Nokia 6020 User Manual

Nokia 6020 user guide

EN 9236467

Issue 1

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from

the US and other countries. Diversion contrary to law is prohibited.

EN 9236467/Issue 1

Content

FOR YOUR SAFETY ............................................................................................ 12

General information.......................................................................................... 14

About your device .................................................................................................................................... 14

Overview of the functions of the phone............................................................................................ 15

Shared memory...................................................................................................................................... 15

Nokia PC Suite software......................................................................................................................... 16

Access codes.............................................................................................................................................. 16

Security code (5 to 10 digits)............................................................................................................ 16

PIN and PIN2 codes (4 to 8 digits), module PIN, and signing PIN.......................................... 17

PUK and PUK2 codes (8 digits).......................................................................................................... 17

Barring password (4 digits)................................................................................................................ 17

Wallet code (4 to 10 digits)............................................................................................................... 17

Network services....................................................................................................................................... 19

Configuration settings service .......................................................................................................... 19

Downloading content and applications............................................................................................. 20

Nokia support on the Web..................................................................................................................... 21

1.Getting started .............................................................................................. 22

Installing the SIM card and the battery............................................................................................. 22

Charging the battery............................................................................................................................... 24

Switching the phone on and off.......................................................................................................... 24

Normal operating position..................................................................................................................... 25

Putting on a wrist strap.......................................................................................................................... 26

2.Your phone..................................................................................................... 27

Keys and connectors................................................................................................................................ 27

Standby mode............................................................................................................................................ 28

Wallpaper................................................................................................................................................ 29

Screen saver............................................................................................................................................ 30

Power saving .......................................................................................................................................... 30

Essential indicators............................................................................................................................... 30

Keypad lock (Keyguard) .......................................................................................................................... 32

3.Call functions ................................................................................................ 33

Making a call............................................................................................................................................. 33

Speed dialling a phone number........................................................................................................ 34

Answering or rejecting an incoming call........................................................................................... 34

Call waiting............................................................................................................................................. 34

Options during a call............................................................................................................................... 34

Writing text................................................................................................................................................ 35

Setting predictive text input on or off............................................................................................ 35

Using predictive text input................................................................................................................. 36

Writing compound words................................................................................................................ 36

Using traditional text input ............................................................................................................... 37

Tips for writing text.............................................................................................................................. 37

4.Using the menu ............................................................................................. 39

Accessing a menu function ................................................................................................................... 39

List of menu functions............................................................................................................................ 40

5.Menu functions............................................................................................. 50

Messages..................................................................................................................................................... 50

Text messages (SMS)............................................................................................................................ 50

Writing and sending messages...................................................................................................... 51

Options for sending a message...................................................................................................... 52

Reading and replying to an SMS message or an SMS e-mail.............................................. 52

Inbox and sent items folders.......................................................................................................... 53

Templates............................................................................................................................................. 53

Saved items folder and My folders............................................................................................... 54

Multimedia messages (MMS)............................................................................................................ 54

Writing and sending a multimedia message............................................................................. 55

Reading and replying to a multimedia message ...................................................................... 57

Inbox, Outbox, Saved and Sent items folders............................................................................ 57

Multimedia messages memory full .............................................................................................. 58

Flash messages ...................................................................................................................................... 58

Writing a flash message.................................................................................................................. 58

Receiving a flash message.............................................................................................................. 58

Instant messages (Chat)...................................................................................................................... 59

Entering the instant messaging menu......................................................................................... 60

Connecting to and disconnect from the instant messaging service................................... 61

Starting an instant messaging conversation............................................................................. 61

Accepting or rejecting an invitation............................................................................................ 62

Reading an instant message .......................................................................................................... 62

Participating in a conversation ..................................................................................................... 63

Editing your own settings............................................................................................................... 63

Contacts for instant messaging .................................................................................................... 64

Blocking and unblocking messages.............................................................................................. 64

Groups................................................................................................................................................... 64

Instant messaging settings............................................................................................................. 65

E-mail application ................................................................................................................................ 66

Writing and sending an e-mail...................................................................................................... 66

Downloading e-mail from your e-mail account....................................................................... 66

Reading and replying to an e-mail............................................................................................... 67

Inbox and Other folders (Drafts, Archive, Outbox and Sent items)..................................... 67

Deleting e-mail .................................................................................................................................. 67

Voice messages...................................................................................................................................... 68

Info messages......................................................................................................................................... 68

Service commands................................................................................................................................ 68

Deleting all messages from a folder................................................................................................ 69

Message settings................................................................................................................................... 69

Settings for text and SMS e-mail messages.............................................................................. 69

Settings for multimedia messages ............................................................................................... 70

Settings for e-mail application ..................................................................................................... 71

Common settings............................................................................................................................... 72

Message counter................................................................................................................................... 73

Call register................................................................................................................................................ 73

Recent calls lists.................................................................................................................................... 73

Counters and timers for calls, data and messages...................................................................... 74

Positioning information ...................................................................................................................... 75

Contacts...................................................................................................................................................... 75

Selecting settings for contacts ......................................................................................................... 75

Saving names and phone numbers (Add contact)....................................................................... 76

Saving multiple numbers or items per name................................................................................ 76

Adding an image to a name or number in contacts................................................................... 77

Searching for a contact....................................................................................................................... 78

Editing or deleting details .................................................................................................................. 79

My presence............................................................................................................................................ 79

Subscribed names ................................................................................................................................. 82

Adding contacts to the subscribed names................................................................................. 82

Viewing the subscribed names...................................................................................................... 82

Unsubscribing a contact.................................................................................................................. 83

Copying contacts................................................................................................................................... 84

Sending and receiving a business card........................................................................................... 84

Speed dials.............................................................................................................................................. 85

Voice dialling.......................................................................................................................................... 85

Adding and managing voice tags.................................................................................................. 86

Making a call by using a voice tag............................................................................................... 86

Service numbers .................................................................................................................................... 87

My numbers............................................................................................................................................ 87

Caller groups .......................................................................................................................................... 87

Settings...................................................................................................................................................... 88

Profiles ..................................................................................................................................................... 88

Themes ..................................................................................................................................................... 89

Tone settings.......................................................................................................................................... 89

Personal shortcuts ................................................................................................................................ 89

Right selection key............................................................................................................................ 90

Go to options...................................................................................................................................... 90

Voice commands................................................................................................................................ 90

Display settings...................................................................................................................................... 91

Time and date settings........................................................................................................................ 92

Call settings............................................................................................................................................ 92

Phone settings ....................................................................................................................................... 93

Connectivity............................................................................................................................................ 94

Infrared................................................................................................................................................. 94

(E)GPRS................................................................................................................................................. 95

(E)GPRS connection .......................................................................................................................... 96

(E)GPRS modem settings................................................................................................................. 96

Enhancement settings......................................................................................................................... 97

Configuration settings......................................................................................................................... 98

Security settings.................................................................................................................................... 99

Restore factory settings................................................................................................................... 100

Operator menu....................................................................................................................................... 101

Gallery....................................................................................................................................................... 101

Media........................................................................................................................................................ 102

Camera.................................................................................................................................................. 102

Taking a photo or a video clip..................................................................................................... 103

Camera settings.............................................................................................................................. 104

Voice recorder ..................................................................................................................................... 105

Recording.......................................................................................................................................... 105

List of recordings............................................................................................................................ 105

Push to talk............................................................................................................................................. 106

Push to talk menu.............................................................................................................................. 107

Connecting to and disconnecting from the push to talk service......................................... 107

Callback requests ............................................................................................................................... 108

Making and receiving a push to talk call.................................................................................... 109

Adding one-to-one contacts .......................................................................................................... 111

Creating and setting up groups..................................................................................................... 112

Settings for push to talk .................................................................................................................. 114

Organiser.................................................................................................................................................. 115

Alarm clock.......................................................................................................................................... 115

When the alarm time expires...................................................................................................... 116

Calendar................................................................................................................................................ 116

Making a calendar note................................................................................................................ 117

When the phone sounds an alarm for a note......................................................................... 117

To-do list .............................................................................................................................................. 117

Notes...................................................................................................................................................... 118

Wallet.................................................................................................................................................... 118

Accessing the wallet menu.......................................................................................................... 119

Saving card details......................................................................................................................... 119

Personal notes................................................................................................................................. 120

Creating a wallet profile............................................................................................................... 120

Wallet settings................................................................................................................................ 121

Guidelines for paying for your purchases with the wallet ................................................. 121

Synchronisation.................................................................................................................................. 122

Synchronising from your phone................................................................................................. 122

Settings for the synchronisation from your phone............................................................... 123

Synchronising from your compatible PC.................................................................................. 123

Applications ............................................................................................................................................ 124

Games and applications................................................................................................................... 124

Launching a game or an application ........................................................................................ 124

Game and application downloads ............................................................................................. 125

Game settings.................................................................................................................................. 125

Memory status for games and applications............................................................................ 125

Calculator............................................................................................................................................. 126

Countdown timer............................................................................................................................... 126

Stopwatch............................................................................................................................................ 127

Web ........................................................................................................................................................... 128

Basic steps for accessing and using services ............................................................................. 129

Setting up the phone for a service................................................................................................ 129

Making a connection to a service................................................................................................. 130

Browsing the pages of a service.................................................................................................... 130

Using the phone keys while browsing...................................................................................... 131

Options while browsing................................................................................................................ 131

Direct calling.................................................................................................................................... 131

Disconnect from a service ............................................................................................................... 132

Appearance settings of the browser............................................................................................. 132

Cookies.................................................................................................................................................. 133

Bookmarks............................................................................................................................................ 133

Receiving a bookmark................................................................................................................... 134

Downloading ....................................................................................................................................... 134

Service inbox....................................................................................................................................... 134

Service inbox settings ................................................................................................................... 135

Cache memory .................................................................................................................................... 135

Browser security................................................................................................................................. 136

Security module.............................................................................................................................. 136

Certificates....................................................................................................................................... 137

Digital signature............................................................................................................................. 138

SIM services............................................................................................................................................ 139

6.PC Connectivity ........................................................................................... 140

PC Suite.................................................................................................................................................... 140

(E)GPRS, HSCSD and CSD ................................................................................................................ 142

Using data communication applications........................................................................................ 142

7.Battery information..................................................................................... 143

Charging and Discharging................................................................................................................... 143

CARE AND MAINTENANCE............................................................................. 145

ADDITIONAL SAFETY INFORMATION............................................................. 147

FOR YOUR SAFETY

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Don't

touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed to clear the display and return to the start screen. Key in the emergency

number, then press

permission to do so.

. Give your location. Do not end the call until given

General information

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900,

GSM 1800 and GSM 1900 network. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless device use may cause interference or danger.

Your device and its enhancements may contain small parts. Keep them

out of the reach of small children.

For availability of approved enhancements, please check with your dealer. When

you disconnect the power cord of any enhancement, grasp and pull the plug, not

the cord.

■ Overview of the functions of the phone

The Nokia 6020 phone provides many functions that are practical for daily use,

such as a calendar, a clock, an alarm clock and a built-in camera. Your phone

supports:

• Multimedia messaging, see Multimedia messages (MMS) on page 54.

• Instant messages, see Instant messages (Chat) on page 59.

• Polyphonic sound (MIDI) that consists of several sound components played at

the same time. The phone supports Scalable Polyphonic MIDI (SP-MIDI)

format.

• E-mail, see E-mail application on page 66.

•

Audible alerts to check the battery status and the network status via acoustic

signals, see Voice commands on page 90.

• Presence-enhanced contacts, see My presence on page 79.

• EDGE (Enhanced Data rates for GSM Evolution), see (E)GPRS on page 95.

• Push to talk, see Push to talk on page 106.

• Java 2 Micro Edition, J2ME^TM, see Applications on page 124.

• XHTML browser, see Web on page 128.

Shared memory

The following features in this device may share memory: contacts, text messages,

instant messages and SMS e-mail, voice tags, calendar and notes. Use of one or

more of these features may reduce the memory available for the remaining

features sharing memory. For example, saving many SMS e-mail may use all of the

available memory. Your device may display a message that the memory is full

when you try to use a shared memory feature. In this case, delete some of the

information or entries stored in the shared memory features before continuing.

Some of the features, such as contacts, text messages, instant messages and SMS

e-mail may have a certain amount of memory specially allotted to them in

addition to the memory shared with other features.

■ Nokia PC Suite software

With the Nokia PC Suite software you can, for example, manage the photos

captured with the phone’s camera and handle ringing tones and wallpapers. Nokia

PC Suite is available on Nokia’s Web site at www.nokia.com.

■ Access codes

Security code (5 to 10 digits)

The security code helps to protect your phone against unauthorised use. The pre-

set code is 12345. Change the code, and keep the new code secret and in a safe

place separate from your phone. To change the code, and to set the phone to

request the code, see Security settings on page 99.

If you key in an incorrect security code five times in succession, the phone ignores

further entries of the code. Wait for 5 minutes and key in the code again.

PIN and PIN2 codes (4 to 8 digits), module PIN, and signing PIN

• The PIN (Personal Identification Number) code, supplied with your SIM card,

helps to protect your SIM card against unauthorised use. See Security settings

on page 99.

• The PIN2 code may be supplied with the SIM card and is required to access

some functions, such as call counters.

• The module PIN is required to access the information in the security module of

your SIM card. See Security module on page 136.

• The signing PIN is required for the digital signature. See Digital signature on

page 138.

PUK and PUK2 codes (8 digits)

The PUK (Personal Unblocking Key) code is required to change a blocked PIN code.

The PUK2 code is required to change a blocked PIN2 code.

Barring password (4 digits)

The barring password is required when using the Call barring service. See Security

settings on page 99.

Wallet code (4 to 10 digits)

The wallet code is required to access the wallet services. For further information,

see Wallet on page 118.

Note: If the codes or passwords are not supplied with the SIM card,

contact your local service provider.

■ Network services

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These Network Services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize

Network Services. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks may

have limitations that affect how you can use Network Services. For instance, some

networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Your

device may also have been specially configured for your network provider. This

configuration may include changes in menu names, menu order and icons.

Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP

protocols. Some features of this device, such as multimedia messages, e-mail

application, instant messages, presence service, Java games and applications and

Internet services require network support for these technologies.

Configuration settings service

To use some of the network services, such as mobile Internet services, MMS,

Instant messages, E-Mail application, or Synchronisation, your phone needs the

correct configuration settings. You may receive the settings directly as a

configuration message and you need to save the settings on your phone. The

service provider may provide a PIN that is needed to save the settings. For more

information on the availability of the settings, contact your network operator,

service provider, nearest authorised Nokia dealer or visit the support area on the

Nokia Web site, www.nokia.com.

When you have received a configuration message Configuration sett. received is

displayed. To view the received settings, press Show.

• To save the received settings, press Save. If the phone asks Enter settings' PIN:,

key in the PIN code for the settings and press OK. Set these settings as the

default or not. For availability of the PIN code, contact the service provider

that supplies the settings.

• To discard the received settings, press Discard.

To view and edit the settings see Configuration settings on page 98.

■ Downloading content and applications

You may be able to download new content (for example images and video clips)

and applications into the phone (network service).

1. Select the download function for example in the Collection and Gallery menus.

To access the download function, see the respective menu descriptions.

A list of bookmarks is shown. Select More bookmarks if you want to view the

bookmarks available in the Web menu.

2. Select the bookmark of the browser page that you want to access. If the

connection fails, change the active set of connection settings in the Web menu

and try the connection again. Follow the instructions provided by the service.

For the availability of different services, pricing and tariffs, contact your

network operator and/or the service provider.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

■ Nokia support on the Web

Check www.nokia.com/support or your local Nokia Web site for the latest version

of this guide, additional information, downloads, and services related to your

Nokia product.

1. Getting started

■ Installing the SIM card and the battery

Keep all SIM cards out of the reach of small children. For availability and information on

using SIM card services, contact your SIM card vendor. This may be the service provider,

network operator, or other vendor.

Note: Always switch off the power and disconnect the charger and any other

device before removing the cover. Avoid touching electronic components while

changing the cover. Always store and use the device with the covers attached.

1.To remove the back cover of the phone:

Push the back cover release button (1) and slide

the back cover towards the bottom of the phone

(2). When the back cover is released, take it off

the phone.

2. Remove the battery by

lifting it as shown. Insert

the SIM card into the SIM

card holder until it snaps

into position. Make sure

that the SIM card is

properly inserted and that the golden contact area on the card is facing

downwards.

3. To remove the SIM card press the SIM card

release (1) and slide the SIM card towards the

top of the phone (2).

4. Position the battery with the contacts aligned

to the golden contacts of the phone. Insert the

battery into the battery slot.

5. Align the back cover on the back of the phone

(1) with a gap above the top of the back cover of

approximately 3 mm. Push the back cover up to

the top of the phone to lock it (2).

■ Charging the battery

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

Check the model number of any charger before use with this device. This device is

intended for use when supplied with power from ACP-7and ACP-12 chargers.

1.Connect the lead from the charger

to the socket on the bottom of your phone.

2. Connect the charger to an AC wall socket.

If the battery is completely empty, it may

take a few minutes before the charging

indicator appears on the display or before

any calls can be made.

The charging time depends on the charger and the battery used. For example,

charging a battery with the ACP-12 charger takes approximately 1 hour and 20

minutes while the phone is in standby mode.

■ Switching the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Press and hold the power key

as shown.

Note that if the phone displays Insert SIM card even though

the SIM card is properly inserted, or SIM card not supported,

contact your network operator or service provider. Your phone

does not support 5-Volt SIM cards and the card may need to

be changed.

If the phone asks for a PIN or security code, enter the code

supplied with your SIM card (displayed as ****), and press OK.

See also Go to options on page 90.

5. The middle selection key in standby mode is Menu.

6. The right selection key in standby mode is Names to access the Contacts menu

or another shortcut to a function you can select. See Personal shortcuts on

page 89. Or the key has an operator-specific name to access an operator-

specific web site.

Wallpaper

You can set your phone to display a background picture, wallpaper, when the

phone is in standby mode. See Display settings on page 91.

Screen saver

You can set your phone to display a screen saver, when the phone is in standby

mode. See Display settings on page 91.

Power saving

For power saving, a digital clock view overwrites the display when

no phone function has been used for a certain period of time. Press

any key to deactivate the screen saver. If you have not set the

time, 00:00 is displayed.

Essential indicators

You have received one or several text, picture or multimedia messages.

See Reading and replying to an SMS message or an SMS e-mail on page

52 or Reading and replying to a multimedia message on page 57.

The phone has registered a missed call. See Call register on page 73.

Your phone is connected to the instant messaging service and the

availability status is online or offline, respectively. See Connecting to and

disconnect from the instant messaging service on page 61.

You have received one or several instant messages and you are connected

to the instant messaging service. See Connecting to and disconnect from

the instant messaging service on page 61.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 32.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tone settings on page 89.

The alarm clock is set to On. See Alarm clock on page 115.

When the (E)GPRS connection mode Always online is selected and the

(E)GPRS service is available, the indicator is shown on the top left of the

display. See (E)GPRS connection on page 96.

When the (E)GPRS connection is established, the indicator is shown on

the top left of the display. See (E)GPRS connection on page 96 and

Browsing the pages of a service on page 130.

The (E)GPRS connection is suspended (on hold), for example if there is an

incoming or outgoing call during the (E)GPRS dial-up connection.

The loudspeaker has been activated, see Options during a call on page 34.

Calls are limited to a closed user group. See Security settings on page 99.

A headset, handsfree, loopset or music stand is connected.

Push to talk connection is active or suspended.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys from being accidentally pressed.

Press Menu or Unlock and then

keypad. To answer a call when the keyguard is on, press

within 1.5 seconds to lock or unlock the

. During a call, the

phone can be operated normally. When you end or reject the call, the keypad will

automatically be locked. For Automatic keyguard, see Phone settings on page 93.

When the keypad lock is on, calls still may be possible to the official emergency number

programmed into your device.

3. Call functions

■ Making a call

1. Key in the phone number, including the area code. If you key in an incorrect

character, press Clear to delete it.

For international calls, press

twice for the international prefix (the +

character replaces the international access code) and then key in the country

code, the area code without the leading 0, if necessary, and the phone number.

2. Press

3. Press

to call the number.

to end the call or to cancel the call attempt.

Making a call using the contacts

To search for a name or phone number that you have saved in Contacts, see

Searching for a contact on page 78. Press

to call the number.

Last number redialling

In standby mode, press

once to access the list of up to 20 numbers you last

called or attempted to call. Scroll to the number or name that you want, and press

to call the number.

Calling your voice mailbox

In standby mode, press and hold

, or press

and

If the phone asks for the voice mailbox number, key it in and press OK. See also

Voice messages on page 68.

Speed dialling a phone number

Assign a phone number to one of the speed-dialling keys, from

, see

Speed dials on page 85. Call the number in either of the following ways:

• Press the speed-dialling key that you want and then press

• If Speed dialling is set to on, press and hold a speed-dialling key until the call is

started. See Call settings on page 92.

■ Answering or rejecting an incoming call

Press

to answer an incoming call and press

to end the call.

Press

to reject an incoming call. If you press Silence, only the ringing tone is

muted. Then either answer or reject the call.

Call waiting

During a call, press

to answer the waiting call. The first call is put on hold.

Press

to end the active call. To activate the Call waiting function, see Call

settings on page 92.

■ Options during a call

Many of the options that you can use during a call are network services. For

availability, contact your network operator or service provider.

Press Options during a call for some of the following options:

Mute or Unmute, Contacts, Menu, Record, Lock keypad, Auto volume on or Auto

volume off, Loudspeaker or Handset, and the network services Answer and Reject,

Hold or Unhold, New call, Send DTMF (to send tone strings), Swap (to switch

between the active call and the call on hold), Transfer (to connect a call on hold to

an active call and disconnect yourself), Conference (to set up a conference call),

Private call (to discuss privately in a conference call), End call, and End all calls.

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

■ Writing text

You can key in text using traditional or predictive text input.

When you are writing text, predictive text input is indicated by

and

traditional text input by

at the top left of the display. The character case is

, or . You can change the character case by

indicated by

pressing

. The number mode is indicated by

, and you can change

between the letter and number mode by pressing and holding

Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set predictive text input on, select a language in the dictionary options list.

Predictive text input is only available for the languages on the list.

• To revert to traditional text input, select Dictionary off.

Using predictive text input

You can key in any letter with a single key press. Predictive text input is based on a

built-in dictionary to which you can also add new words.

1. Start writing a word using the keys

. Press each key only once for

a single letter. The word changes after each keystroke.

Example: To write Nokia when the English dictionary is selected, press

and

For more instructions on writing text, see Tips for writing text on page 37.

2. When you have finished writing the word and it is correct, confirm it by adding

a space with or by moving the joystick up, down, left or right. Moving the

joystick also moves the cursor.

If the word is not correct, press

repeatedly or press Options and select

Matches. When the word that you want appears, confirm it.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the word and move the joystick to the right, then write the

last part of the word.

Using traditional text input

Press a number key,

, repeatedly until the desired character appears.

Not all characters available under a number key are printed on the key. The

characters available depend on the language selected in the Phone language

menu, see Phone settings on page 93.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or move the joystick up, down, left or right and then

key in the letter.

•

The most common punctuation marks and special characters are available

under the number key

For more instructions on writing text, see Tips for writing text on page 37.

Tips for writing text

The following functions may also be available for writing text:

• To insert a space, press

• Move the cursor to the left, right, down or up with the joystick.

• To insert a number while in letter mode, press and hold the desired number key.

• To delete a character to the left of the cursor, press Clear. Press and hold Clear

to delete the characters more quickly. To delete all the characters at once

when writing a message, press Options and select Clear text.

•

To quickly set predictive text input on or off when writing text, press and hold

Options.

• To insert a word when using predictive text input, press Options and select

Insert word. Write the word using traditional text input and press Save. The

word is also added to the dictionary.

• To insert a special character when using traditional text input, press

, or

when using predictive text input, press and hold

, or press Options and

select Insert symbol. Select the character and press Use.

• To insert a smiley when using traditional text input, press

twice, or when

again, or press

using predictive text input, press and hold

and press

Options and select Insert smiley. Select a smiley and press Use.

The following options are available when writing text messages:

• To insert a number while in letter mode, press Options and select Insert

number. Key in the phone number or search for it in Contacts and press OK.

• To insert a name from Contacts, press Options and select Insert contact. To

insert a phone number or a text item attached to the name, press Options and

select View details.

4. Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus.

■ Accessing a menu function

1. To access the menu, press Menu.

2. Use the joystick to scroll through the menu and select, for example, Settings by

pressing Select. To change the menu view, see Menu view in Display settings

on page 91.

3. If the menu contains submenus, select the one that you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

■ List of menu functions

• Messages

1. Create message

1. Text message

2. Multimedia msg.

3. Flash message

2. Inbox

3. Outbox

4. Sent items

5. Saved items

1. Text messages

2. Multimedia msgs.

6. Instant messages

1. Login

2. Saved convers.

3. Connect. settings

7. E-mail

1. Create e-mail

2. Retrieve

3. Disconnect

4. Inbox

5. Other folders

8. Voice messages

1. Listen to voice messages

1. In some countries this function may not be available.

2. Voice mailbox number

9. Info messages

1. Info service

2. Topics

3. Language

4. Info topics saved

on SIM card

5. Read

10.Service commands

11.Delete messages

12.Message settings

1. Text messages

2. Multimedia msgs.

3. E-mail messages

4. Other settings

13.Message counter

• Call register

1. Missed calls

2. Received calls

3. Dialled numbers

4. Delete recent call lists

1. All

2. Missed

1. This menu is shown only if any info messages are received.

3. Received

4. Dialled

5. Call duration

1. Last call duration

2. Received calls' duration

3. Dialled calls' duration

4. All calls' duration

5. Clear timers

6. GPRS data counter

1. Data sent in last session

2. Data received in last session

3. All sent data

4. All received data

5. Clear counters

7. GPRS connection timer

1. Duration of last session

2. Duration of all sessions

3. Clear timers

8. Positioning

• Contacts

1. Search

2. Add new contact

3. Delete

4. My presence

5. Subscribed names

6. Copy

7. Settings

1. Memory in use

2. Contacts view

3. Memory status

8. Speed dials

9. Voice tags

10.Service numbers

11.My numbers

12.Caller groups

• Operator menu

• Settings

1. Profiles

1. General

2. Silent

3. Meeting

4. Outdoor

5. My style 1

1. Shown if supported by your SIM card. For availability, contact your network operator or serv-

ice provider.

2. If Info numbers, Service numbers or both are not supported, the number of this menu item

changes accordingly.

3. If this menu is not shown the subsequent menu numbers change accordingly. The name de-

pends on the network operator.

6. My style 2

2. Themes

1. Select theme

2. Theme downloads

3. Tone settings

1. Incoming call alert

2. Ringing tone

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Instant message alert tone

7. Keypad tones

8. Warning tones

9. Alert for

10.Push to talk settings

4. Personal shortcuts

1. Right selection key

2. Select 'Go to' options

3. Organise 'Go to' options

4. Voice commands

5. Display settings

1. Wallpaper

2. Colour schemes

3. Menu view

4. Operator logo

5. Screen saver

6. Time and date settings

1. Clock

2. Date

3. Auto-update of date & time

7. Call settings

1. Automatic volume control

2. Call divert

3. Anykey answer

4. Automatic redial

5. Speed dialling

6. Call waiting

7. Summary after call

8. Send my caller ID

9. Line for outgoing calls

8. Phone settings

1. Phone language

2. Memory status

3. Automatic keyguard

4. Cell info display

5. Welcome note

6. Operator selection

7. Confirm SIM service actions

8. Help text activation

9. Start-up tone

9. Connectivity

1. Infrared

2. GPRS

1. For availability, contact your network operator or service provider.

10.Enhancement settings

1. Headset

2. Handsfree

3. Loopset

11.Configuration settings

1. Default configuration sett.ings

2. Activate default in all applications

3. Preferred access point

4. Personal configuration settings

12.Security settings

1. PIN code request

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

6. Access codes

7. Code in use

13.Restore factory settings

• Gallery

1. Images

2. Video clips

3. Themes

4. Graphics

1. This menu is shown only if the phone is or has been connected to a compatible enhancement

available for the phone.

5. Tones

6. Recordings

• Media

1. Camera

2. Voice recorder

• Push to talk

1. Switch PTT on

2. Callback inbox

3. Group list

4. Contacts list

5. Add group

6. PTT Settings

7. Config. Settings

8. Web

• Organiser

1. Alarm clock

1. Alarm time

2. Repeat alarm

3. Alarm tone

2. Calendar

3. To-do list

4. Notes

5. Wallet

6. Synchronisation

• Applications

1. Games

1. Select game

2. Game downloads

3. Memory

4. App. settings

2. Collection

1. Select application

2. App. downloads

3. Memory

3. Extras

1. Calculator

2. Countdown timer

3. Stopwatch

• Web

1. Nokia.com

2. Home

3. Bookmarks

4. Download links

1. Tone downloads

2. Graphic downloads

3. Game downloads

4. Video downloads

5. Theme downloads

6. App. downloads

5. Last web addr.

6. Service inbox

7. Settings

1. Configuration settings

2. Appearance settings

3. Security settings

4. Service inbox settings

8. Go to address

9. Clear the cache

• SIM services

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card.

5. Menu functions

■ Messages

The message services can only be used if they are supported by your

network or your service provider and you have subscribed to them.

Also appropriate settings need to be in place.

To select the font size for reading and writing messages, press Menu, and select

Messages, Message settings, Other settings and Font size.

Note: When sending messages, your phone may display the words Message sent.

This is an indication that the message has been sent by your device to the message

centre number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details about

messaging services, check with your service provider. Only devices that offer

compatible features can receive and display messages. The appearance of a

message may vary depending on the receiving device.

Important: Exercise caution opening messages. Messages may contain malicious

software or otherwise be harmful to your device or PC.

Text messages (SMS)

Using the short message service (SMS) your phone can send and receive multi-

part messages, which consist of several ordinary text messages (network service).

Invoicing may be based on the number of ordinary messages that are required for

a multi-part message.

Before you can send a message, you need to save some message settings. See

Settings for text and SMS e-mail messages on page 69.

You can also send and receive text messages that contain pictures. A picture

message can be a multi-part message.

The text messages function uses shared memory, see Shared memory on page 15.

Writing and sending messages

Your device supports the sending of text messages beyond the character limit for a single

message. Longer messages will be sent as a series of two or more messages. Your service

provider may charge accordingly. Characters that use accents or other marks, and characters

from some language options like Chinese, take up more space limiting the number of

characters that can be sent in a single message.

1. Press Menu, and select Messages, Create message and Text message.

2. Key in a message. See Writing text on page 35. To insert text templates or a

picture into the message, see Templates on page 53.

3. To send the message, press Send or

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes. See Settings for text and SMS e-mail

messages on page 69. Text messages are indicated with

4. Enter the recipient’s phone number or search for the phone number in

Contacts. Press OK to send the message.

Options for sending a message

After you have written a message, press Options and select Sending options. With

Send to many you can send the message to several recipients and to send a

message as an SMS e-mail (network service), select Send as e-mail. With Sending

profile you can use a predefined message profile to send the message. To define a

message profile, see Settings for text and SMS e-mail messages on page 69.

Reading and replying to an SMS message or an SMS e-mail

When you have received a message or an SMS e-mail, the indicator

and the

number of new messages followed by messages received are shown.

The blinking

indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages in the Inbox folder.

1. Press Show to view the new message, or press Exit to view it later.

If more than one message has been received, select the one that you want to

read. An unread text message or SMS e-mail is indicated by

2. While reading a message, press Options and select an option, for example, to

delete, forward or edit the message as a text message or an SMS e-mail,

rename the message you are reading or to move it to another folder. Select

Copy to calendar to copy text at the beginning of the message to your phone’s

calendar as a reminder note for the current day. Select Message details to

view, if available, the sender’s name and phone number, the message centre

used, and the date and time of receipt. Select Use detail to extract numbers, e-

mail addresses and Web site addresses from the current message.

When reading a picture message, select Save picture to save the picture in the

Templates folder.

3. Select Reply and the message type to reply to a message.

When replying to an SMS e-mail, confirm or edit the e-mail address and

subject first. Then write your reply message.

4. To send the message, press Send, and press OK to send the message to the

displayed number.

Inbox and sent items folders

The phone saves incoming text and multimedia messages in the Inbox folder. Sent

text messages are saved in the Sent items folder, if saving is activated, see

Settings for text and SMS e-mail messages on page 69.

Templates

Your phone includes text templates, indicated by , and picture templates,

indicated by

To access the template list, press Menu, and select Messages, Saved items, Text

messages and Templates.

• To insert a text template into the message or the SMS e-mail that you are

writing or replying to, press Options. Select Use template and select the

template that you want to insert.

• To insert a picture into the text message that you are writing or replying to,

press Options. Select Insert picture and select a picture to view it. Press Insert

to insert the picture into your message. The

indicator in the header of the

message indicates that a picture has been attached. The number of characters

that you can enter in a message depends on the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

Saved items folder and My folders

To organise your messages, you can move some of them to the Saved items folder,

or add new folders for your messages. While reading a message, press Options.

Select Move, scroll to the folder that you want to move the message to and press

Select.

To add or delete a folder, press Menu, and select Messages, Saved items, Text

messages and My folders. To add a folder if you have not saved any folder, press

Add. Otherwise, press Options and select Add folder. To delete a folder, scroll to

the folder that you want to delete, press Options and select Delete folder.

Multimedia messages (MMS)

A multimedia message can contain text, sound and a picture or a video clip. The

phone supports multimedia messages that are up to 100 KB in size. If the message

contains a picture, the phone scales it down to fit the display area. The wireless

network may limit the size of MMS messages. If the inserted picture exceeds this

limit, the device may make it smaller so that it can be sent by MMS.

The multimedia message function uses shared memory, see Shared memory on

page 15.

If Allow multimedia reception is set to Yes or In home network, your operator or

service provider may charge you for every message you receive. The default setting

to receive multimedia messages is generally on. See Settings for multimedia

messages on page 70.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, WBMP, BMP and PNG.

• Sound: Scalable Polyphonic MIDI (SP-MIDI), AMR audio and monophonic

ringing tones.

• Video clips in 3gp format with SubQCIF and QCIF resolution and AMR audio.

The phone does not necessarily support all variations of the aforementioned file

formats. If a received message contains any unsupported elements, they may be

replaced with the file name and the text Object format not supported.

Note that you are not able to receive any multimedia messages if you have a call

in progress, or a game or another Java application running. Because delivery of

multimedia messages can fail for a variety of reasons, do not rely solely upon them

for essential communications.

Writing and sending a multimedia message

To set the settings for multimedia messaging, see Settings for multimedia

messages on page 70. To check availability and to subscribe to the multimedia

messaging service, contact your network operator or service provider.

from being copied, modified, transferred or forwarded.

1. Press Menu, and select Messages, Create message and Multimedia msg..

2. Key in a message. See Writing text on page 35.

• To insert a file in the message, press Options, select Insert and select the

desired option from the Gallery or select Calendar note or Business card.

To move the text component to the top or bottom of the message, press

Options and select Place text first or Place text last.

• Your phone supports the sending and receiving of multimedia messages

that contain several pages (slides). To insert a slide in the message, press

Options, and select Insert and Slide. Each slide can contain text, one image

and one sound clip.

If the message contains several slides, you can open the desired one by

pressing Options and selecting Previous slide, Next slide or Slide list. To set

the interval between the slides, select Slide timing.

• The following options may also be available: Delete to delete an image,

slide or sound clip from the message, Preview or Save message. In More

options the following options may be available: Insert contact, Insert

number, Message details and Edit subject.

3. To send the message, press Send and select Phone number, E-mail address or

Many.

4. Enter the recipient’s phone number or e-mail address or search for it in

Contacts.

While the multimedia message is being sent,

is displayed and you can use

other functions on the phone. If there is an interruption while the message is

being sent, the phone tries to resend it a few times. If this fails, the message

will remain in the Outbox folder and you can try to resend it later.

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes. See Settings for multimedia messages

on page 70. Multimedia messages are indicated with

Reading and replying to a multimedia message

When your phone is receiving a multimedia message, t

is displayed. When the

message has been received,

and Multimedia message received are shown.

1. Press Show to view the message, or press Exit to view it later.

If more than one message has been received, select the one that you want to

read. An unread multimedia message is indicated by

2. Scroll to view the message. Press Options and some of the following options

may be available: Play presentation, View text, Open image, Open sound clip,

Open video clip, Save image, Save sound clip, Save video clip, Details, Delete

message, Reply, Reply to all, Forward, Edit, Message details.

See also options in Gallery, see Gallery on page 101.

Inbox, Outbox, Saved and Sent items folders

The phone saves the received multimedia messages in the Inbox folder.

Multimedia messages that have not yet been sent are moved to the Outbox folder.

The multimedia messages that you wish to send later can be saved in the Saved

items folder. The multimedia messages that have been sent are saved in the Sent

items folder of the Multimedia msgs. submenu if the setting Save sent messages is

set to Yes. See Settings for multimedia messages on page 70.

Multimedia messages memory full

When you have a new multimedia message waiting and the memory for the

messages is full,

blinks and Multimedia memory full, view waiting msg. is

shown. To view the waiting message, press Show. To save the message, press

Options, select Save message and delete old messages by first selecting the folder

and then the oId message to be deleted. To discard the waiting message, press Exit

and Yes. If you press No, you can view the message.

Flash messages

Flash messages are text messages that are instantly displayed upon reception.

Writing a flash message

Press Menu, and select Messages, Create message and Flash message. Write your

message. The maximum length of a flash message is 70 characters. To insert a

blinking text into the message, select Insert blink char. from the options list to set

a marker. The text behind the marker blinks until a second marker is inserted.

Receiving a flash message

Note: Only devices that offer compatible flash message features can receive and

display blinking flash messages.

A received flash message is not automatically saved. To read the message, press

Read. Press Options and select Use detail to extract phone numbers, e-mail

addresses and website addresses from the current message. To save the message,

press Save and select the folder in which you want to save the message.

Instant messages (Chat)

Instant messaging (Chat) is a way of sending short, simple text messages that are

delivered over TCP/IP protocols to online users (network service). Your contact list

shows you when the contacts on the list are online and available to participate in

an instant messaging conversation.

Before you can use instant messaging, you need to subscribe to the service. For

availability, charging and subscription to the service, contact your service

provider, from whom you also receive your unique ID and password and the

settings for instant messaging. For required settings, see Instant messaging

settings on page 65. The icons and texts on the display may vary depending on the

instant messaging service.

You can use the other functions of the phone while you have an active instant

messaging session in the background.

Instant messaging uses shared memory, see Shared memory on page 15.

Basic steps for instant messaging

• To enter the instant messaging menu (offline), see Entering the instant

messaging menu on page 60.

• To connect to the service (online), see Connecting to and disconnect from the

instant messaging service on page 61.

• To start a conversation with a contact, see IM contacts in Starting an instant

messaging conversation on page 61.

To create your own contact lists, see Contacts for instant messaging on page

64.

• To join a public group, see Groups in Starting an instant messaging

conversation on page 61.

To join an instant messaging group via an invitation message, see Accepting or

rejecting an invitation on page 62.

To create your own group, or to join or delete a public group, see Groups on

page 64.

• To edit your own information, see Editing your own settings on page 63.

• To search users and groups, see Search in Starting an instant messaging

conversation on page 61.

• To read a message, see Reading an instant message on page 62.

• To write and send messages during an active session, see Participating in a

conversation on page 63.

• To view, rename or delete saved conversations, select Saved convers. when you

have entered the Instant messages menu.

• To block or unblock contacts, see Blocking and unblocking messages on page

64.

• To disconnect from the service, see Connecting to and disconnect from the

instant messaging service on page 61.

Entering the instant messaging menu

To enter the Instant messages menu while still offline, press Menu, and select

Messages and Instant messages. Activate a service and select Login to connect to

the service; Saved convers. to view, erase or rename the conversations that you

have saved during a session, or Connect. settings to access the settings needed for

a connection.

Connecting to and disconnect from the instant messaging service

To connect to the service, enter the Instant messages menu, activate a service and

select Login. Select one of the available sets. If necessary key in the User ID: and

the Password:. When the phone has successfully connected, Logged in is displayed.

Tip: To set the phone to automatically connect to the instant messaging

service when you enter the Instant messages menu, connect to the service,

select My settings, Automatic login and On IM start-up.

To disconnect from the service, select Logout.

Starting an instant messaging conversation

Enter the Instant messages menu and connect to a service. You can select:

•

Conversations to view the list of new and read messages or invitations to

instant messaging during the active session. Scroll to the message or invitation

that you want and press Open to read the message.

indicates new and

indicates invitations.

read instant messages.

read group messages.

•

IM contacts includes the contacts that you have added. Scroll to the contact to

whom you would like to send instant messages and press Chat or press Open if

a new message is shown in the list.

If you have received a new message from a contact, it is indicated with

indicates the online and

the offline contacts in the phone’s contacts

memory. indicates a blocked contact, see Blocking and unblocking

messages on page 64.

•

Groups and Public groups. The list of bookmarks to public groups provided by

the service provider is displayed. To start a conversation, scroll to a group and

press Join. Enter the screen name that you want to use in the conversation.

When you have successfully joined in the group conversation, the phone shows

Joined group: and the group name. To create a private group, see Groups on

page 64.

Search and select Users or Groups to search for other users or public groups on

the network. To start the session when you have found the user or the group

that you want, press Options and select Chat or Join group.

To start a session from Contacts, see Viewing the subscribed names on page 82.

Accepting or rejecting an invitation

When you have connected to the service and you receive a new invitation, New

invitation received is displayed. Press Read to read it. If more than one invitation is

received, the number of messages followed by new invitations received is

displayed. Press Read, scroll to an invitation that you want and press Open. Press

Accept, to join the private group conversation, or press Options and select Reject

or Delete to reject or delete the invitation.

Reading an instant message

When you have connected to the service and you receive a message from a person

who is not taking part in the conversation, New instant message is displayed.

Press Read to read it. If more than one message is received, the number of

messages followed by new instant messages is displayed. Press Read, scroll to a

message and press Open.

New messages received during an active session are held in the Conversations of

the Instant messages menu. If the message is from a person whose contact

information is missing from the contact list in IM contacts, the sender’s ID is

shown. If the contact information can be found in the phone’s memory for

contacts and the phone recognises it, the sender’s name is shown. To save a new

contact in the phone’s memory, press Options and select Save to contacts and

enter the name of the person, or Add to contact.

Participating in a conversation

Join or start a session by pressing Write. Write your message and press Send or

to send it. If you press Options, some of the following options are available:

View conversation, Save to contacts, Add to contact, Group members, End

conversation, Dictionary.

Editing your own settings

Enter the Instant messages menu and connect to the service. Select My settings to

view and edit your own availability information or screen name. Select Availability

and Available for all or Avail. for contacts (or Appear offline) to allow all the other

users or only the contacts on your contact list to see that you are online when you

have connected to the service. When you are connected to the service,

indicates that you are online and

that you are not visible to others.

Contacts for instant messaging

To add contacts to the instant messaging contacts list, connect to the service and

select IM contacts. If the contacts list is empty the phone displays Contact list

empty. Copy contacts from server? to retrieve available contacts from the server.

Otherwise press Options and select Add contact, or if you have no contacts added,

press Add. Select Enter ID manually, Search from serv., From contacts, or Copy

from server to add a new contact. When the contact is added, the phone displays

Added to IM contacts: and the contact name.

Scroll to a contact, and press Chat to start a session or press Options and select

Contact info, Edit name, Block contact (or Unblock contact), Add contact, Remove

contact, Copy to server, or Availability alerts.

Blocking and unblocking messages

Connect to the service and select Conversations or IM contacts. Highlight the

contact in the contacts list from whom you want to block incoming messages.

Press Options, select Block contact and press OK.

To unblock the messages, connect to the service and select Blocked list. Scroll to

the contact from whom you want to unblock the messages and press Unblock.

Groups

You can create your own private groups for a session, or use the public groups

provided by the service provider. The private groups exist only during an active

session. You can add to a private group only the contacts that are in your contact

list and thus in the phone’s contacts memory. If the server you are logged onto

does not support group services all group-related menus are dimmed.

Public groups

You can bookmark public groups that your service provider may maintain.

Connect to the service, select Groups and Public groups. Scroll to a group that you

want to chat with and press Join. If you are not in the group, key in your screen

name as your nickname for the group. If you press Options, you can select Delete

group to delete a group from your group list.

Creating a private group

Connect to the service, select Groups and Create group. Key in the name for the

group and the screen name that you want to use for the group. You can use

another screen name in another group. Mark your private group members from

the contacts list and key in an invitation to newly added members.

Instant messaging settings

You may receive the settings as a configuration message from the service

provider. See Configuration settings service on page 19. To key in the settings

manually, see Configuration settings on page 98. For instant messaging and

presence settings, contact your service provider.

To enter the Instant messages menu while still offline, press Menu, and select

Messages and Instant messages. Activate a service and select Connect. settings.

Select Configuration and select the set you would like to activate. Select Account

and choose the account you want to use. Select User ID to view or to edit the user

ID. Select Password to enter the password.

E-mail application

The e-mail application allows you to access the compatible e-mail account that

you use in the office or at home, via the phone (network service). You can write,

send, and read e-mail with your phone. Your phone supports POP3 and IMAP4 e-

mail servers.

The e-mail application uses shared memory, see Shared memory on page 15.

Before you can send and retrieve any e-mail, you may need to do the following:

• Obtain a new e-mail account or use the current one. For availability of your e-

mail account contact your e-mail service provider.

• For the settings required for the e-mail application, contact your e-mail

service provider. To receive the e-mail settings as a configuration message, see

Configuration settings service on page 19.

• To set the e-mail settings on your phone, press Menu and select Messages,

Message settings and E-mail messages. See Settings for e-mail application on

page 71.

Writing and sending an e-mail

1. Press Menu and select Messages, E-mail, and Create e-mail.

2. Key in the recipient’s e-mail address, a subject and the e-mail message.

3. Press Send and select Send now.

Downloading e-mail from your e-mail account

1. Press Menu and select Messages, E-mail and Retrieve to download e-mail that

have been sent to your e-mail account. Or:

Press Menu and select Messages and E-mail, press Options and select Retrieve

and send to download new e-mail and to send e-mail that have been saved in

the Outbox folder.

2. Your phone attempts to make a connection to the e-mail service. A status bar

is shown while your phone is downloading e-mail to your phone.

3. Press Select to view the new message in the Inbox, or press Back to view it

later. An unread text message is indicated by

Reading and replying to an e-mail

Press Menu, select Messages, E-mail and Inbox. While reading the message, press

Options to see the options available for this message.

To reply to an e-mail, press Replyand select Original text or Empty screen. Confirm

or edit the e-mail address and subject, then write your reply. To send the message,

press Send and select Send now.

Inbox and Other folders (Drafts, Archive, Outbox and Sent items)

Your phone saves e-mail that you have downloaded from your e-mail account in

the Inbox folder. Other folders contains the folders: Drafts for saving unfinished e-

mail, Archive for organising and saving your e-mail, Outbox for saving e-mail that

have not been sent, and Sent items for saving e-mail that have been sent.

Deleting e-mail

To delete e-mail, press Menu and select Messages and E-mail, press Options and

selectDelete messages. To delete all messages from a folder, select the folder from

which you want to delete the messages and press Yes. To delete all messages from

all folders, select All messages and press Yes. Note that deleting an e-mail from

your phone does not delete it from the e-mail server.

Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

more information and for the voice mailbox number, contact your service

provider.

Press Menu, and select Messages and Voice messages. To call your voice mailbox,

select Listen to voice messages. To key in, search for or edit your voice mailbox

number, select Voice mailbox number.

If supported by the network, the indicator

will show new voice messages.

Press Listen to call your voice mailbox number.

Tip: Pressing and holding

calls your voice mailbox if you have the

number set.

Info messages

With the info message network service you may be able to receive messages on

various topics. For details, contact your service provider.

Service commands

Press Menu, and select Messages and Service commands. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

Deleting all messages from a folder

To delete all messages from a folder, press Menu, and select Messages and Delete

messages. Select the folder from which you want to delete the messages and press

OK to confirm the query.

If the folder contains unread messages, the phone will ask whether you want to

delete them also.

Message settings

The message settings affect the sending, receiving and viewing of messages.

Settings for text and SMS e-mail messages

Press Menu, and select Messages, Message settings, Text messages. Select

Sending profile. If more than one message profile set is supported by your SIM

card, select the set that you want to change. Each setting has the following

settings: Message centre number (delivered by your service provider), Messages

sent via, Message validity, Default recipient number (text messages) or E-mail

server (e-mail), Delivery reports, Use GPRS, Reply via same centre (network service)

and Rename sending profile.

Select Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

Settings for multimedia messages

If Allow multimedia reception is set to Yes or In home network, your operator or

service provider may charge you for every message you receive. The default setting

to receive multimedia messages is generally on.

Press Menu, and select Messages, Message settings and Multimedia msgs.. Select

•

Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

•

Delivery reports to ask the network to send delivery reports about your

messages (network service).

Scale image down to define the image size when you insert the image into the

multimedia message.

Default slide timing to define the default time for slides in multimedia

messages.

Allow multimedia reception. Choose No, Yes or In home network to use the

multimedia service. If Allow multimedia reception is set to Yes or In home

network, your operator or service provider may charge you for every message

you receive. The default setting to receive multimedia messages is generally

on.

•

Incoming multimedia messages. Select Retrieve to automatically allow the

reception of multimedia messages, Retrieve manually to allow the reception of

multimedia message only after being prompted or Reject to prevent the

reception of multimedia messages.

•

Configuration settings. Select Configuration and select the default service

provider for retrieving multimedia messages. Select Account to see the

accounts provided by the service provider. If more than one account is

displayed choose the one that you want to use. You may receive the settings as

a configuration message from the service provider. See Configuration settings

service on page 19. To key in the settings manually see Configuration settings

on page 98.

Allow adverts to choose if you allow the reception of messages defined as

advertisements. This setting is not shown if Allow multimedia reception is set

to No.

Settings for e-mail application

You may receive the e-mail application settings as a configuration message from

the service provider. See Configuration settings service on page 19. To key in the

settings manually see Configuration settings on page 98.

Select each of the settings individually and key in all the required settings.

Contact your e-mail service provider for the settings.

Press Menu and select Messages, Message settings, and E-mail messages. Select

•

Configuration and select the set that you would like to activate.

Account to see the accounts provided by the service provider. If more than one

account is displayed choose the one that you want to use.

•

My name. Key in your name or nickname.

E-mail address. Key in e-mail address.

•

Include signature. You can define a signature that is automatically added to

the end of your e-mail, when you write your message.

Reply-to address. Key in the e-mail address to which you want the replies to be

sent.

•

SMTP user name. Key in the name that you want to use for outgoing mails.

SMTP password. Key in the password that you want to use for outgoing mails.

Display terminal window. Select Yes to perform manual user authentication for

Intranet connections.

•

Incoming server type. Select either POP3 or IMAP4 depending on the type of e-

mail system that you are using. If both types are supported, select IMAP4.

Incoming mail settings

If you have selected POP3 as the incoming server type, the following options

are shown: Retrieve e-mails, POP3 user name, POP3 password and Display

terminal window.

If you have selected IMAP4 as the incoming server type, the following options

are shown: Retrieve e-mails, Retrieval method, IMAP4 user name, IMAP4

password and Display terminal window.

Common settings

Press Menu and select Messages, Message settings, Other settings and Font size

to select the font size for reading and writing messages.

Message counter

To view how many messages you have sent and received, press Menu and select

Messages, Message counter. Select Sent messages or Received messages or select

Clear counters to clear the counters.

■ Call register

The phone registers the phone numbers of missed, received and

dialled calls, push to talk addresses of one-to-one push to talk

calls and the approximate length of your calls.

The phone registers these items only if the network supports these functions, and

the phone is switched on and within the network service area.

When you press Options in the Missed calls, Received calls and Dialled numbers

menus, you can view the date and the time of the call, edit or delete the phone

number from the list, save the number in Contacts, or send a message to the

number. Select Delete recent call lists to delete the recent calls lists.

Recent calls lists

Press Menu, and select Call register and then select

•

Missed calls to view the list of up to 20 phone numbers from which somebody

has tried to call you (network service). The number in front of the (name or)

phone number indicates the amount of call attempts from that caller.

Tip: When a note about missed calls is displayed, press List to access

the list of phone numbers. Scroll to the number that you would like to

call back and press

•

Received calls to view the list of up to 20 phone numbers from which you have

most recently accepted or rejected calls (network service).

Dialled numbers to view the list of up to 20 phone numbers that you have most

recently called or attempted to call.

Tip: In standby mode, press

numbers. Scroll to the number or name that you want, and press

call the number.

once to access the list of dialled

•

Delete recent call lists to delete the recent calls lists. Select whether you want

to delete all the phone numbers in the recent calls lists, or only those numbers

in the missed calls, received calls or dialled numbers lists. You cannot undo this

operation.

Counters and timers for calls, data and messages

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding off for billing, taxes and so forth.

Some timers may be reset during service or software upgrades.

Press Menu, and select Call register and then select Call duration, GPRS

data counter or GPRS connection timer for approximate information on your

recent communications.

Positioning information

Some networks allow position requests (network service). Positioning allows you

to view the received position requests from the network operator. Contact your

network operator or service provider to subscribe to and agree upon the delivery

of location information.

Press Menu, and select Call register, Positioning and then Position log to see a list

of received position requests.

■ Contacts

You can save names and phone numbers (Contacts) in the

phone’s memory and in the SIM card’s memory.

• The phone’s memory may save names with numbers and

text notes about each name. You can also save an image for a certain number

of names. Contacts use shared memory, see Shared memory on page 15.

• Names and numbers saved in the SIM card’s memory, are indicated by

In dynamic contacts you can publish your current availability status to

communicate to anyone who has access to this service and who is requesting this

information. See My presence on page 79.

Selecting settings for contacts

Press Menu and select Contacts and Settings. Select

•

Memory in use to select the SIM card or phone memory to use for your

contacts. To recall names and numbers from both memories for contacts,

select Phone and SIM. In that case, the names and numbers will be saved in the

phone memory.

•

Contacts view to select how the names, numbers and images in contacts are

displayed.

Memory status to view how much memory is available in the selected memory

for contacts.

Saving names and phone numbers (Add contact)

Press Menu and select Contacts and Add new contact. Key in the name and the

phone number. When the name and number are saved, press Done.

Tip: Quick save In standby mode, key in the phone number and press Save.

Key in the name, press OK and Done.

Saving multiple numbers or items per name

You can save different types of phone numbers and short text items per name in

the phone’s internal memory for contacts.

The first number saved is automatically set as the default number and it is

indicated with a frame around the number type indicator, for example

. When

you select a name from contacts, for example to make a call, the default number is

used unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM.

2. Scroll to the name saved in the phone’s internal memory for the contact to

which you want to add a new number or text item, and press Details.

3. Press Options and select Add number, Add detail or Add image.

4. To add a number or detail, select one of the number types or text types,

respectively, or select an image from Gallery.

If you select the text type User ID: select Search to search for an ID by a mobile

phone number or an e-mail address in the server of the operator or service

provider if you have connected to the presence service. See My presence on

page 79. If only one ID is found, it is automatically saved. Otherwise, to save

the ID, press Options, and select Save. To key in the ID, select Enter ID

manually. Key in the ID and press OK to save it.

To change the number or text type, select Change type in the options list. Note

that you cannot change the type of an ID when it is on the IM contacts or in

the Subscribed names list.

To set the selected number as the default number, select Set as default.

5. Key in the number or text item and press OK to save it.

6. Press Back and then Exit to return to standby mode.

Adding an image to a name or number in contacts

You can add an image in supported format to a name or number saved in the

phone’s internal memory.

Move the joystick down in standby mode, scroll to the contact that you want to

add an image to and press Details. Press Options and select Add image. The phone

opens the list of folders in the Gallery. Scroll to the desired image, press Options

and select Save to contacts. A copy of the image is added to the contact.

Searching for a contact

Press Menu and select Contacts and Search, or to quickly find a contact name,

move the joystick down in standby mode. You can key in the first characters of the

name you are searching for in the pop-up window.

In addition the following options in the Contacts menu may also be available:

•

Add new contact and Delete.

Copy to copy names and phone numbers from the phone´s contact directory to

the SIM card´s memory, or vice versa.

•

Settings to select how the names and numbers in contacts are displayed.

Select Memory status to view the free and used memory capacity.

Speed dials to assign a number to a speed dialling key. To activate speed

dialling see Call settings on page 92.

Service numbers to call the service numbers of your service provider if the

numbers are included on your SIM card (network service).

My numbers to view the phone numbers assigned to your SIM card. Only

shown, if the numbers are included on your SIM card.

Caller groups to arrange the names and phone numbers saved in the memory

into caller groups with different ringing tone.

Editing or deleting details

Search for the contact that you want to edit or delete and press Details. Scroll to

the name, number, text item or image that you want to edit or delete and press

Options.

• To edit a name, number or text item or to change image, select Edit name, Edit

number, Edit detail or Change image.

Note that you cannot edit or delete an ID when it is in IM contacts or in the

Subscribed names list.

• To delete a number or text item, select Delete number or Delete detail.

• To delete an image attached to the contact, select Delete image. Deleting an

image from contacts does not delete it from Gallery.

My presence

With the presence service (network service) you can share your presence status

with other users, for example your family, friends and colleagues with compatible

devices and access to the service. Presence status includes your availability, status

message and personal logo. Other users who have access to the service and who

are requesting your information are able to see your status. The requested

information is shown in Subscribed names in the viewer’s Contacts menu. You can

personalise the information that you want to share with others and control who

can see your status.

Before you can use presence, you need to subscribe to the service. To check the

availability, for charging details and to subscribe to the service, contact your

service provider, from whom you also receive your unique ID and password and

the settings for the service. To set the required settings for the presence service,

see Instant messaging settings on page 65. While you have connected to the

presence service, you can use the other functions of the phone, and the presence

service is active in the background.

Press Menu and select Contacts and My presence. Select

•

Connect to 'My presence' service (or Disconnect).

My current presence to change your presence status. Select

•

View current presence and select Private pres. or Public pres..

My availability to set your availability status to Available indicated by

or to Busy indicated by , or to Not available indicated by

•

My presence message and key in the text to be shown to other persons or

press Options and select Previous msgs. and select an old message as the

status message.

•

My presence logo to select your personal logo from the Graphics folder in

the gallery. If you select the Default, the logo is not published.

Show to to select the groups to whom you want to show your presence

status or if not to show it at all.

Select Private and public and contacts in your private list are able to see all

your presence information: availability, status message and logo. Other

contacts can see only your availability.

Select Private viewers and the contacts in your private list can see all your

presence information (availability, status message and logo). Other users

will not see any information.

If you select No one, no one can see your presence information.

•

Viewers and select

•

Current viewers to view all the persons who have subscribed to your

presence information.

•

Private list is a list of the persons who are allowed to view all your presence

information, including availability, status message and logo. You can

manage your own private list. Other persons who are not in the private list,

can see only your availability.

•

Blocked list to view all the persons you have blocked from viewing your

presence information.

•

Settings and select

•

Show current presence in idle to show the current status indicator in

standby mode.

•

Synchronise with profiles to select whether you want to update your My

presence message and My availability manually or automatically by linking

them to the currently active profile. See also Profiles on page 88. Note that

you cannot link a personalised status logo to a Profile.

•

Connection type to select if the phone connects automatically to the

service when the phone is switched on.

IM and my presence settings, see Instant messaging settings on page 65.

Subscribed names

You can create a list of contacts whose presence status information you want to

be aware of. You can view the information if the contacts allow you to view it and

if it is not prevented by the contact or network. You can view these subscribed

names either by scrolling through the contacts or via the Subscribed names menu.

Ensure that the memory in use is either Phone or Phone and SIM.

To connect to the Presence service, press Menu and select Contacts, My presence

and Connect to 'My presence' service.

Adding contacts to the subscribed names

1. Press Menu and select Contacts and Subscribed names. If you have not

connected to the Presence service, the phone asks if you want to connect now.

2. If you have no contacts on your list, press Add. Otherwise, press Options and

select Subscribe new. The list of your contacts is shown.

3. Select a contact from the list and if the contact has an user ID saved, the

contact is added to the subscribed names list. If there is more than one ID,

select one of them. After subscription of the contact, Subscription activated is

shown.

Viewing the subscribed names

See also Searching for a contact on page 78 to view the presence information.

1. Press Menu and select Contacts and Subscribed names.

The status information of the first contact on the subscribed names list is

displayed. The information that the person wants to give to others may include

text and some of the following icons:

or indicate that the person is either available, discreet or not

available.

indicates that the person’s presence information is not available.

2. Press Details to view the details of the selected contact, or press Options and

select

•

Subscribe new to add a new contact to the list of subscribed names.

Chat to start a conversation.

Send message to send a text message to the selected contact.

Send SMS e-mail to send an e-mail to the selected contact.

Send bus. card to send a business card to the selected contact.

Unsubscribe to remove the selected contact from the list of subscribed

names.

Unsubscribing a contact

• To unsubscribe a contact from the Contacts list, move the joystick down in

standby mode and scroll to the contact that you want to unsubscribe. Press

Details and Details again, select the ID and press Options. To unsubscribe,

select Unsubscribe and press Yes to confirm.

• To unsubscribe via the Subscribed names menu, see Viewing the subscribed

names on page 82.

Copying contacts

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa. Note that any text items saved in the phone’s

internal memory, such as e-mail addresses, will not be copied to the SIM card.

Press Menu and select Contacts and Copy. Select the copying direction, From

phone to SIM card or From SIM card to phone.

If you select One by one, scroll to the name that you want to copy and press Copy.

Default numbers is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied.

To choose whether you want to keep or delete the original names and numbers,

select Keep original or Move original.

If you select All or Default numbers, press Yes when Copy contacts? or Move

contacts? is displayed.

Sending and receiving a business card

You can send and receive a person’s contact information from a compatible device

as a business card. When you have received a (MMS) business card, press Show

(Play) and Save to save the business card in the phone’s memory. To discard the

business card, press Exit and then Yes.

To send a business card, search for the name and phone number you want to send

from contacts, press Details and Options and select Send bus. card. Select Via

infrared, Via text message (network service) or Via multimedia (network service).

Speed dials

To assign a number to a speed-dialling key, press Menu and select Contacts and

Speed dials and scroll to the speed-dialling key number that you want.

Press Assign, or if a number has already been assigned to the key, press Options

and select Change. Press Search, and select first the name and then the number

that you want to assign. If the Speed dialling function is off, the phone asks

whether you want to activate it. See also Speed dialling in Call settings on page

92.

To make a call using the speed-dialling keys, see Speed dialling a phone number

on page 34.

Voice dialling

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken word(s), such as a person’s name(s), can be a voice tag. You

can add up to ten voice tags.

Before using voice tags, note that:

•

Voice tags are not language-dependent. They are dependent on the speaker's voice.

You must say the name exactly as you said it when you recorded it.

Voice tags are sensitive to background noise. Record voice tags and use them in a quiet

environment.

•

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialling in all circumstances.

Adding and managing voice tags

Save or copy in the phone’s memory the contacts to which you want to add a

voice tag. You can also add voice tags to the names in the SIM card, but if you

replace your SIM card with a new one, you first need to delete the old voice tags

before you can add new ones.

Voice tags use shared memory, see Shared memory on page 15.

1. In standby mode, move the joystick down.

2. Scroll to the contact to which you want to add a voice tag and press Details.

Scroll to the phone number you want and press Options.

3. Select Add voice tag.

4. Press Start, and say clearly the word(s) you want to record as a voice tag. After

recording, the phone plays the recorded tag. A symbol

appears after the

phone number with a voice tag.

To check the voice tags, press Menu and select Contacts and Voice tags. Scroll to

the contact with the voice tag that you want, and press Select to see the options

to listen to, delete or change the recorded voice tag.

Making a call by using a voice tag

In standby mode, press and hold the right selection key. A short tone is heard and

Speak now is displayed. Say the voice tag clearly. The phone plays the recognised

voice tag and then dials the phone number of the voice tag after 1.5 seconds.

Service numbers

Your service provider may have included service numbers in your SIM card. These

menus are only shown if supported by your SIM card.

My numbers

The phone numbers assigned to your SIM card are saved in My numbers if this is

allowed by the card. To view the numbers, press Menuand select Contacts and My

numbers. Scroll to the desired name or number, and press View.

Caller groups

You can arrange the names and phone numbers saved in Contacts into caller

groups. For each caller group, you can set the phone to sound a specific ringing

tone and show a selected graphic on the display when the phone recognises a call

from a phone number in the group. To set the phone to ring only upon calls from

phone numbers belonging to a selected caller group, see Alert for in Tone settings

on page 89.

Press Menu and select Contacts and Caller groups and select the desired caller

group. Select:

•

Group name, key in a new name for the caller group and press OK.

Group ringing tone and select the ringing tone for the group.

Group logo and select On to set the phone to display the group logo, Off not to

display it, or View to view the logo.

•

Group members to add a name to the caller group, press Add. Scroll to the

name you want to add to the group and press Add. To remove a name from a

caller group, scroll to the name that you want to remove, and press Options

and select Remove contact.

■ Settings

Profiles

Your phone has various setting groups, profiles, for which you

can customise the phone tones for different events and environments. Personalise

the profiles to your own liking and activate a profile to use it. Available profiles are

General, Silent, Meeting, Outdoor, My style 1, and My style 2.

Press Menu, and select Settings and Profiles. Scroll to a profile and press Select.

• To activate the selected profile, select Activate.

• To personalise the profile, select Personalise. Select the setting you want to

change and make the changes.

• To set the profile to be active until a certain time up to 24 hours, select Timed

and set the time for the profile setting to end. When the time set for the profile

expires, the previous profile that was not timed becomes active.

Tip: To change the profile quickly in standby mode, press the power key

, scroll to the profile that you want to activate and press Select.

Themes

A theme is a package that may include a screen saver, a wallpaper image, a ringing

tone and a colour scheme to customise your phone for different events and

environments. Themes are stored in Gallery.

Press Menu, and select Settings and Themes. To activate a theme, select Select

theme to view the Themes folder in Gallery. Open the folder and scroll to a theme.

Press Options and select Apply theme. See also Gallery on page 101. To download

new themes, select Theme downloads. See Downloading on page 134.

Tone settings

You can change the settings of the selected active profile.

Press Menu, and select Settings and Tone settings. Select and change Incoming

call alert, Ringing tone, Ringing volume, Vibrating alert, Message alert tone,

Instant message alert tone, Keypad tones and Warning tones. You can find the

same settings in the Profiles menu, see Profiles on page 88.

Select Alert for to set the phone to ring only upon calls from phone numbers that

belong to a selected caller group. Scroll to the caller group you want to select or

choose All calls and press Mark.

Personal shortcuts

With personal shortcuts you get quick access to frequently used phone functions.

Right selection key

Press Menu, and select Settings, Personal shortcuts and Right selection key to

allocate one phone function from a predefined list to the right selection key. See

also Standby mode on page 28. This menu is not shown in some operator variants.

Go to options

You can allocate phone functions from a predefined list to the left selection key.

Press Menu, and select Settings and Personal shortcuts. Select Select 'Go to'

options to choose the functions that you want to appear in the shortcut list.

Select Organise 'Go to' options to rearrange the functions on your personal

shortcut list. See also Standby mode on page 28.

Voice commands

You can have phone functions which can be activated by saying a voice tag. Up to

five functions can be selected for voice tag.

Press Menu, and select Settings, Personal shortcuts and Voice commands. Select

the function folder that you want, scroll to the function to which you want to add

a voice tag and press Add. A voice tag is indicated with

To add a voice command, refer to the instructions in section Adding and managing

voice tags on page 86.

To activate a voice command, refer to the instructions in section Making a call by

using a voice tag on page 86.

Among the functions you can activate by Voice commands are Audible alerts to

check the battery status or the network status via acoustic signals (beeps):

one beep → low

two beeps → rather low

three beeps → rather strong

four beeps → strong

different tone → no network coverage

Display settings

Press Menu, and select Settings and Display settings.

• Select Wallpaper to set your phone to display a background image, known as

wallpaper, when the phone is in standby mode.

• Select Colour schemes to change the colour in some display components, for

example indicators and signal and battery bars, and the background image

that appears when using a menu function.

• Select Menu view to set the way the phone displays the main menu.

• Select Operator logo to set your phone to display or hide the operator logo.

• Select Screen saver and Select s. saver to choose an animation or a still image

as screen saver from Gallery. Select in Time-out the time after which the

screen saver will be activated. Select On to activate the screen saver.

Independent of the screen saver settings, for power saving purposes, a digital

clock view will be activated when no function of the phone has been used for a

certain time. See Power saving on page 30.

Time and date settings

Press Menu, and select Settings and Time and date settings.

Select Clock to set the phone to show the clock in standby mode, adjust the clock

and select the time zone and the time format.

Select Date to set the phone to show the date in standby mode, set the date, and

select the date format and date separator.

Select Auto-update of date & time (network service) to set the phone to

automatically update the time and date according to the current time zone.

Call settings

Press Menu, and select Settings and Call settings. Select

•

Automatic volume control and the phone will automatically adjust the speaker

volume according to the background noise.

Call divert (network service) to divert your incoming calls. For details, contact

your service provider.

Anykey answer and On and you can answer an incoming call by briefly pressing

any key, except

, selection keys

and

, the PTT key and

Automatic redial and On and your phone will make a maximum of ten attempts

to connect the call after an unsuccessful call attempt.

Speed dialling and On and the names and phone numbers assigned to the

speed-dialling keys, from

, can be dialled by pressing and holding

the corresponding number key.

•

Call waiting and Activate and the network will notify you of an incoming call

while you have a call in progress (network service). See Call waiting on page

34.

Summary after call and On and the phone will briefly display the approximate

duration and cost (network service) of the call after each call.

•

Send my caller ID (network service) and select Yes or Set by network.

Line for outgoing calls (network service) to select phone line 1 or 2 for making

calls. This option is only shown if supported by your SIM card.

Phone settings

Press Menu, and select Settings, Phone settings. Select

•

Phone language to set the display language of your phone. If you select

Automatic the phone selects the language according to the information on the

SIM card.

•

Memory status to view how much memory is available in the phone’s memory.

Automatic keyguard to set the keypad of your phone to lock automatically

after a pre-set time delay when the phone is in standby mode and no function

of the phone has been used. Select On and you can set the time from 5 seconds

to 60 minutes.

When the keyguard is on, calls still may be possible to the official emergency

number.

•

Cell info display and On to receive information from the network depending on

the network cell used (network service).

•

Welcome note and key in the note you would like to be shown briefly when the

phone is switched on. To save the note, press Save.

Operator selection and Automatic and the phone automatically selects one of

the cellular networks available in your area. With Manual, you can select a

network that has a roaming agreement with your home network operator.

•

Confirm SIM service actions. See SIM services on page 139.

Help text activation to set the phone to show or hide the help texts.

Start-up tone to set the phone to play or not to play a start-up tone when the

phone is switched on.

Connectivity

You can connect the phone to a compatible device via infrared and you can also

define the settings for (E)GPRS dial-up connections.

Infrared

You can set up the phone to receive data through its infrared (IR) port. To use an IR

connection, the device with which you want to establish a connection must be

IrDA compliant. You can send or receive data such as business cards, graphics,

images, sound clips, videos and calendar notes to or from a compatible phone or

data device (for example, a computer) via the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 Laser product.

Sending and receiving data via IR

1. Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices.

2. To activate the IR port of your phone to receive data via IR, press Menu, and

select Settings, Connectivity and Infrared.

3. The user of the sending phone selects the desired IR function to start data

transfer.

If data transfer is not started within two minutes after the activation of the IR

port, the connection is cancelled and has to be started again.

IR connection indicator

• When

phone is ready to send or receive data via its IR port.

• When blinks, your phone is trying to connect to the other device or a

connection has been lost.

is shown continuously, the IR connection is activated and your

(E)GPRS

General Packet Radio Service (GPRS) is a network service that allows mobile

phones to be used for sending and receiving data over an Internet Protocol (IP)-

based network. GPRS is a data bearer that enables wireless access to data

networks such as the Internet.

EGPRS (Enhanced GPRS), also known as EDGE (Enhanced Data Rates for Global

Evolution), is similar to GPRS. EDGE is a radio interface modulation technique

which increases GRPS data rates. For more information on the availability of

EGPRS and data transfer speed, contact your network operator or service provider.

The applications that may use (E)GPRS are MMS, Instant messaging, browsing

sessions, e-mail, remote SyncML, Java application downloading, push to talk and

the PC dial-up (for example, Internet and e-mail).

Before you can use (E)GPRS technology, contact your network operator or service

provider for availability of and subscription to the (E)GPRS service and save the

(E)GPRS settings for each of the applications used over (E)GPRS. For information

on pricing, contact your network operator or service provider.

Note that when you have selected GPRS as a data bearer, the phone uses EGPRS

instead of GPRS if this is available in the network. You cannot select between

EGPRS and GPRS but for some applications you may be able to select either GPRS

or GSM data (CSD, circuit switched data).

(E)GPRS connection

Press Menu, and select Settings, Connectivity, GPRS and GPRS connection.

• Select Always online to set the phone to automatically register to an (E)GPRS

network when you switch the phone on.

• Select When needed and the (E)GPRS registration and connection are

established when an application using (E)GPRS needs it and closed when you

end the application.

(E)GPRS modem settings

You can connect the phone via infrared or a data cable connection to a

compatible PC and use the phone as a modem to enable (E)GPRS connectivity

from the PC.

To define the settings for (E)GPRS connections from your PC, press Menu, and

select Settings, Connectivity, GPRS and GPRS modem settings.

• Select Active access point and activate the access point that you want to use.

• Select Edit active access point to change the access point settings.

• Select Alias for access point. Key in the name that you would like for the

activated access point and press OK.

• Select GPRS access point. Key in the access point name (APN) to establish a

connection to an (E)GPRS network and press OK. Contact your network

operator or service provider for the APN.

You can also set the (E)GPRS dial-up service settings (access point name) on your

PC using the Nokia Modem Options software, see PC Suite on page 140. If you

have set the settings both on your PC and on your phone, note that the PC’s

settings will be used.

Enhancement settings

The enhancement settings menu is shown only if the phone is or has been

connected to a compatible mobile enhancement, such as chargers and handsfree

units.

Press Menu, and select Settings and Enhancement settings. You can select an

enhancement menu if the corresponding enhancement is or has been connected

to the phone. Depending on the enhancement, you can select some of the

following options:

•

Default profile to select the profile that you want to be automatically

activated when you connect to the selected enhancement. You can select

another profile while the enhancement is connected.

Automatic answer to set the phone to answer an incoming call automatically

after 5 seconds. If the Incoming call alert is set to Beep once or Off, automatic

answer will not be in use.

Lights to set the lights permanently On. Select Automatic to set the lights on

for 15 seconds after a keypress.

• When the phone is connected to the full car kit, select Ignition detector and On

to automatically switch off the phone approximately 20 seconds after you

have switched off the car’s ignition.

Configuration settings

Some of the network services need to have the correct configuration settings on

your phone. Get the settings from your SIM-card, a service provider as a

configuration message or key in your personal settings manually. Configuration

settings from up to ten different service providers can be stored in the phone and

can be managed within this menu.

To save the configuration settings received by a configuration message sent by a

service provider, see Configuration settings service on page 19.

Press Menu, and select Settings, Configuration settings. Select

•

Default configuration settings to view the list of service providers stored on the

phone (the default service provider is highlighted) and to select another service

provider as default. Scroll to a provider and press Details to view the list with

supported applications. To delete a service provider from the list, press Options

and select Delete.

•

Activate default in all applications to set the applications to use the settings

from the default service provider.

Preferred access point to select another access point. Normally the access

point from your preferred network operator is to be used.

Keying in the settings manually

To enter, view and edit the settings manually, press Menu, and select Settings,

Configuration settings and Personal configuration settings.

To add a new configuration, press Add new or press Options and select Add new.

Choose one of the application types from the list and key in all the necessary

settings. To activate the settings, press Back and Options and select Activate.

To view or to edit the user-defined settings select the application that you want to

view and select the setting to edit.

Security settings

When calls are restricted, calls still may be possible to the official emergency number

programmed into your device.

Press Menu, and select Settings and Security settings. Select

•

PIN code request to set the phone to request your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Fixed dialling to restrict your outgoing calls to selected phone numbers if this

function is supported by your SIM card.

Closed user group (network service) to specify the group of people whom you

can call and who can call you.

Security level. Select Phone and the phone will request the security code

whenever a new SIM card is inserted into the phone.

Select Memory and the phone will request the security code when the SIM

card’s memory is selected and you want to change the memory in use.

•

Access codes to change the security code, PIN code, PIN2 code or barring

password.

Code in use to specify whether the UPIN or PIN code should be active.

Restore factory settings

To reset some of the menu settings to their original values, press Menu, and select

Settings and Restore factory settings.

100

■ Operator menu

This menu lets you access a portal to services provided by your network operator.

This menu is operator specific. The name and the icon depend on the operator. For

more information, contact your network operator.

The operator can update this menu with a service message. For more information,

see Service inbox on page 134.

■ Gallery

In this menu, you can manage graphics, images, video clips,

recordings and tones. These files are arranged in folders.

Your phone supports a digital rights management (DRM) system to protect

acquired content. A piece of content, for example a ringing tone, can be protected

and associated with certain usage rules, for example number of usage times and a

certain usage period. The rules are defined in the content’s activation key which

can be delivered either together with the content or independently depending on

the service provider. You may be able to update these activation keys. Always

check the delivery terms of any content and activation key before acquiring them,

as they may be subject to a fee.

being copied, modified, transferred or forwarded.

1. Press Menu and select Gallery. A list of folders is shown. Images, Video clips,

Themes, Graphics, Tones and Recordings are the original folders on the phone.

101

2. Scroll to the desired folder and press Open to view a list of files in the folder or

press Options and one of the options may be available:

Delete folder, Move, Rename folder, Downloads, Details, Type of view, Sort, Add

folder, Memory status and Activation key list.

3. If you have opened a folder, select the file that you want to view and press

Open. If Themes was selected before, scroll to a theme and press View to open

the theme package.

Select and open a file, or press Options and use one of the following functions

that may be available for the selected file:

Delete, Send, Edit image, Move, Rename, Set as wallpaper, Set as ring tone,

Apply theme, Details, Type of view, Sort, Delete all, Open in sequence, Mute

audio (Unmute audio), Set contrast, Add folder, Memory status, Activate

content and Activation key list.

■ Media

Camera

You can take photos or record video clips with the phone’s built-in camera. The

camera produces pictures in JPEG format and the video clips in 3GP format.

The Nokia 6020 device supports an image capture resolution of 640 x 480 pixel. The image

resolution in these materials may appear different.

102

Taking a photo or a video clip

Press Menu, and select Media, Camera. The live image appears on the display, and

you can use the display as a viewfinder. Move the joystick to the left or to the right

to change the camera mode: Standard photo, Portrait photo or Video, or if the

lighting is dim for taking photos to Night mode. If you want to add the photo to a

name or a phone number saved in contacts, select Portrait photo.

• To take a photo, press Capture. A shutter sound is heard. The phone saves the

photo in the Images folder of the Gallery menu.

If you want to send the photo as a multimedia message, press Send.

Or select Back to take another photo, or press Options and select, for example,

an option to rename or zoom the saved photo, to set the contrast, to see the

details, to set the photo as wallpaper, to open the gallery or to delete it.

Tip: You can activate the self-timer of the camera for one picture at a

time. Put the camera in photo mode, press Options and select Self-

timer. Press Start, and after the timeout, the camera takes the photo.

While the self-timer is running, a beeping sound is heard.

•To start recording a video clip, press Record. When you are recording a

video clip, the remaining recording time is shown on the top of the display.

To pause the recording, press Pause and to resume the recording, press

Continue. To stop the recording, press Stop. The phone saves the recording in

the Video clips folder of the Gallery menu. To view the recorded video clip,

press Play.

103

Select Back to start recording a new video clip, or press Options and select, for

example, an option to delete or rename the saved video clip, to set the

contrast, or to see the details, to send it as a multimedia message, or to open

the gallery, or to mute/unmute the microphone.

Camera settings

Press Menu, and select Media, Camera. Press Options and depending on the

active camera mode the following options may appear: Change mode, Self-timer,

Mute/Unmute, Open gallery, or Settings to adjust the camera settings:

•

Default mode to define the default camera mode.

Image quality to define how much the photo file will be compressed when

saving the image. Select High, Normal or Basic. High provides the best image

quality but uses more memory.

•

Video clip length to select the length of the video clips that you record. The

maximum length of a video clip is approximately 50 seconds in duration,

depending on conditions. Only video clips that are of default length or shorter

can be sent in a multimedia message.

•

Camera sounds to set the shutter sound and the self-timer tone to On or Off.

Default title to define the title that will be used when saving a photo or a video

clip. If you select Automatic, the default title will be used, or if you select My

title, you can key in or edit a new title.

104

Voice recorder

You can record pieces of speech, sound or an active call for up to 5 minutes. For

example, this is useful when recording a name and phone number for writing

down later.

The recorder cannot be used when a data call or GPRS connection is active.

Recording

1. Press Menu, select Media and Voice recorder.

Note: If push to talk is not available in your network service, you can

also press the PTT key to activate the Voice recorder.

2. To start the recording, select Record. To start the recording during a call, press

Options, and select Record. While recording a call, all parties to the call will

hear a faint beeping sound every 5 seconds.

3. To end the recording, press Stop. The recording will be saved in the Recordings

folder of the Gallery menu.

4. To listen to the latest recording, select Play last recorded.

5. To send the latest recording, select Send last recorded. The recording can be

sent via IR or MMS.

List of recordings

Press Menu, and select Media, Voice recorder and Recordings list. The list of

folders in the Gallery is shown. Open Recordings to see the list with recordings.

105

■ Push to talk

Push to talk over cellular is a two-way radio service available over

a GSM/GPRS cellular network (network service). Push to talk

provides direct voice communication connected with the push of the PTT key.

You can use push to talk to have a conversation with one person or with a group

of people having compatible devices. When your call is connected, the person or

group you are calling does not have to answer the phone. Besides the GPRS

counters, the phone registers only one-to-one calls in the recent call lists in Call

where appropriate as there is no other confirmation whether the recipient(s) have

heard the call.

To check availability and costs, and to subscribe to the service, contact your

network operator or service provider. Roaming services may be more limited than

for normal calls.

If the push to talk service is not available from your provider, the PTT key of your

phone will activate the Voice recorder.

Before you can use the push to talk service, you must define the required push to

talk service settings.

While you are connected to the push to talk service, you can use the other

functions of the phone. The push to talk over cellular service is not connected to

traditional voice communication, and therefore many of the services available for

traditional voice calls (for example, voice mailbox) are not available for push to

talk over cellular communications.

106

Push to talk menu

Press Menu, and select Push to talk. The push to talk menu selection list is shown.

• To connect to or disconnect from the push to talk service, select Switch PTT on

or Switch PTT off.

• To view the received callback requests, select Callback inbox.

• To view the list of push to talk groups, select Group list.

• To view the list of contacts to which you have added the push to talk address,

select Contacts list.

• To add a new push to talk group to the phone, select Add group.

• To set the push to talk settings for use, select PTT settings.

• To set the required settings for the push to talk connection, select

Configuration settings.

• To open the browser and to connect to the push to talk network portal

provided by the service provider, select Web.

Connecting to and disconnecting from the push to talk service

• To connect to the push to talk service, press Menu, and select Push to talk, and

Switch PTT on. indicates the push to talk connection.

indicates that the

service is temporarily unavailable. The phone automatically tries to reconnect

to the service until you disconnect from the push to talk service. If you have

added group(s) to the phone, you are automatically joined to the active

107

(Default or Listened) groups, and the name of the default group is displayed in

standby mode.

• To disconnect from the push to talk service, select Switch PTT off.

Callback requests

If you make a one-to-one call and do not get a response, you can send a request

for the person to call you back.

When someone sends you a callback request, Callback request received is

displayed in standby mode. When you receive a callback request from someone

who is not in your contacts list, you can save the name to your contacts.

Sending a callback request

• To send a callback request from the contacts list in the Push to talk menu,

select Contacts list. Scroll to a contact, press Options, and select Send

callback.

• To send a callback request from the Contacts, move the joystick down in

standby mode, and scroll to the desired contact. Press Details, scroll to the

push to talk address, press Options, and select Send callback.

• To send a callback request from the group list in the Push to talk menu, select

Group list, and scroll to the desired group. Press Options, select Active

members, scroll to the desired contact, press Options, and select Send callback.

• To send a callback request from the callback request list in the Push to talk

menu, select Callback inbox. Scroll to a contact, press Options, and select Send

callback.

108

Responding to a callback request

1. To open the Callback inbox, press View. The list of nicknames of the persons

who have sent you callback requests is shown.

2. To make a one-to-one call, press the PTT key.

3. To send a call request back to the sender, press Options, and select Send

callback.

To delete the request, press Delete.

Saving the callback request sender

1. To open the Callback inbox, press View. The list of nicknames of the persons

who have sent you callback requests is shown.

2. To view the sender's push to talk address, press Options, and select View PTT

address.

To save a new contact or to add the push to talk address to a contact, press

Options, and select Save as or Add to contact.

Making and receiving a push to talk call

Set the phone to use either loudspeaker or earpiece for push to talk

communication. When the earpiece is selected, you can use the phone normally by

holding it to your ear.

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

When connected to the push to talk service, you can make or receive group calls or

one-to-one calls. One-to-one calls are calls you make to only one person.

109

Making a group call

• To make a call to the default group, press the PTT key. A tone sounds indicating

that the access is granted, and the phone displays your nickname and group

name.

To make a call to a non-default group, select Group list in the push to talk

menu, scroll to the desired group, and press the PTT key.

• Press and hold the PTT key the entire time you are talking, and hold the phone

in front of you so that you can see the display. When you have finished, release

the PTT key. Talking is allowed on a first-come, first-served basis. When

someone stops talking, the first person to press the PTT key can talk next.

Making a one-to-one call

• To start a one-to-one call from the list of contacts to which you have added

the push to talk address received from the service provider, select Contacts list.

Scroll to a contact, and press the PTT key.

You can also select the contact from the Contacts list.

• To start a one-to-one call from the list of push to talk groups, select Group list,

and scroll to the desired group. Press Options, select Active members, scroll to

the desired contact, and press the PTT key.

• To start a one-to-one call from the list of callback requests you have received,

select Callback inbox. Scroll to the desired nickname, and press the PTT key.

Receiving a group or a one-to-one call

• A short tone notifies you of an incoming group and one-to-one call. When

receiving a group call, the group name and the nickname of the caller are

110

displayed. When receiving a one-to-one call from a person whose information

you have saved in Contacts, the saved name is displayed if identified;

otherwise, only the nickname of the caller is displayed.

• You can either accept or reject an incoming one-to-one call if you have set the

phone to first notify you of the one-to-one calls.

• If you press the PTT key to try to respond to a group while another member is

talking, you hear a queuing tone and Queuing is displayed as long as you press

the PTT key. Press and hold the PTT key, and wait for the other person to finish,

then you can talk.

Adding one-to-one contacts

You can save the names of persons to whom you often make one-to-one calls.

• To add a push to talk address to a name in the Contacts:

Move the joystick down in standby mode, scroll to the desired contact, and

press Details. Press Options and select Add detail and PTT address.

• To add a contact to the push to talk contacts list:

To add the push to talk contact, open the push to talk menu, and select

Contacts list. Press Options, and select Add contact.

• To add a contact from the group list:

When connected to the push to talk service, select Group list, scroll to the

desired group, and press Options. Select Active members, scroll to the member

whose contact information you want to save, and press Options. Select Save as

111

to add a new contact, or Add to contact to add a push to talk address to a name

in the Contacts.

Creating and setting up groups

When you call a group, all members joined to the group hear the call

simultaneously.

Each member in the groups is identified by a nickname, which is shown as a caller

identification. Group members can choose a nickname for themselves in each

group.

Groups are registered with a URL address. One user registers the group URL in the

network by joining the group session the first time.

There are three types of push to talk groups:

• Provisioned groups are closed groups that allow only selected participants

provisioned by the service provider to join in the groups.

• Ad hoc groups are groups that the users can create. You can create your own

group, and invite members to the group.

• Ad hoc pro groups; you can create your own group from members in a

provisioned group. For example, a business can have a closed group, plus

separate groups created for certain business functions.

Adding a group

1. Press Menu, and select push to talk, Add group, and Guided.

2. To set the security level for the group, select Open group or Secured group.

112

If you select Secured group, the phone automatically creates a scrambled part

to the group address that the members cannot view when they receive the

invitation to the group. Only the person who creates the secured group, can

invite more members to the group.

3. Key in the name for the group, and press OK.

4. Select the status for the group: Default, Listened, or Inactive. The phone

indicates that the group is saved and its status. Default and Listened are active

groups. When you press the PTT key to make a group call, the default group is

called if you have not scrolled to any other group or contact.

5. To send an invitation to the group, press Yes when the phone requests for

sending an invitation. You can send the invitation using a text message or

infrared.

The members you invite to the open groups can also invite more members to

the group.

Receiving an invitation

1. When you receive a text message invitation to a group, Group invitation

received: is displayed.

2. To view the nickname of the person who sent the invitation and the group

address if the group is not a secured group, press View.

3. To add the group to your phone, press Save, and to set the status for the group,

select Default, Listened, or Inactive.

To reject the invitation, press Exit and Yes, or press View, Discard, and Yes.

113

Settings for push to talk

There are two kinds of push to talk settings: settings for use and for connecting to

the service.

You may receive the settings for connecting to the service as a configuration

message from your network operator or service provider, see Configuration

settings service on page 19. To key in the settings manually, see Configuration

settings on page 98.

To access the settings for connecting to the service, press Menu, and select Push

to talk, Config. settings. Select from following:

•

Configuration. Only the configurations that support the push to talk service

are shown. Select a service provider, or Default, or Personal config. for push to

talk service. You may receive the push to talk settings as a configuration

message, see Configuration settings service on page 19. To key in the

configuration settings manually, see Configuration settings on page 98.

•

Account and select a push to talk service account contained in the active

configuration settings.

• Select one by one to set the following: PTT user name, Default nickname, PTT

password, Domain and Server address .

To access the push to talk settings for use, press Menu, select Push to talk and PTT

settings. Select from following:

114

•

1 to 1 calls and On to select the phone to allow the reception of incoming one-

to-one calls. If you select Off, you can make but not receive one-to-one calls.

The service provider may offer some services that override these settings.

1 to 1 calls and Notify to set the phone to first notify you of incoming one-to-

one calls with a ringing tone.

•

Listened groups and On to activate the listened groups.

PTT status in startup and Yes to set the phone to automatically connect to the

push to talk service when you switch the phone on.

•

Send my PTT address and No to hide your push to talk address from group and

one-to-one calls.

■ Organiser

Alarm clock

You can set the phone to alarm at a desired time. Press Menu, and select

Organiser and Alarm clock.

To set the alarm, select Alarm time, and enter the alarm time. To change the alarm

time when the alarm time is set, select On. Select Repeat alarm to set the phone to

alert you on selected days of the week.

Select Alarm tone and select the default alarm tone, personalise the alarm tone by

selecting one from the ringing tone list or from Gallery.

115

When the alarm time expires

The phone will sound an alert tone, and flash Alarm! and the current time on the

display, even if the phone was switched off. Press Stop to stop the alarm. If you let

the phone continue to sound the alarm for a minute or press Snooze, the alarm

stops for about 10 minutes and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you press Stop, the device asks whether you want to

activate the device for calls. Press No to switch off the device or Yes to make and receive

calls. Do not press Yes when wireless phone use may cause interference or danger.

Calendar

The calendar uses shared memory, see Shared memory on page 15.

Press Menu, and select Organiser and Calendar.

The current day is indicated by a frame. If there are any notes set for the day, the

day is in bold type. To view the day notes, press View. To view a week, press

Options and select Week view. To view a single note, press View.

Other options for the calendar view may be options for creating a note, for

deleting, editing, moving and repeating a note and for copying a note to another

day, or for sending a note as a note directly to another compatible phone’s

calendar or as a text message or a multimedia message. In Settings you can set

the date, time, time zone, date or time format, or the first day of the week. In

Auto-delete notes you can set the phone to delete old notes automatically after a

specified time.

116

To delete all notes in the calendar, select the month or week view, press Options

and select Delete all notes.

Making a calendar note

Press Menu, and select Organiser and Calendar. Scroll to the date you want, press

Options and select Make a note. Select one of the following note types:

Meeting,

Call,

Birthday,

Memo or

Reminder.

When the phone sounds an alarm for a note

The phone beeps, and displays the note. With a call note

on the display, you

can call the displayed number by pressing

. To stop the alarm and to view the

note, press View. Press Snooze and the phone sounds an alarm again after 10

minutes. To stop the alarm without viewing the note, press Exit.

To-do list

You can save a note for a task that you have to do, select a priority level for the

note and mark it as done when you have completed it. You can sort the notes by

priority or by date. The to-do list uses shared memory, seeShared memory on page

15.

Press Menu, and select Organiser and To-do list.

Press Add note to make a note. Key in the note and press Save. Select the priority

for the note. The phone automatically sets the deadline without an alarm for the

note. To change the deadline, view the note and select the deadline option.

Or scroll to a note and press View or press Options. To add a new note, select Add.

For example, you can also view and delete the selected note and delete all the

117

notes that you have marked as done. You can sort the notes by priority or by

deadline, send a note to another phone, save a note as a calendar note, or access

the calendar. While viewing a note, you can also, for example, select an option to

edit the selected note, edit the deadline or priority for the note, or mark the note

as done.

Notes

You can use this application for writing and sending notes to compatible devices

via MMS. The Notes application uses shared memory, see Shared memory on page

15.

Press Menu and select Organiser and Notes. The phone will ask you to set the date

and time, if they have not already been set when you start to write a note. To add

a note, press Add note or press Options and select Make a note. Key in the note

and select Save. Or scroll to a note press View or press Options to see the options

for notes.

Wallet

In Wallet you can save personal information, for example, credit card numbers

and addresses. The data that are saved in the wallet can easily be retrieved while

browsing to automatically fill in data fields, for example, when making purchases

and the service supports wallet functionality. You can also save access codes to

mobile services that request a user name and password.

The data in the wallet are protected with a wallet code that you can define when

you access wallet for the first time. At Create wallet code: key in the code and

118

press OK to confirm it and at Verify wallet code: key in the code again and press

OK. See also Wallet code (4 to 10 digits) on page 17.

If you want to delete all the content of the wallet and the wallet code, key in

*#7370925538# (*#res wallet# in letters) in standby mode. You also need the

phone’s security code, see Access codes on page 16.

To add the content into the wallet menu, and to edit it, access the wallet menu. To

use the content of the wallet in a mobile service, access the wallet via the

browser, see Web on page 128.

Accessing the wallet menu

To access the wallet menu, press Menu, select Organiser and Wallet. Key in your

wallet code and press OK, see Wallet settings on page 121.

Select Wallet profiles to create card combinations, Cards to save personal card

information, Tickets to save the notifications of e-tickets that you have bought via

a mobile service, Receipts to save receipts of mobile purchases, Personal notes to

save all kinds of personal information that you want to keep protected by the

wallet PIN code, or Settings, see Wallet settings on page 121.

Saving card details

Access the wallet and select Cards. Select the card type to save details: Payment

cards, Loyalty cards, Access cards, User info cards, or Address cards. If no card is

added, press Add new, otherwise, press Options and select Add new. Fill in the

fields for the details and press Done.

If supported by your service provider, you can also receive card information to

your phone as a configuration message. You will be notified as to which category

119

the card belongs to. For availability of receiving card information as configuration

settings, contact the card issuer or service provider.

Personal notes

You can save personal notes, for example, account numbers, passwords, codes or

notations.

Access the wallet and select Personal notes. Press Options and you can view, add,

edit a selected note and sort notes either by name or date or delete notes. When

viewing a note, you can edit or delete the selected note. The option Send via text

msg. is for copying the note as a text message and Copy to calendar is for copying

the note to the calendar as a memo. Use detail is for extracting numbers, e-mail

addresses and web addresses from a note.

Creating a wallet profile

When you have saved your personal card details, you can combine them together

into a wallet profile. You can use the profile to retrieve wallet data from different

cards while browsing.

1. Access the wallet and select Wallet profiles.

2. To create a new wallet profile if no profile is added, press Add new. Otherwise,

press Options and select Add new.

3. Fill in the following fields and press Done. Select Select payment card next,

Select loyalty card next, Select access card next, Select user info card next,

Select billing address next, Select shipping address next, Select receipt delivery

address next, Select receipt delivery method next and Wallet profile name:.

120

Wallet settings

Access the wallet and select Settings. Select Change code to change the wallet

code. Select RFID to set the RFID ID with the RFID code and RFID type. (RFID =

Radio Frequency Identification, technology to conduct commercial transactions

using your phone).

Guidelines for paying for your purchases with the wallet

• To do your shopping, access the desired service site that supports the wallet.

The service needs to support the Electronic Commerce Modelling Language

specification. See Making a connection to a service on page 130.

Choose the product that you want to buy and carefully read all information

provided before your purchase.

The text may not fit within a single screen. Therefore, make sure to scroll

through and read all of the text before your purchase.

• To pay for the items that you wish to buy, the phone asks whether you want to

use wallet or not. The phone also asks for your wallet PIN code.

• Select the card that you want to pay with from the Payment cards list.

Provided that the data form you receive from the service provider supports the

Electronic Commerce Modelling Language specification, the phone

automatically fills in the credit card information or the wallet profile from the

wallet.

• Approve the purchase, and the information is forwarded.

• You may receive an acknowledgement or a digital receipt of the purchase.

121

• To close the wallet, select Close wallet. If you do not use the wallet for 5

minutes, it will be automatically closed.

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache.

To empty the cache, see Cache memory on page 135.

Synchronisation

Synchronisation allows you to save your calendar and contacts data on a remote

Internet server (network service) or on a compatible PC. If you have saved data on

the remote Internet server, you can synchronise your phone by starting the

synchronisation from your phone. You can also synchronise the data in your

phone’s contacts, calendar and notes to correspond to the data of your

compatible PC by starting the synchronisation from your PC.

The contact data in your SIM card will not be synchronised.

Synchronising from your phone

Before synchronising from your phone via internet, you need to subscribe to a

synchronisation service and get the configuration settings from your provider. For

more information on availability and the synchronisation service settings, contact

your service provider.

To start the synchronisation from your phone:

1. Activate the connection settings you need for the synchronisation. See

Settings for the synchronisation from your phone on page 123.

122

2. Press Menu, select Organiser, Synchronisation, Server sync. Select Data to be

synchronised and mark the data to be synchronised and press Done. Then

selectSynchronise. The marked data of the active set will be synchronised after

confirmation.

Settings for the synchronisation from your phone

You may receive the synchronisation settings as a configuration message from the

service provider. For more information on availability and the synchronisation

service settings, contact your service provider. For receiving the settings as a

configuration message, see Configuration settings service on page 19. To key in

the settings manually, see Configuration settings on page 98.

Press Menu, select Organiser, Synchronisation and Server sync and Sync settings.

Select Configuration and scroll to the service provider whose settings you would

like to activate and press Select. Select Account to see the accounts provided by

the service provider. If more than one account is displayed choose the one you

want to use.

Synchronising from your compatible PC

To synchronise contacts, the calendar and the notes from your PC, use a data

cable. You also need the PC Suite software of your phone installed on the PC. Start

the synchronisation from the PC using PC suite.

Ensure that the phone is in standby mode and that the time and date are set.

123

■ Applications

Games and applications

Your phone software may include some games and Java applications specially

designed for this Nokia phone.

Launching a game or an application

Press Menu, and select Applications, then Games and Select game, or Collection

and Select application. Scroll to a game or an application and press Open or press

The following options may be available for games and applications:

•

Delete to delete the game or application from the phone.

Details to give additional information about the game or application.

Update version to check if a new version is available for download from the

services (network service).

•

Web page to provide further information or additional data from an Internet

page. This feature needs to be supported by the network.

App. access to restrict the game or application from accessing the network to

prevent you from accruing unexpected costs. Select Communication and

Network access , Messaging , or select Auto-start. Select in each category, if

available, one of the following permissions: Ask every time, Ask first time only,

Always allowed, Not allowed.

124

Game and application downloads

Your phone supports J2ME^TMJava applications. Make sure that the application is

compatible with your phone before downloading it.

Press Menu, and select Applications, Games and Game downloads or Collection

and App. downloads. The list of available bookmarks is shown. Select More

bookmarks to access the list of bookmarks in the Web menu, see Bookmarks on

page 133.

Select a bookmark to connect to the desired service. For the availability of

different services, pricing and tariffs, contact your service provider.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

Note that when downloading an application, it may be saved in the

Games menu instead of the Applications menu.

Game settings

Press Menu, and select Applications, Games and App. settings to set sounds, lights

and shakes for games.

Memory status for games and applications

To view the amount of memory available for game and application installations

(third shared memory), press Menu, and select Applications, Games or Collection

and then Memory.

The games and applications use shared memory, see Shared memory on page 15.

125

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

Press Menu, and select Applications, Extras and Calculator. When ’0’ is

displayed on the screen, key in the first number in the calculation, press

for a

decimal point. Press Options and select Add, Subtract, Multiply, Divide, Square,

Square root or Change sign. Key in the second number. To get the answer, press

Equals. To start a new calculation, first press and hold Clear.

Performing a currency conversion

Press Menu, and select Applications, Extras and Calculator. To save the exchange

rate, press Options and select Exchange rate. Select either of the displayed

options. Key in the exchange rate, press

for a decimal point, and press OK.

The exchange rate remains in the memory until you replace it with another one. To

perform the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

Countdown timer

Press Menu, and select Applications, Extras and Countdown timer. Key in the

alarm time in hours, minutes and seconds and press OK. If you wish, write your

own note text which is displayed when the time expires, and press Start to start

the countdown timer.

126

To change the countdown time, select Change time. To stop the timer, select Stop

timer.

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes the note text if it is set or else Countdown time up. Stop the

alarm by pressing any key. If no key is pressed, the alarm automatically stops

within 30 seconds. To stop the alarm and to delete the note text, press Exit.

Stopwatch

You can measure time, take intermediate times or lap times using the stopwatch.

During timing, the other functions of the phone can be used. To set the stopwatch

timing in the background, press

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Time observation and time splitting

1. Press Menu, and select Applications, Extras, Stopwatch and Split timing. You

can select Continue if you have set the timing in the background.

2. Press Start to start the time observation. Press Split every time you want to

take an intermediate time. The intermediate times are listed below the running

time on the display. Scroll to view the times.

3. Press Stop to stop the time observation.

4. To save the times, press Save. Or press Options and you can start the time

observation again or reset the times without saving it.

127

Lap times

Press Menu, and select Applications, Extras, Stopwatch and Lap timing. Press

Start to start the time observation and Lap to take a lap time. Press Stop to stop

the lap timing. To save the times, press Save and enter a name. Or press Options

and you can save or reset the lap times.

Viewing and deleting times

Press Menu, and select Applications, Extras and Stopwatch.

If the stopwatch is not reset, you can select Show last to view the most recent

measured time. Select View times and select the time set that you want to view.

To delete the saved times, select Delete times. Select Delete all and press OK, or

select One by one, scroll to the times you want to delete, press Delete and press

OK.

■ Web

You can access various mobile Internet services with your

phone’s browser.

Check the availability of these services, pricing and tariffs with

your network operator and/or the service provider.

With your phone’s browser you can view the services that use Wireless Mark-Up

Language (WML) or extensible HyperText Mark-up Language (XHTML) on their

pages. Appearance may vary due to screen size. Note that you may not be able to

view all the details of the Internet pages.

128

Important: Use only services that you trust and that offer adequate security and

protection against harmful software.

Basic steps for accessing and using services

1. Save the service settings that are required to access the service that you want

to use. See Setting up the phone for a service on page 129.

2. Make a connection to the given service. See Making a connection to a service

on page 130.

3. Start browsing the pages of the service. See Browsing the pages of a service on

page 130.

4. Once you are finished browsing, end the connection to the service. See

Disconnect from a service on page 132.

Setting up the phone for a service

Your phone may have stored some service settings. Additional settings may be

received as a configuration message from the service provider that offers the

service that you want to use. To receive the service settings as a configuration

message, see Configuration settings service on page 19 and Configuration

settings on page 98.

For more information and for the appropriate settings, contact your service

provider.

129

Making a connection to a service

Make sure that the service settings of the service you want to use are activated. To

activate the settings, press Menu, and select Web, Settings and Configuration

settings. Select Configuration and select the configuration set you want to

activate.

Make a connection to the service. There are several ways to connect:

• Open the start page, for example, the home page of the service provider: press

Menu, and select Web and Home, or in standby mode press and hold

• Select a bookmark of the service: press Menu, and select Web, Bookmarks, and

select a bookmark. If the bookmark does not work with the current active

service settings, activate another set of service settings and try again.

• Select the last URL: press Menu, and select Web, Last web addr..

• Key in the address of the service: press Menu, and select Web and then Go to

address. Key in the address of the service and press OK.

Browsing the pages of a service

After you have made a connection to the service, you can start browsing its pages.

The function of the phone keys may vary in different services. Follow the text

guides on the phone display. For more information, contact your service provider.

Note that if GPRS is selected as the data bearer, the indicator

top left of the display during browsing. If you receive a call or a text message, or

make a call during an (E)GPRS connection, the indicator will be shown on the

is shown on the

top left of the display to indicate that the (E)GPRS connection is suspended (on

130

hold). After a call, for example, the phone tries to reconnect the (E)GPRS

connection.

Using the phone keys while browsing

• Use the joystick to browse through the page.

• To select a highlighted item, press

for opening the link.

, or press Options to select the option

and to enter special

• To enter letters and numbers, press the keys

characters, press the key

Options while browsing

Press Options and the following options may be available. The service provider

may also offer other options. Select Shortcuts, Home, Add bookmark, Bookmarks,

History, Page options, Download links, Save to folder, Other options, Reload, Quit.

A cache is a memory location that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed is

stored in the cache. To empty the cache, see Cache memory on page 135.

Direct calling

The browser supports functions that you can access while browsing. You can make

a voice call, send DTMF tones while a voice call is in progress, and save a name and

a phone number from a page.

131

Disconnect from a service

To quit browsing and to end the connection, press Options and select Quit. When

Quit browsing? is shown, press Yes.

Alternatively, press

twice, or press and hold

Appearance settings of the browser

While browsing, press Options and select Other options and Appear. settings, or in

standby mode, press Menu, and select Web, Settings and Appearance settings.

Select

•

Text wrapping. Select On and the text continues on the next line. If you select

Off, the text will be abbreviated.

• Select Font size and choose a size.

•

Show images. Select No and any pictures appearing on the page are not shown.

Alerts and select Alert for unsecure connection and Yes to set the phone to

alert when a secure connection changes to an insecure one during browsing.

Select Alert for unsecure items and Yes to set the phone to alert when a secure

page contains an insecure item. Note that these alerts do not guarantee a

secure connection. For more information, see Browser security on page 136.

•

Character encoding to select the character set that the phone uses for showing

browser pages that do not include that information or to select whether to

always use UTF-8 encoding when sending a Web address to a compatible

phone.

132

A cookie is data that a site saves in your phone’s browser cache memory. The data

can be, for example, your user information or your browsing preferences. Cookies

will be saved until you clear the cache memory, see Cache memory on page 135.

While browsing, press Options and select Other options, Security and Cookie

settings, or in standby mode, press Menu, and select Web, Settings, Security

settings and Cookies. Select Allow or Reject to allow the phone to or prevent the

phone from receiving cookies.

Bookmarks

You can save page addresses as bookmarks in the phone’s memory.

1. While browsing, press Options and select Bookmarks,

or in standby mode, press Menu, and select Web and Bookmarks.

2. Scroll to the bookmark that you want to use and press Select to make a

connection to the page associated with the bookmark.

Or select Options to view the title and the address of the selected bookmark,

edit or delete the selected bookmark, or send it directly to another phone as a

bookmark, or as a text message, or create a new bookmark.

Your device may have some bookmarks loaded for sites not affiliated to Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

133

Receiving a bookmark

When you have received a bookmark (sent as a bookmark) 1 bookmark received is

displayed. Press Show to view the bookmark. To save the bookmark, press Save, or

press Options and select View to see the details or Delete to discard it.

Downloading

To download more tones, graphics, games, videos, themes or applications to your

phone (network service), press Menu, and select Web and Download links. Select

Tone downloads, Graphic downloads, Game downloads, Video downloads, Theme

downloads or App. downloads.

Important: Only install and use applications and other software from sources that

offer adequate security and protection against harmful software.

For the availability of different services, pricing and tariffs, contact your

network operator and/or service provider.

Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider (network service). Service messages are notifications of, for

example, news headlines, and they may contain a text message or an address of a

service.

To access the Service inbox in standby mode, when you have received a service

message, press Show. If you press Exit the message is moved to the Service inbox.

To access the Service inbox later, press Menu, and select Web and Service inbox.

134

To access the Service inbox while browsing, press Options and select Other

options and Service inbox. Scroll to the message that you want, press Retrieve to

activate the browser and download the marked content or press Options and

select Details to display detailed information on the service notification, or select

Delete to delete it.

Service inbox settings

Press Menu, and select Web, Settings and Service inbox settings. Select Service

messages and On (or Off) to set the phone to receive (or not to receive) service

messages.

Select Message filter and On to set the phone to receive service messages only

from content authors approved by the service provider. To view the list of the

approved content authors, select Trusted channels.

Select Automatic connection. If you have set the phone to receive service

messages and select On, the phone will automatically activate the browser from

standby mode when the phone has received a service message. If you select Off,

the phone will activate the browser only after you have selected Retrieve when

the phone has received a service message.

Cache memory

The information or services that you have accessed are stored in the cache of your

phone. A cache is a buffer memory, which is used to store data temporarily. To

empty the cache while browsing, press Options and select Other options and Clear

the cache, or in standby mode, press Menu, and select Web, and Clear the cache.

135

Browser security

Security features may be required for some services, such as banking services or

online shopping. For such connections you need security certificates and possibly

a security module which may be available on your SIM card. For more information,

contact your service provider.

Security module

The security module can contain certificates as well as private and public keys. The

purpose of the security module is to improve security services for applications

requiring browser connection, and it allows you to use a digital signature. The

certificates are saved in the security module by the service provider.

Press Menu and select Web, Settings, Security settings and Security module

settings. Select from following options:

•

Security module details to show the security module title, its status,

manufacturer and serial number.

Module PIN request to set the phone to request the module PIN when using

services provided by the security module. Key in the code and select On. To

disable the module PIN request, select Off.

•

Change module PIN to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then enter the new code twice.

Change signing PIN. Select the signing PIN that you want to change. Enter the

current PIN code, then enter the new code twice.