LIMIT SWITCHES
Series 55 Rotary Limit Switches
Direct replacement for HWS Series 15 and G.E. Series CR115 switches
Limit the travel of electrically operated doors, conveyors, hoists, machine tool work tables
and similar devices. Equipment having rotating mechanisms, or linear motion which can be
translated into rotational motion, can be controlled by these versatile switches. Available
with up to four S.P.D.T. or D.P.D.T. switch blocks for control of multiple functions.
Switches Feature
• Six gear ratios
• Right hand, Left hand or Dual shaft
models (RH shown in photos)
• Two, Three or Four switches
• Mount in any position
• Easy to wire.
• Rugged die cast enclosures
• NEMA 4 construction
(Exceeds requirements of
NEMA 1 and NEMA 12)
• High strength steel multi-use input
shaft; #404 Woodruff key slot,
0.19 dia. hole and setscrew dimple
• Switch terminal screws for quick wiring
• Standard or Extended Dwell cams
• Easy, precision timing adjustment using
standard screwdriver and provided tool
• Industrial grade bearings
• Industrial duty S.P.D.T. or D.P.D.T. snap switches
are
and
listed
SWITCH
INSULATING
SHIELD
CAM
ADJUSTING
PINION
Geared Rotary Limit Switches for overtravel protection and
other uses on material handling equipment, hoists, cranes,
valves, compacting equipment, machine tool lead screws,
packaging machinery, powered doors, gates and windows, etc.
Mounting and shaft location allows direct replacement of
HWS Series 15 and G.E. Series CR115 switches.
Contact Block Specifications
15 Amp 120, 240, 480 or 600 VAC.
1/2 H.P. 120 VAC, 1.0 H.P. 240 VAC
0.8 Amp 115 VDC, 0.4 Amp 230 VDC
Pilot Duty 600 VAC Max.
CONDUIT
CONNECTION
Tapped for
HIGH STRENGTH
STEEL SHAFT
Key way, Through Hole &
Setscrew Dimple Standard
1.00" NPT
Right Hand Shaft–Four Switch Model
26
Gleason Reel Corp. • 600 South Clark St. • P.O. Box 26 • Mayville, WI 53050 • Phone: 920-387-4120
|