Fujitsu Laptop P1510D User Manual

Fujitsu LifeBook  
P Series  
BIOS Guide  
LifeBook P Series Model:  
P1510D  
Document Date: 11/18/2005  
Document Part Number: FPC58-1474-01  
F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N  
 
M a i n M e n u  
MAIN MENU - SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. Follow the instructions for  
Navigating through the Setup Utility to make any  
changes.  
the field’s function and any special information needed  
to help understand the field’s use.  
System Time and System Date can also be  
set from your operating system without  
using the setup utility. Use the Date and  
Time icon on your Windows Control Panel.  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[14:57:01]  
[11/08/2005]  
Adjust calendar clock.  
Primary Master  
Language:  
[TOSHIBA MK2003GAH-(PM)]  
[English (US)]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
Menu Field  
Options  
Default  
Description  
System Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour format of  
hours:minutes:seconds with 2 digits for each. (HH:MM:SS).  
Example: 16:45:57. You may change each segment of the time  
separately. Move between the segments with the [Tab] key and/or  
[Shift] + [Tab] keys.  
System Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/day/year  
numeric format with 2 digits each for month and day and 4 digits  
for year. (MM/DD/YYYY) for example: 03/20/1998. You may  
change each segment of the date separately. Move between the  
segments with the [Tab] key and/or [Shift] + [Tab] keys.  
3
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Menu Field  
Options  
Default  
Description  
Primary Master:  
Selects Primary  
Master submenu  
–—  
Displays the type of device on this Serial ATA/IDE interface, if there  
is one. Pressing the Enter key selects the Primary Master submenu  
allowing additional device configuration options for this interface.  
Language:  
English (US)  
Japanese (JP)  
[English  
(US)]  
The default setting differs between the US/European and the Japa-  
nese model. Selects the display language for the BIOS.  
4
 
M a i n M e n u  
Note: Actual hard drive label shown may vary. Depending  
on the drive type, information such as cylinders, heads and  
sectors may also be displayed.  
Primary Master Submenu of the Main Menu  
The Primary Master submenu identifies which ATA  
devices are installed.  
PhoenixBIOS Setup Utility  
Security Power Boot  
Main  
Advanced  
Info  
Exit  
Item Specific Help  
Primary Master [TOSHIBA MK2003GAH -(PM)]  
Select Serial ATA/IDE  
drive installed here.  
Type:  
[Auto]  
LBA Format  
Total Sectors:  
Maximum Capacity:  
39062520  
20000MB  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Multi-Sector Transfers:  
LBA Mode Control:  
Transfer Mode:  
[16 Sectors]  
[Enabled]  
[Multiword DMA 2]  
[Disabled]  
[None]  
The drive is disabled.  
Ultra DMA Mode:  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9  
Setup Defaults  
Enter  
Select  
Sub-Menu  
F10 Save and Exit  
Figure 2. Primary Master Submenu  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
n
Type:  
Auto  
None  
[Auto]  
Selects the Serial ATA/IDE device type. Select Auto to have the  
type automatically identified by the BIOS at POST. If None is  
selected, all of the following Set-up items do not appear.  
n
LBA Format  
Logical Block Addressing (LBA)  
Total  
Sectors:  
---  
---  
---  
---  
The total number of sectors on your hard disk  
Maximum  
Capacity:  
The maximum capacity of your hard disk  
5
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
n
Multi-Sector  
Transfers:  
Disabled  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
[16 Sectors]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Specifies the number of sec-  
tors per block for multiple sector transfer.  
n
n
n
n
n
n
LBA Mode  
Control:  
Disabled  
Enabled  
[Enabled]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Enables or disables Logical  
Block Addressing in place of Cylinder, Head, Sector addressing.  
n
n
n
n
n
n
n
Transfer Mode:  
Standard  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
Multiword DMA 1  
Multiword DMA 2  
[Multiword  
DMA 2]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Selects the method for mov-  
ing data to/from the drive. Autotype the drive to select the optimum trans-  
fer mode.  
n
n
n
n
n
n
n
Ultra DMA  
Mode:  
Disabled  
Mode 0  
Mode 1  
Mode 2  
Mode 3  
Mode 4  
Mode 5  
[Disabled]  
The best option is selected by the BIOS automatically when Auto is  
selected and cannot be selected by the user. Selects the method for mov-  
ing data to/from the drive. Autotype the drive to select the optimum trans-  
fer mode.  
Exiting from Main Menu  
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to  
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu.  
If you wish to move to another menu, use the cursor keys.  
6
 
A d v a n c e d M e n u  
ADVANCED MENU - SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:.  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Turn NumLock on or off.  
Select between the display panel and an external CRT  
display.  
Enable or disable compensation for your display.  
Configure internal controllers.  
Configure CPU and USB features.  
Configure Miscellaneous features  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the field’s function and any special information  
needed to help understand the field’s use.  
PhoenixBIOS Setup Utility  
Security Boot Info  
Main  
Advanced  
Exit  
Item Specific Help  
Keyboard/Mouse Features  
Video Features  
Configures keyboard  
/mouse features.  
Internal Device Configurations  
CPU Features  
USB Features  
Miscellaneous Configurations  
Event Logging  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 3. Advanced Menu  
Table 3: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
Keyboard/Mouse  
Features  
When selected, opens the Keyboard/Mouse Features submenu, which allows setting NumLock.  
Video Features  
When selected, opens the Video Features submenu, which allows setting of the display parame-  
ters, including routing of video signals to different displays.  
Internal Device  
Configurations  
When selected, opens the Internal Device Configurations submenu, which allows enabling or  
disabling the IDE, LAN, and modem controllers.  
CPU Features  
When selected, opens the CPU Features submenu, which allows configuration of CPU  
performance features.  
7
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Table 3: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Description  
USB Features  
When selected, opens the USB Features submenu, which allows enabling or disabling USB and  
SCSI Subclass support.  
Miscellaneous  
Configurations  
When selected, opens the Miscellaneous Configurations submenu, which allows you to change  
the power button, Wake Up On LAN, and Volume settings.  
Event Logging  
When selected, opens the Event Logging submenu which lets you view and enable the event log.  
8
 
A d v a n c e d M e n u  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for setting the condition of the NumLock button.  
.
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
[Off]  
Item Specific Help  
[On] or [Off]  
Numlock is On or Off.  
Numlock:  
[On/Padlock Off]  
Numlock is On, but use  
with [Fn] for 10-key  
input.  
* Windows XP preserves  
Numlock state when the  
user logs off.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 4. Keyboard/Mouse Features Submenu  
Table 4: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
On  
Off  
[Off]  
Sets the NumLock function state when the computer  
completes booting.  
On/Padlock Off  
9
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for setting the display parameters.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Video Features  
Item Specific Help  
Display  
Compensation:  
[Auto]]  
[Enabled]  
Select display terminal.  
*This setting is not  
effective after  
operating systems  
starts up.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 5. Video Features Submenu  
Table 5: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Display:  
Internal Flat Panel  
External  
Auto  
[Auto]  
Selects where the video signal will be routed. Note that  
once the system boots up, the settings for the Windows  
video driver take precedence over this setting.  
Compensation:  
Disabled  
Enabled  
[Enabled]  
Enables or disables compensation which controls spacing  
on the display. When enabled, displays with less than pixel  
resolution 800 x 600 will still cover the entire screen.  
10  
 
A d v a n c e d M e n u  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configurations submenu allows the user to configure other internal devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Item Specific Help  
Internal Device Configurations  
[Disabled]  
IDE port is disabled.  
IDE Controller:  
Modem Controller:  
LAN Controller:  
Wireless LAN:  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[Enabled]  
IDE port is enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 6. Internal Device Configurations Submenu  
Table 6: Fields, Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu  
Menu Field  
Options  
Default  
Description  
IDE Controller:  
Disabled  
Enabled  
[Enabled]  
Enables or disables selected IDE devices.  
Modem  
Controller:  
Disabled  
Enabled  
[Enabled]  
[Enabled]  
[Enabled]  
Enables or disables the modem device.  
Enables or disables LAN controller.  
LAN Controller:  
Wireless LAN:  
Disabled  
Enabled  
Disabled  
Enabled  
Enables or disables the wireless LAN device.  
11  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
CPU Features Submenu of the Advanced Menu  
The CPU Features submenu configures certain features of the CPU in the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
CPU Features  
Item Specific Help  
SpeedStep(R) Technology:  
On Battery:  
On AC:  
[Enabled]  
[Battery Optimized]  
[Maximum Performance]  
Select Enhanced  
Intel(R) SpeedStep(R)  
Technology enabled or  
disabled.  
XD Bit functionality:  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 7. CPU Features Submenu  
Table 7: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
n
SpeedStep(R)  
Technology:  
Disabled  
Enabled  
[Enabled]  
Enables or disables SpeedStep(R) Technology.  
n
n
On Battery:  
Maximum  
Performance  
Battery Optimized  
Automatic  
[Battery  
Optimized]  
Allows the user to select the power conditions when the  
system is running on battery power.  
n
n
n
On AC:  
Maximum  
[Maximum  
Performance]  
Allows the user to select the power conditions when the  
system is running on AC power.  
Performance  
n
n
Battery Optimized  
Automatic  
n
n
XD Bit  
functionality:  
Disabled  
Enabled  
[Enabled]  
Allows the user to enable and disable the Execute Disable Bit  
functionality. Execute Disable Bit allows the processor to  
classify areas in memory where application code can and  
cannot execute. In the event an internet worm attempts to  
insert code in the buffer, the processor disables code  
execution to prevent damage or worm propagation.  
12  
 
A d v a n c e d M e n u  
USB Features Submenu of the Advanced Menu  
The USB Features submenu configures the USB capabilities of the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
Legacy USB Support:  
SCSI SubClass Support:  
[Enabled]  
[Disabled]  
The feature is disabled.  
[Enabled]  
[Enabled]  
Legacy USB Emulation  
is enabled and USB  
devices are available  
without USB aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 8. USB Features Submenu  
Table 8: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
n
Legacy USB  
Support:  
Disabled  
Enabled  
[Enabled]  
When Disabled is selected, legacy USB emulation is dis-  
abled. When Enabled is selected, legacy USB emulation is  
enabled and USB devices are available without USB-aware  
OS.  
n
n
n
SCSI SubClass  
Support:  
Disabled  
Enabled  
[Enabled]  
When Enabled is selected, USB devices that belong to the  
SCSI subclass in the mass storage class (e.g., USB Memory  
Key) are enabled. Note that enabling this feature may  
cause the system to hang during POST, depending on the  
device that is connected.  
13  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Miscellaneous Configurations Submenu of the Advanced Menu  
The CPU Features submenu configures certain features of the CPU in the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Miscellaneous Configurations  
Item Specific Help  
Power Button:  
[Disabled]  
[Disabled]  
[Off]  
[Middle]  
[Enabled]  
[Normal]  
Configures the power  
button.  
Wake up on LAN:  
Auto Save To Disk:  
Volume Setting:  
PCI Clock Run:  
FAN Control:  
*ACPI OS ignores this  
setting.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 9. Miscellaneous Configurations Submenu  
Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu  
Menu Field  
Options  
Default  
Description  
Power Button:  
Disabled  
Power Off  
[Disabled]  
When Disabled is selected, pressing the power button does  
not affect power. When Enabled is selected, pressing the  
button powers off the system.  
Wake up  
on LAN:  
Disabled  
Enabled  
[Disabled]  
[Off]  
When Enabled is selected, the system will wake up when  
the internal LAN receives a Magic Packet while it is  
powered off.  
Auto Save  
To Disk:  
Off  
On  
When this is enabled, when the system reaches a low bat-  
tery state while it is in suspend mode, it will save to disk  
and then power off.  
Volume Setting:  
Off  
[Middle]  
Allows you to set or disable the system volume level.  
Minimum  
Middle  
Maximum  
14  
 
A d v a n c e d M e n u  
Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu  
Menu Field  
Options  
Default  
Description  
PCI Clock Run:  
Disabled  
Enabled  
[Enabled]  
This allows you to enable or disable the running of the  
Peripheral Component Interconnect (PCI) clock.  
FAN Control:  
Normal  
Silent  
[Normal]  
When set to [Silent], the fan comes on less frequently than  
when set to [Normal].  
15  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Event Logging Submenu of the Advanced Menu  
The Event Logging submenu is for setting up the logs for DMI event logging.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
System Boot Event:  
[Disabled]  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 10. Event Logging Submenu  
Table 10: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Event Log Capacity:  
Space  
Display only  
Available  
Event Log Validity:  
View Event Log:  
Event Logging:  
Valid  
Display only  
Enter  
[Enter]  
[Enabled]  
Allows you to view content of event log.  
Turns event logging on and off for all DMI events.  
Disabled  
Enabled  
System Boot Event:  
Clear All Event Logs:  
Mark Events as Read:  
Disabled  
Enabled  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot events.  
When set to [Yes] all event logs will be cleared at next boot.  
Allows you to mark events currently in the event log as read.  
No  
Yes  
Enter  
[Enter]  
16  
 
S e c u r i t y M e n u  
SECURITY MENU - SETTING THE SECURITY FEATURES  
The Security menu allows you to set up the data security  
features of your notebook to fit your operating needs and  
to view the current data security configuration. Follow  
the instructions for Navigating Through the Setup Utility  
to make any changes.  
If you make an error when re-entering  
the password a [Warning] will be  
displayed on the screen. To try again,  
press the Enter key and then retype the  
password. Press the Esc key to abort the  
password setting process.  
Entering a password incorrectly three  
times in a row will cause the keyboard  
and mouse to be locked out and the  
warning [System Disabled] to be  
displayed. If this happens, restart the  
computer by turning off and on the  
power with the power switch and use  
the correct password on reboot.  
If the Password on Resume is Enabled  
and the Password on Boot is Disabled  
you will not have to type your password  
upon resuming the system from the  
Suspend or Save-to-Disk modes. Power  
Management Security will work only if  
Password on Boot is enabled.  
The following tables show the names of the menu fields  
for the Security menu and its submenus, all the options  
for each field, the default settings and a description of the  
field's function and any special information needed to  
help understand the field's use. The default condition is  
no passwords required and no write protection.  
If you set a password, write it down and  
keep it in a safe place. If you forget the  
password you will have to contact your  
support representative to regain access to  
your secured functions and data.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Boot  
Info  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press <Enter> key to  
set Supervisor Password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length  
Password on Boot:  
On Automatic Wake up:  
KB Lock on Resume:  
Boot from Removable Media:  
Flash Write:  
[Enter]  
[Enter]  
[0]  
[Disabled]  
[Disabled]  
[Disabled]  
[All]  
Then password entry is  
required to enter BIOS  
Setup.  
[Enabled]  
Hard Disk Security  
Owner Information  
Security Chip Setting  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 11. Security Menu  
17  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Table 11: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the system supervisor  
password is set and Clear when it is not.  
User Password is:  
–—  
–—  
Clear  
A display-only field. Set is displayed when the general user password is  
set, and Clear when it is not.  
Set Supervisor  
Password  
[Enter]  
Sets, changes or cancels the Supervisor Password. Supervisor Password  
may be up to seven characters long and must include only letters or num-  
bers (no symbols). Passwords are NOT case-sensitive. To cancel a pass-  
word press the Enter key instead of entering characters in the Enter New  
Password field and in the Re-enter New Password field. When a Supervi-  
sor Password is set it must be used to access the BIOS setup utility.  
Set User Password  
–—  
–—  
[Enter]  
Can only be accessed if Supervisor Password is set. Sets, changes or  
cancels User Password, which may be up to seven characters long and  
must include only letters or numbers (no symbols). Passwords are NOT  
case-sensitive. To cancel a password press [Enter] key instead of entering  
characters in the Enter New Password and Re-enter New Password fields.  
When a User Password is set it must be used to access the BIOS utility.  
Minimum User  
[0]  
Can only be accessed if Supervisor Password is set. Set the minimum  
Password Length:  
length for User Password.  
Password on Boot:  
Disabled  
First Boot  
Every Boot  
[Disabled]  
When Disabled, no password is required. When set to First Boot, pass-  
word entry required only before first boot. When Every Boot is selected,  
password required whenever the system is booted.  
[Disabled]  
On Automatic  
Wake up:  
Disabled  
Enabled  
When Disabled, a password is not required on LAN or RTC automatic  
wake up. When Enabled, password is required on automatic wake up.  
KB Lock on Resume:  
Disabled  
Enabled  
[Disabled]  
[All]  
When Enabled, PS/2 keyboard or mouse inputs are locked out at Resume  
From Suspend or Save-to-Disk until entering password.  
Boot from  
Removable Media:  
All  
Supervisor  
only  
When Supervisor Only is selected, only the Supervisor can boot from  
removable media. Only the user who enters the Supervisor Password  
before OS boot is treated as the Supervisor. When All is selected, boot  
from removable media is not restricted.  
Flash Write:  
Disabled  
Enabled  
[Enabled]  
–—  
When disabled, the BIOS Flash Memory is write-protected; when  
enabled, it is not.  
Hard Disk Security:  
Owner Information  
Security Chip Setting  
–—  
–—  
___  
When selected, opens the Hard Disk Security submenu, which allows you  
to configure hard disk security features.  
–—  
When selected, opens the Owner Information submenu, which allows  
you to set Owner information.  
___  
When selected, opens the Security Chip Settings submenu, which allows  
you to set settings for the security chip.  
Exiting from the Security Menu  
When you finish setting the parameters on the Security Menu, you can either exit from setup utility or move to another  
menu. To exit from setup utility, press [Esc] key to go to Exit Menu. To move to another menu, use the cursor keys.  
18  
 
S e c u r i t y M e n u  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security submenu is for configuring hard disk security features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Primary Master Password Is:  
Set Primary Master Password:  
Password Entry on Boot:  
Clear  
[Enter]  
[Enabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter  
Select  
Sub-Menu  
Figure 12. Hard Disk Security Submenu  
Table 12: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Menu Field  
Default  
Description  
Primary Master  
Password Is:  
Clear  
A display-only field. Set is displayed when the Master Password is set and Clear when  
it is not.  
Set Primary  
Master  
Password  
[Enter]  
Sets, changes or cancels Primary Master Password. The Primary Master Password  
may be up to seven characters long and include only letters or numbers (no symbols).  
Passwords are NOT case- sensitive. To cancel a password press the Enter key instead  
of entering characters in the Enter New Password field and in the Re-enter New Pass-  
word field. When a Primary Master Password is set it must be used to access the hard  
disk. Data on the hard disk cannot be read on other systems.  
Password Entry  
on Boot:  
[Enabled]  
When set to Disabled, it is not necessary to enter a Hard Disk Password before  
booting the OS. The hard disk is still password-protected without password entry.  
19  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
Owner Information Submenu of the Security Menu  
The Owner Information submenu is for setting owner information.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Item Specific Help  
Owner Information  
Owner Information Is:  
Set Owner Information  
Clear  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 13. Owner Information Submenu  
Table 13: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Owner Information Is:  
–—  
Clear  
Display only. (Will only be  
displayed if the Supervisor  
Password is set).  
Set Owner  
Information:  
–—  
[Enter]  
[Gray]  
Field to write owner  
information, i.e. name.  
Foreground Color:  
Black  
Blue  
Brown  
White  
Light Cyan  
Light Red  
Green  
Cyan  
Red  
Gray  
Light Blue  
Light Green  
Light Magenta  
Yellow  
Bright White  
Magenta  
Background Color:  
Black  
Blue  
Brown  
White  
Light Cyan  
Light Red  
[Black]  
Green  
Cyan  
Red  
Gray  
Light Blue  
Light Green  
Light Magenta  
Yellow  
Bright White  
Magenta  
20  
 
S e c u r i t y M e n u  
Security Chip Setting Submenu of the Security Menu  
The Security Chip Setting Security submenu is for configuring security chip features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Select Security Chip  
enabled or disabled.  
Security Chip:  
Clear Security Chip  
[Enabled]  
[Enter]  
* A reboot is required  
after exit to configure  
Security Chip correctly.  
Clear Security Chip  
becomes selectable  
after the reboot.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 14. Table 16: Security Chip Setting Submenu  
Table 16: Fields, Options, and Defaults for the Security Chip Setting Submenu of the Security Menu  
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.  
Menu Field  
Options  
Default  
Description  
Security Chip:  
[Disabled]  
Allows you to enable or disable the Security Chip. When disabled,  
the following field does not appear.  
Disabled  
Enabled  
Clear Security Chip  
____  
[Enter]  
Allows you to clear the security chip. Note that if you clear the  
security chip, you will not be able to access data that has already  
been encrypted.  
21  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
BOOT MENU - SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the  
instructions for Navigating Through the Setup Utility to make any changes. The tables show the names of the menu  
fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the  
field's function and any special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Item Specific Help  
Quick Boot:  
Boot Time Diagnostic Screen:  
Boot Menu:  
Preboot Execution Environment  
Boot Device Priority  
[Enabled]  
[Disabled]  
[Enabled]  
[Disabled]  
[Disabled]  
All diagnostic tests  
will be done.  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Boot Menu  
Table 15: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
QuickBoot:  
Disabled  
Enabled  
[Enabled]  
Turns on and off booting with a truncated set of Power  
On Self Test. (Fewer tests mean faster turn on.)  
Boot-time Diagnostic  
Screen:  
Disabled  
Enabled  
[Disabled]  
[Enabled]  
Turns on and off display of test results instead of Fujitsu  
logo screen during Power On Self Test.  
Boot Menu:  
Disabled  
Enabled  
This field is not active unless the Supervisor’s Password has  
been set. When disabled, access to the Boot Menu with the  
[F12] key is disabled. When enabled, the Boot Menu is  
enabled and the [F12] key will allow you to display it.  
Preboot Execution  
Environment  
Disabled  
Enabled  
[Disabled]  
Turns off and on the preboot execution environment  
feature.  
Boot Device Priority  
Selects Boot  
Device Priority  
submenu  
This menu allows setting up the source for the operating  
system.  
22  
 
B o o t M e n u  
Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Boot Device Priority  
Item Specific Help  
Keys used to view or  
configure devices:  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
<Enter> expands or  
collapses devices with  
a + or -.  
<Ctrl+Enter> expands  
all.  
<Shift+1> enables or  
disables a device.  
<+>/<Space> or <->  
moves the device up or  
down.  
<d> removes a device  
that is not installed.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 16. Boot Device Priority Submenu  
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Description  
+Floppy Disk Drive  
+Hard Disk Drive  
CD-ROM Drive  
The boot selections determine the order in which the BIOS searches for the operating  
system during a startup sequence. To change the order highlight one source by using  
the [up] or [down] cursor keys and then press the [+] or [-] key to change the order  
number for that source. Be sure to save your changed order when you exit the BIOS  
setup utility.  
Exiting from Boot Menu  
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to  
move to another menu, use the cursor keys.  
23  
 
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S  
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display-only screen that provides the  
configuration information for your notebook.  
The information displayed on this screen is  
variable according to the unit you  
purchased.  
The following table shows the names of the menu fields  
for the Info menu and the information displayed in those  
fields. These fields are for information purposes only, and  
are not editable.  
PhoenixBIOS Setup Utility  
Security Power Savings  
Main  
Advanced  
Boot  
Info  
BIOS Version:  
BIOS Date:  
BIOS Area:  
1.08  
10/11/2005  
E000h - FFFFh  
CPU Type:  
CPU Speed:  
L1 Cache:  
L2 Cache:  
Intel(R) Pentium(R) M processor Ultra Low Voltage 753  
1.20 GHz  
64 KB  
2048 KB  
Total Memory:  
Memory Slot:  
256 MB  
256 MB DDR2 SDRAM  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 17. Info Menu  
Table 17: Fields, Options and Defaults for None  
Menu Field  
BIOS Version:  
BIOS Date:  
BIOS Area:  
Default  
Menu Field  
L1 Cache:  
Default  
1.xx  
64 KB  
mm/dd/yyyy  
L2 Cache:  
2048 KB  
E000h – FFFFh  
Total Memory:  
Memory Slot:  
256 MB  
CPU Type:  
Intel(R) Pentium(R) M processor  
Ultra Low Voltage 753  
256 MB DDR2 SDRAM  
CPU Speed:  
1.20 GHz  
24  
 
E x i t M e n u  
EXIT MENU - LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating through the Setup Utility to  
make any changes. The table shows the names of the menu fields for the Exit menu and a description of the field's func-  
tion and any special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Save Changes  
Save Changes and Power Off  
Exit System Setup and  
save your changes to  
CMOS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 18. Exit Menu  
Table 18: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Description  
Exit Saving  
Changes  
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then  
exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed.  
Exit Discarding  
Changes  
Selecting Exit Discarding Changes and Exit will exit the setup utility immediately without writing to the BIOS memory  
and without displaying a confirmation screen. When the BIOS recognizes this selection it will load the operating system  
and begin operation.  
Load Setup  
Defaults  
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message  
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit Menu. To return to  
another menu follow the directions in the Navigating through the Setup Utility section.  
Discard  
Changes  
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previ-  
ous configuration now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To  
return to another menu, follow the directions in the Navigating through the Setup Utility section.  
Save Changes  
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save  
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit  
menu. To return to another menu, follow the directions in the Navigating through the Setup Utility section.  
Save Changes  
and Power Off  
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory, then  
power the system off. The message Save configuration changes now and power off? [Yes] [No]  
will be displayed. When confirmed, the setup utility shut down the system.  
25  
 

Echo Tablet Accessory 99944200130 22 User Manual
Echo Trimmer SRM 260S User Manual
Educational Insights Handheld Game System EI 7881 User Manual
Electro Voice Speaker System SL12 2H User Manual
Euro Pro Sewing Machine 385X User Manual
Everpure Water System CB20 124E User Manual
Finlandia Electric Heater JM 17 User Manual
Freestyle Watch 39401 User Manual
Geemarc Clock Large Display Alarm Clock User Manual
Genie Garage Door Opener 3024 User Manual