Gefen TV Cables EXT HD CP FM10 User Manual

®
EXT-
HD-CP-FM10  
User Manual  
w
ww.gefen.com  
 
ASKING FOR ASSISTANCE  
Technical Support:  
Telephone  
(818) 772-9100  
(800) 545-6900  
Fax  
(818) 772-9120  
Technical Support Hours:  
8:00 AM to 5:00 PM Monday through Friday, Pacic Time  
Write To:  
Gefen LLC  
c/o Customer Service  
20600 Nordhoff St  
Chatsworth, CA 91311  
Notice  
Gefen LLC reserves the right to make changes in the hardware, packaging, and  
any accompanying documentation without prior written notice.  
HD Extender 1FO is a trademark of Gefen LLC  
HDMI, the HDMI logo, and High-Denition Multimedia Interface are  
trademarks or registered trademarks of HDMI Licensing in the United States and  
other countries.  
© 2012 Gefen, LLC. All rights reserved.  
All trademarks are the property of their respective owners.  
Rev A1  
 
CONTENTS  
1
2
3
4
5
6
6
7
8
9
Introduction  
Operation Notes  
Features  
Cable Layout  
Cable Descriptions  
Connecting the HD Extender 1FO  
Wiring Diagram  
Operating the HD Extender 1FO  
Specications  
Warranty  
 
INTRODUCTION  
Congratulations on your purchase of the Gefen HD Extender 1FO.  
Your complete satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to install and simple to operate.  
The Gefen HD Extender 1FO  
The HDMI ber optic pigtail module extender with HDCP support extends HDMI  
up to 1000 feet (300 meters) using a single-strand 50/125μm multimode (OM2)  
SC-terminated ber optic cable. It supports resolutions up to 1080p Full HD and  
HD lossless audio formats like LCPM 7.1 audio, Dolby® Digital Plus, Dolby®  
TrueHD, and DTS-HD® Master Audio™. Optical signal transmission provides  
galvanic isolation and immunity to electromagnetic interference compared to  
similar copper based extension modules. The pigtail design of the Sender and  
Receiver modules relieves stress and clutter on the source and display  
connector panels. Their compact design makes them ideal for tting neatly  
behind equipment for a clean installation, making it a great way to easily extend  
HDMI.  
How It Works  
The Sender pigtail end plugs into the HDMI source. The Receiver pigtail end  
plugs into the HDTV display. Connect a single-strand 50/125μm multimode  
(OM2) SC-terminated ber optic cable from the Sender to the Receiver module.  
Plug the power supply into the Receiver module and a vibrant Hi-Def picture will  
appear on your display.  
1
 
OPERATION NOTES  
PLEASE READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE HD EXTENDER 1FO  
In most situations, the Sender pigtail module does not need to be externally  
powered unless the source does not supply enough power through the  
HDMI connector. If the Sender requires a separate power supply only use  
Gefen part no. EXT-PS52AIP-1.3. Using a different power supply other  
than the recommended type may cause fatal damage to the Sender pigtail  
module.  
2
 
FEATURES  
Features  
Extends HDMI up to 1000 feet (300 meters) using a single-strand 50/125μm  
multimode (OM2) SC-terminated ber optic cable  
Supports resolutions up 1080p Full HD  
Supports HD lossless audio: LCPM 7.1 audio, Dolby® Digital Plus, Dolby®  
TrueHD, and DTS-HD® Master Audio™  
Fiber optic transmission eliminates electromagnetic interference (EMI)  
Pigtail design relieves stress and clutter on the source and display  
connector panels  
3DTV pass-through  
DDC bidirectional support  
HDCP pass-through  
Supports Deep Color  
Compact Sender and Receiver modules provide a clean, easy installation  
FCC and CE compliant for EMI/RFI emission  
Package Includes  
(1) HD Extender 1FO - Sender Pigtail module  
(1) HD Extender 1FO - Receiver Pigtail module  
(1) 5V DC power supply  
(1) Quick-Start Guide  
3
 
CABLE LAYOUT  
6
3
7
4
5
1
2
4
 
CABLE DESCRIPTIONS  
1
2
Power Indicator (Sender module)  
This LED will glow bright green when the Hi-Def source is supplying sufcient  
power to the Sender module. If the LED ashes green, then the source is  
unable to power the Sender module. See page 7 for more information.  
Fiber Optic Connector (Sender module)  
Connect an SC-terminated ber optic cable from the Sender pigtail module to  
the SC ber connector on the Receiver pigtail module.  
3
4
HDMI Connector, male (Sender module)  
Connect this end of the Sender pigtail module to the Hi-Def source.  
Power Indicator (Receiver module)  
This LED will glow bright green when one of the included 5V DC power supplies  
is connected to the power receptacle on the Receiver module.  
5
Fiber Optic Connector (Receiver module)  
Connect the SC-terminated ber optic cable from the Sender pigtail module to  
the SC ber connector on the Receiver pigtail module.  
6
7
HDMI Connector, male (Receiver module)  
Connect this end of the Receiver pigtail module to the HDTV display.  
Power Receptacle (Sender / Receiver module)  
Connect the included 5V DC power supply to this power receptacle. Both the  
Sender and Receiver module have power receptacles. However, the Sender  
module does not need to be externally powered unless the source does not  
supply enough power through the HDMI connector.  
5
 
CONNECTING THE HD EXTENDER 1FO  
How to Connect the HD Extender 1FO  
1. Connect the Sender pigtail module to the Hi-Def source.  
2. Connect the Receiver pigtail module to the HDTV display.  
3. Connect a single strand of SC-terminated ber optic cable between the ber  
optic connectors on the Sender and Receiver pigtail modules.  
4. Connect the included 5V DC power supply to power receptacle on the  
Receiver pigtail module.  
5. Power-on the display and Hi-Def source.  
NOTE: The Sender module does not need to be externally powered  
unless the Hi-Def source does not supply enough power through the  
HDMI connector. The Receiver module must always be powered  
using the included 5V DC power supply.  
Wiring Diagram for the HD Extender 1FO  
HDMI  
FIBER OPTIC CABLE  
Computer  
Sender  
Receiver  
HD  
Display  
EXT-HD-CP-FM10  
6
 
OPERATING THE HD EXTENDER 1FO  
Power Indicators  
The power indicators on both the Sender and Receiver modules of the HD  
Extender 1FO provide information about the current power state.  
Normal operation  
If the power indicator on both the Sender and Receiver module glows bright  
green, then both the Sender and Receiver module have sufcient power.  
Sender module  
Receiver module  
No power / insufcient power on the Sender module  
If the Hi-Def source is unable to supply the required 5V to the Sender module,  
then the power indicator on the Sender module will ash bright green. If this is  
the case, then connect a secondary 5V DC power supply to the power receptacle  
on the Sender module (use Gefen part no. EXT-PS52AIP-1.3).  
Sender module  
7
 
SPECIFICATIONS  
Maximum Pixel Clock............................................................................... 225 MHz  
Video Input Connector (Sender)............................. (1) HDMI Type-A, 19-pin, male  
Video Output Connector (Receiver)....................... (1) HDMI Type-A, 19-pin, male  
Link Connector (Sender/Receiver).......................... (1) Type SC ber (50 /125μm)  
Power Supply (Receiver)....................................................................... 5V / 2A DC  
Power Supply (Sender).................. 5V / 2A DC (not needed for most applications)  
Power Consumption (Receiver)........................................................... 1.5W (max.)  
Operating Temperature.................................................. 0 to +122 °F (0 to +50 °C)  
Storage Temperature................................................. -4 to +158 °F (-20 to +70 °C)  
Relative Humidity................................................................................. 10% to 80%  
Dimensions (W x H x D)........................................................ 1.18” x 0.47” x 10.71”  
(29.97mm x 11.93mm x 272.03mm)  
Shipping Weight.................................................................................. 1lb (0.45 kg)  
8
 
WARRANTY  
Gefen warrants the equipment it manufactures to be free from defects in material  
and workmanship.  
If equipment fails because of such defects and Gefen is notied within two (2)  
years from the date of shipment, Gefen will, at its option, repair or replace the  
equipment, provided that the equipment has not been subjected to mechanical,  
electrical, or other abuse or modications. Equipment that fails under conditions  
other than those covered will be repaired at the current price of parts and labor in  
effect at the time of repair. Such repairs are warranted for ninety (90) days from  
the day of reshipment to the Buyer.  
This warranty is in lieu of all other warranties expressed or implied, including  
without limitation, any implied warranty or merchantability or tness for any  
particular purpose, all of which are expressly disclaimed.  
1. Proof of sale may be required in order to claim warranty.  
2. Customers outside the US are responsible for shipping charges to and from  
Gefen.  
3. Copper cables are limited to a 30 day warranty and cables must be in their  
original condition.  
The information in this manual has been carefully checked and is believed to  
be accurate. However, Gefen assumes no responsibility for any inaccuracies  
that may be contained in this manual. In no event will Gefen be liable for  
direct, indirect, special, incidental, or consequential damages resulting from  
any defect or omission in this manual, even if advised of the possibility of such  
damages. The technical information contained herein regarding the features and  
specications is subject to change without notice.  
For the latest warranty coverage information, refer to the Warranty and Return  
PRODUCT REGISTRATION  
Please register your product online by visiting the Register Product page  
under the Support section of the Gefen Web site.  
9
 
 
 
Rev A1  
Pb  
This product uses UL or CE listed power supplies.  
 

Echo Edger PE 225 User Manual
Fisher Price Baby Toy H4651 User Manual
Fluke Universal Remote Fluke 16 User Manual
GarrettCom Switch 6K25e User Manual
GarrettCom Switch Quad User Manual
GE Clothes Dryer DBSR463 User Manual
GE Clothes Dryer GFDS355EL User Manual
GE Microwave Oven JES1231 User Manual
GE Oven JTP13 User Manual
GE Refrigerator 49 60562 2 User Manual