4. “iHome iB75” should appear on your phone or music players compatible devices list.  
You may also see a message such as “Not Paired”. Tap on that message to complete  
the pairing process. If your phone or music player asks for a ‘password’ to complete  
the pairing process, enter ‘0000’ on the keypad of your phone or music player.  
5. When pairing is successful the screen on your phone should show “iHome iB75  
Connected” or similar message and the blue LED indicator on the iB75 headphones  
should ash repeatedly. Your headphones are now ready for use.  
Wearing Your Headphones  
Your iHome Bluetooth headphones are supplied with 3 different  
sizes of silicon ear cushions (tips) and three different sizes of soft  
rubber stabilizer ‘ns’ designed to prevent the headphones from  
falling out of your ears during periods of strenuous physical  
activity. Refer to the following illustration showing the proper way  
to t the headphones in your ears with the stabilizer ns installed.  
Although you must use the headphones with the silicon cushions to  
form a proper seal in your ear canals, using the stabilizer ns is optional.  
The medium (M) size cushions and ‘ns’ were installed at our factory. If you nd that the  
M size cushions and ns are either too big or too small for you, you may change to the S  
or L size cushions and ns. Start by removing the cushions simply by pulling them off the  
plastic tubes. Then remove the rubber ‘ns’ from the speaker housing. Install either the S  
of L ns on the speaker housings rst, then install either the S or L cushions by pushing  
them onto the plastic posts as far as they will go. Make sure that the cushions are  
securely xed on the posts so that a cushion does not remain in your ear when you  
remove the headphones.  
 
The two earpieces are marked ‘Land ‘R’. All of the controls and the Mini 8-pin USB  
charging port are located on the ‘R’ earpiece. Place the ‘R’ earpiece in your right ear and  
the ‘Learpiece in your left ear. The cable connecting the two earpieces should be behind  
your neck.  
Using Your Headphones  
Note: Some of the functions described below may not be supported on your specic  
smartphone. Check with your smartphone owners manual to conrm the features  
supported by your phone.  
Your headphones must be paired with your phone and turned on to perform any of the  
following operations.  
Receiving/Ending A Call  
When you receive an incoming call, press the Multi-function button once to answer the  
call through the headphones. When you are nished speaking press the Multi-function  
button once more to end the call.  
Making A Call  
When you make a call on your smartphone the call may be automatically transferred to  
the headphones if your smartphone supports this automatic transfer function. If not,  
press the Multi-function button once to transfer the call to the headphones.  
Voice Activated Calling  
If your smartphone supports this feature with the headphones, press and hold the  
Multi-function button for about 2 seconds to initiate the voice activated calling function,  
then follow the instructions supplied with your phone.  
Last Number Redial  
If your phone supports this feature, press the Multi-function twice to redial the last  
number you called.  
Declining A Call  
If you receive a call that you would rather not accept (indicated by the caller ID on your  
phone) press the Multi-function button twice to decline the call.  
Volume Control  
Press the Volume + ” or “ ” to adjust the volume of the incoming calls or the music  
volume level.  
 
Listening to Music  
To listen to music your headphones must be paired and connected to a smartphone or  
music player that supports the A2DP Bluetooth prole (see “Pairing With a Bluetooth  
Enabled Smartphone or Music Player” above). To play music, use the playback controls  
on the connected device. If you answer or make a call while listening to music, the music  
will pause automatically until you end the call.  
You may also use the buttons on the ‘R’ earpiece to control the music as follows:  
Play or Pause – Press the Multi-function button once to start playback; press again to  
pause; press once more to resume playback.  
Track Controls – Press the  
button during playback to skip the beginning of the next  
track. Press the button once during playback to skip back to the beginning of the  
current track. Press twice to skip back to the beginning of the previous track.  
Volume Controls – Press the “ +” or “ ” buttons to control the music playback volume.  
Troubleshooting  
Reception is noisy or intermittent.  
Make sure that the headphones and the paired device are within the Bluetooth operating  
range of approximately 30 feet.  
Make sure that your headphones are properly paired and  
connected with your Bluetooth enabled smartphone or  
music player. Refer to the “Pairing” instructions on this  
manual and in the manual supplied with your phone or  
music player if necessary.  
No Sound  
The rechargeable battery in your headphones may be  
exhausted and need to be recharged. Refer to the  
“Charging Your Headphones” instructions in this manual.  
The pairing settings between the headphones and your  
smartphone or music player may have been erased or  
deleted. Follow the “Pairing” instructions in this manual to  
repair and reconnect the devices.  
Unable to Pair/Connect  
Your specic model of smartphone may not support some  
of the functions described in this manual. Refer to the  
manual supplied with your phone for further information.  
Some Functions  
Do Not Work  
 
Care and Maintenance  
Always remember to turn your headphones off if they will not be used for a long period of  
time. Do not expose your headphones to extremely hot or cold temperatures for  
extended periods. Do not expose them to direct sunlight or leave them in places such as  
the dashboard of your car on a hot day. Prevent water or any other liquids from entering  
the cabinets of your headphones.  
USB Cable  
This iHome Bluetooth headphone uses a "Mini 8-pin USB" cable for charging. You cannot  
charge this model with a standard mini or micro USB cable. If you misplace or lose the  
original Mini 8-pin USB charging cable supplied with this headphone, contact iHome  
Customer Service to order a replacement Mini 8-pin USB cable.  
Protect Your Hearing  
Using these, or any headphones at high volume levels for long periods can result in  
permanent hearing damage. Always start listening with volume controls on your  
headphones and your paired smartphone or music player at a low level and then  
gradually increase the volume controls to a comfortable listening level.  
Important Notes  
It is dangerous and illegal (in some jurisdictions) to use headphones when you are driving  
a car, riding a bike or motorcycle, or operating a watercraft. Be aware of local laws and  
regulations.  
Do not use these headphones in situations where they might cause distractions or  
prevent you from hearing warning sounds.  
These headphones contain small parts and should be kept out of reach of small children.  
There are no user serviceable parts in these headphones. Do not attempt any service or  
repairs on your own. Refer to the warranty for service, repair or replacement information.  
 
FCC ID: EMOIB75  
IC: 986B-IB75  
FCC Information  
FCC Radiation Exposure Statement  
This equipment complies with FCC RF radiation exposure limits set forth for an  
uncontrolled environment.  
This Device complies with RSS-210 of the IC Rules; Operation is subject to the following  
two conditions:  
(1)This device may not cause interference and  
(2)This device must accept any interference received, including interference that may  
cause undesired operation  
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS  
102 and compliance with RSS-102 RF exposure, users can obtain Canadian information  
on RF exposure and compliance.  
This device complies with Part 15 of the FCC Rules, operation is subject to  
the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Warning: Changes or modications to this unit not expressly approved by the party  
responsible for compliance could void the users authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du  
Canada.  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils  
radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil  
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout  
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre  
le fonctionnement.  
 
Limited One-Year Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this  
product to be free from defects in workmanship and materials, under normal use and conditions,  
for one year of the product from the date of original purchase.  
Should this product fail to function in a satisfactory manner, it is best to rst return it to the store  
where it was originally purchased. Should this fail to resolve the matter and service still be required  
by reason of any defect or malfunction during the warranty period, SDI will repair or, at its  
discretion, replace this product without charge. This decision is subject to verication of the  
defect or malfunction upon delivery of this product to the Factory Service Center authorized by  
SDI Customer Service. The product must include proof of purchase, including date of purchase.  
An out-of-warranty fee for service will be charged for units that are received without proof of  
purchase.  
Before returning this product for service, please rst replace the batteries (if applicable) with fresh  
ones, as exhausted or defective batteries are the most common cause of problems encountered.  
If service is still required:  
1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address of  
the Factory Service Center.  
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
SDI is not responsible for damage that occurs during shipping to the Factory Service Center.  
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of  
purchase, if within the warranty period. Also include your name and address information, a  
brief description for why the unit is being returned, and the return authorization number. No  
unit can be processed without a return authorization number.  
4. Write the return authorization number on the side of the shipping package and send the unit  
prepaid and insured to the Factory Service Center address authorized by SDI Customer  
Service.  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.  
It does not cover (i) products which have been damaged by negligence or willful actions, misuse  
or accident, or which have been modied or repaired by unauthorized persons; (ii) cracked or  
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CDs  
or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center  
and its return to the owner.  
This warranty is valid only in the United States of America and does not extend to owners of the  
product other than to the original purchaser. In no event will SDI or any of its afliates, contractors,  
resellers, their ofcers, directors, shareholders, members or agents be liable to you or any third  
party for any consequential or incidental damages, any lost prots, actual, exemplary or punitive  
damages. (Some states do not allow limitations on implied warranties or exclusion of  
consequential damages, so these restrictions may not apply to you.) This warranty gives you  
specic legal rights, and you may also have other rights which vary from state to state.  
Your acknowledgement and agreement to fully and completely abide by the above mentioned  
disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,  
cashier's check, or credit card) for purchase of your SDI product.  
© 2013 SDI Technologies, Inc. All rights reserved  
iB75-130809-B (ENG)  
Printed in China  
 

Hampton Bay Outdoor Ceiling Fan 122 135 User Manual
Harman Kardon Home Theater System 60BQ User Manual
Hearth and Home Technologies Gas Heater BV4236DBI User Manual
Heath Zenith Work Light UT 5403 BZ User Manual
Honeywell Door 6150RF User Manual
Honeywell Egg Cooker W7100J User Manual
Hotpoint Dishwasher SDW 60 User Manual
Hotpoint Washer HE7L 492 User Manual
HP Hewlett Packard Personal Computer Business e pc User Manual
HP Hewlett Packard Personal Computer C7J85US#ABA User Manual