Emerson SB110A User Manual

PORTABLE CD PLAYER  
OWNER'S MANUAL  
SB110/SB111/SB110A  
Copyright 2004 Viacom International Inc. All Rights Reserved. Nickelodeon,  
SpongeBob SquarePants and all related titles, logos and characters are  
trademarks of Viacom International Inc. Created by Stephen Hillenburg.  
Emerson Radio Corp. has produced this audio product under  
license from Nickelodeon. We have taken great care to  
make sure your unit was in perfect working order when it left  
our factory.  
It has been designed to give you many years of enjoyment  
and trouble free operation. Read this manual before  
operating this unit to become familiar with its features. In the  
event you require technical assistance, please contact the  
Emerson Radio Customer Service hotline at 1-800-898-9020.  
Retain this manual for future reference.  
NOTES:  
• Please avoid using this unit in places of high temperature  
or humidity over prolonged periods of time as damage  
may occur.  
• Exposure to direct sunlight in places such as car interiors  
may cause the unit to become warped and/or lead to  
malfunctioning.  
• Avoid using or storing this unit in dusty or sandy locations.  
For future reference, record the serial number in the space  
provided.  
Model No: SB110/SB111/SB110A  
Serial No:________________  
2
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of  
your musical enjoyment. Now it’s time to consider how you can maximize the fun and  
excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your equipment  
by playing it at a safe level. One that lets the sound come through loud and clear without  
annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s Consumer Electronics Group recommend you  
avoid prolonged exposure to excessive noise. This list of sound levels is included for your  
protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT  
EXPOSURE:  
We  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
WantYou  
LISTENING  
ForALifetime  
100  
120  
140  
180  
Rocket launching pad  
EIA  
EST. 1924  
Information courtesy of the Deafness Research Foundation.  
3
LOCATION OF CONTROLS  
1 2 3  
4
5
6
7
8
9
10  
11  
12  
13 14 15 16 17  
1. ESP Button  
10. Display  
2. MODE Button  
11. DBBS (Bass Boost) Switch  
3. CD OPEN Button  
12. PLAY/PAUSE (  
ON Button  
) /POWER  
4. PROG (Program) Button  
13. STOP (I)/ POWER OFF  
5. DC 4.5V Jack (Side of Unit)  
Button  
+
14. SKIP/SEARCH (  
15. SKIP/SEARCH (  
16. VOLUME Control  
) Button  
) Button  
6. CD Compartment  
7. Battery Compartment (Bottom  
of Unit)  
17. Headphones Jack (Side of  
Unit)  
8. LINE OUT Jack (Side of Unit)  
9. HOLD Switch  
4
POWER SOURCES  
This CD player requires either two (2) “AA” cell batteries (not included) or the AC  
adapter (not included).  
BATTERY INSTALLATION  
The battery indicator (  
replacing.  
) will appear in the CD display when the batteries need  
1. Open the CD Compartment, then open the battery  
compartment door by pressing in on the tab and then  
lifting it. To prevent the possibility of losing the  
cover, it cannot be removed.  
2. Insert two (2) “AA” cell batteries (not included)  
according to the polarity diagram inside the battery  
compartment. Alkaline batteries are recommended for the longest playing time.  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery  
compartment. Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with  
fresh ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
(Follow battery manufacturer’s directions.)  
AC OPERATION  
To operate the unit using AC power, connect the AC adapter (not included) to a 120V,  
60Hz AC outlet only. Plug the small end into the DC 4.5V jack on the side of the unit  
and connect the other end into the AC outlet. The batteries are automatically  
disconnected when the AC adapter is used.  
CAUTION: When not using AC power, disconnect the AC adapter from the wall  
outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet  
hands. Fully insert the plug without exposing any part of the blade.  
Input: 120V 60Hz AC  
Output: 4.5V DC, 500 mA.  
r, UL Listed.  
Plug: 1.7 mm Female Type with Positive Cente  
Negative ( )  
Positive (+)  
5
OPERATION  
TURNING POWER ON/OFF  
BASS BOOST  
1
1
2
1
To emphasize the bass, slide the To turn the unit on, press the  
DBBS switch to the ON position. For  
normal bass, slide the DBBS switch to  
the OFF position.  
PLAY/PAUSE (  
button .  
To turn unit off, Press the STOP (I)  
)/POWER ON  
/POWER OFF button ƒ.  
HOLD SWITCH  
AUTO POWER OFF  
1
When the unit is stopped (Standby  
mode) for approximately one minute,  
the power will automatically turn off.  
To prevent accidentally pressing a  
button while walking, etc., slide the  
HOLD switch to the ON position;  
“HOLD” will appear in the display.  
When you want to use the buttons,  
slide to the OFF position; “HOLD” will  
disappear from the display.  
Sound Through a Home Audio System  
By using a home audio connection cable (not included), superb sound can be  
heard through your home audio system. Before making any connections, turn off  
the power to all equipment.  
Plug a connection cable (not included) between the LINE OUT jack on the side  
of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to  
the amplifier’s PHONO jack.)  
NOTE: If the unit interferes with TV reception, move the unit away from the TV  
or turn off the power to this unit.  
6
CD OPERATION  
TO PLAY A CD (THIS UNIT CAN PLAY STANDARD OR CDR/RW  
DISCS)  
2
1
While the unit is off, press the  
Open the CD compartment lid by  
pressing the CD OPEN button. Gently  
press a disc, label side up, onto the  
spindle until it locks in place. Close the  
CD compartment lid. Insert headphones  
into the Headphones jack.  
PLAY/PAUSE (  
to start playback. To pause PLAYBACK,  
press the PLAY/PAUSE ( )/POWER  
)/POWER ON button  
ON button again, the display will blink.  
Press once again to resume playback.  
4
3
3
1
2
Adjust the VOLUME control and DBBS When the disc is through playing, it will stop.  
Press the STOP (I)/POWER OFF button to  
stop the disc before it is finished; the total  
number of tracks and playing time will  
appear. Press the STOP (I)/POWER OFF  
button again while in the stop mode to turn  
the unit off or wait approximately 60 seconds  
and the unit will automatically turn off.  
switch ƒ as desired. To skip forward or  
backward through the tracks on the disc,  
press the SKIP/SEARCH  
or  
button. To search forward or backward  
through the tracks on the disc, press and hold  
the SKIP/SEARCH  
or  
button.  
NOTES:  
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.  
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will  
show “disc”.  
• As each track is played, the track number and elapsed time are shown in the display.  
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently  
press the center spindle and lift the CD.  
• The maximum time of a CD is 74 minutes for this unit.  
• “OPEN” will appear in the display when the CD Door is opened.  
• This unit will play standard or CDR/RW discs.  
7
CD OPERATION (CONTINUED)  
MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM  
This CD player has a built-in Anti-Shock System that cuts down on CD skipping,  
which is useful when using the CD player in the car or while jogging/walking.  
Follow the steps below to activate and understand the Anti-Shock System:  
2
1
With a CD inserted, press the  
Open the CD compartment lid by  
pressing the CD OPEN button. Gently  
press a disc, label side up, onto the  
spindle until it locks in place. Close  
the CD compartment lid. Insert  
headphones into the Headphones  
jack.  
PLAY/PAUSE (  
)/POWER ON  
button to turn the unit on.  
4
3
Within a few seconds, the Anti-Shock  
indicator will fill to indicate music  
signals are stored in memory.  
The Anti-Shock System will start  
automatically, the sound will mute for a  
moment and the display will show the  
Anti-Shock indicator with no bars in it.  
CONTINUED ON THE NEXT PAGE  
8
CD OPERATION (CONTINUED)  
6
5
If the CD player is subject to vibration If all the bars disappear and the CD  
during playback, the bars will player is subject to immediate vibration,  
disappear one by one. During the the unit may skip.  
vibration, the music should continue to  
play the signals stored in the memory  
until the CD player can read the music  
data properly from the disc. At this  
time, the indicator will probably show  
fewer bars indicating the music signals  
stored in memory are low.  
8
7
If no more vibration occurs, the To turn the Anti-Shock System off,  
music signals are once again stored press the ESP button.  
into the memory and the indicator To turn the Anti-Shock System on,  
returns to full. When the memory is press the ESP button again.  
full, the top bar will blink and the  
disc rotation speed will drop to save  
power consumption.  
NOTES:  
When the CD player is used in a stable location, turn the Anti-Shock System  
off by pressing the ESP button. When the Anti-Shock System is Off, battery  
consumption is less.  
The Anti-Shock System provides for continuous sound output when unit is  
subject to vibration, but it will not correct errors, such as a defective or dirty  
CD.  
9
CD OPERATION (CONTINUED)  
TO REPEATEDLY PLAY BACK ONE TRACK  
2
1
4
1
2
3
1
3
With a CD inserted, press the The unit will then play the same track  
over and over until the STOP  
(I)/POWER OFF button is pressed.  
Adjust the VOLUME control ƒ and  
DBBS switch as desired.  
PLAY/PAUSE (  
button to turn the unit on, then select  
a track using the SKIP/SEARCH  
or button. Press the MODE  
)/POWER ON  
ƒ
button once; the Repeat 1 indicator  
1 will appear in the display.  
TO REPEATEDLY PLAY BACK ALL TRACKS  
1
2
2
1
2
1
3
With a CD inserted, press the  
PLAY/PAUSE ( )/POWER ON  
button to turn the unit on. Press the  
The unit will then play all the tracks on  
the CD over and over until the STOP  
(I)/POWER OFF button is pressed.  
Adjust the VOLUME control ƒ and  
DBBS switch as desired.  
MODE button ƒ twice; the Repeat All  
ALL  
indicator  
display.  
will appear in the  
TO CANCEL OR STOP REPEAT PLAYBACK  
TO STOP REPEAT PLAYBACK, press the STOP (I)/POWER OFF button once.  
TO CANCEL REPEAT PLAYBACK, press the MODE button until no repeat  
indicator appears in the display. The unit will continue normal playback.  
10  
CD OPERATION (CONTINUED)  
INTRO PLAY  
2
1
3
2
1
2
1
3
With a CD inserted, press the  
PLAY/PAUSE (  
button to turn the unit on and press  
Press the PLAY/PAUSE (  
)/POWER ON ON button to begin playback. The unit  
)/POWER  
will play the first 10 seconds of each  
the STOP (I)/POWER OFF button ƒ track. Adjust the VOLUME control ƒ  
to stop auto playback. Press the MODE and DBBS switch as desired. Press  
button three times; the INTRO  
the STOP (I)/POWER OFF button ꢀ  
indicator will appear in the display.  
to stop Intro playback.  
TO CANCEL Intro Play, press the Mode button twice.  
TO RANDOMLY PLAY BACK A CD  
1
2
3
2
1
2
1
3
With a CD inserted, press the  
PLAY/PAUSE (  
button to turn the unit on and press  
Press the PLAY/PAUSE (  
)/POWER ON ON button to begin playback. The  
)/POWER  
unit will play all the tracks in random  
the STOP (I)/POWER OFF button ƒ order. Adjust the VOLUME control ƒ  
to stop auto playback. Press the and DBBS switch as desired. When  
MODE button four times; the  
all the tracks have been played, the  
SHUFF indicator will appear in the unit will stop. Press the STOP  
display.  
(I)/POWER OFF button to stop  
Random playback.  
TO CANCEL Random Play, press the Mode button once.  
11  
CD OPERATION (CONTINUED)  
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)  
2
1
2
3
2
1
1
You cannot program a disc during  
playback. If the disc is playing, press the  
STOP (I)/POWER OFF button to first  
stop playback and then follow the  
programming steps as follows. Press the  
PROG button ƒ; the track number and  
PROG indicator will blink in the CD display.  
Select the first track to be played back  
using the SKIP/SEARCH or  
ƒ button, then press the PROG button  
again. Repeat this step to program  
additional tracks up to a maximum of  
20 tracks.  
4
3
2
1
2
1
3
To skip forward or backward through  
the programs, press the SKIP/  
Press the PLAY/PAUSE  
/POWER ON button to begin  
(
)
SEARCH  
or  
ƒ button.  
Programmed playback and adjust the  
VOLUME control ƒ and DBBS switch When the disc is through playing, it will  
stop.  
as desired.  
NOTES:  
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.  
As each program is played, the track number is shown in the display.  
To clear the memorized program: press the STOP (I)/POWER OFF button  
again while in the stop mode, wait approximately 60 seconds and the unit will  
turn off or open the CD compartment.  
Programming is the ability to preselect the order in which a series of tracks  
will be played.  
Each track may be stored in the program memory as many times as desired  
(up to 20 tracks).  
12  
CARE AND MAINTENANCE  
Caring for Compact Discs  
Treat the compact disc carefully. Handle the  
compact disc only by its edges. Never allow your  
fingers to come in contact with the shiny,  
unprinted side of the compact disc.  
Do not attach adhesive tape, stickers, etc. to  
the compact disc label.  
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use  
detergents or abrasive cleaners to clean the compact disc. If necessary, use a  
CD cleaning kit.  
If a compact disc skips or gets stuck on a section of the disc, it is probably dirty  
or damaged (scratched).  
Z
When cleaning the compact disc, wipe in straight lines from the  
center of the compact disc to the outer edge of the compact disc.  
Never wipe in circular motions.  
This unit is designed to play only compact discs bearing the identification logo  
as shown here. Other compact discs may not conform to the CD standard and  
may not play properly.  
Compact discs should be stored in their cases after each use to avoid  
damage.  
Do not expose compact discs to direct sunlight, high humidity, high  
temperatures, or dust, etc. Prolonged exposure or extreme temperatures can  
warp the compact disc.  
Do not stick or write anything on either side of the compact disc. Sharp writing  
instruments, or the ink may damage the surface.  
Cleaning the unit  
To prevent fire or shock hazard, disconnect your unit from the AC power  
source when cleaning.  
The finish on your unit may be cleaned with a dust cloth and cared for as other  
furniture. Use caution when cleaning and wiping the plastic parts.  
Mild soap and a damp cloth may be used on the front panel.  
13  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
SYMPTOM  
Unit will not  
CAUSE  
SOLUTION  
Weak or dead batteries Replace batteries and insert  
turn on.  
or inserted incorrectly. correctly.  
Weak or dead Re-  
chargeable batteries.  
AC adapter  
not connected.  
CD compartment  
not closed.  
Recharge or replace  
batteries (if used).  
Check AC adapter  
connection.  
Disc will not play.  
Close CD compartment.  
Disc inserted  
incorrectly.  
Dirty or defective  
disc.  
Reinsert disc correctly.  
Try another disc.  
Moisture  
condensation  
on disc.  
Wipe disc with soft  
cloth.  
Erratic CD playback.  
Dirty or defective  
disc.  
Clean or replace disc.  
No sound from  
headphones.  
Headphone  
plug not inserted  
correctly.  
Reinsert headphone  
plug correctly.  
VOLUME control  
set to minimum.  
Weak batteries.  
Defective disc.  
ESP is not activated.  
Increase volume.  
Replace batteries.  
Try another disc.  
Press the ESP button.  
ESP not working.  
14  
EMERSON RADIO CORP.  
LIMITED WARRANTY  
Emerson Radio Corp. warrants manufacturing defects in original material, including original  
parts and workmanship, under normal use and conditions, for a period of ninety (90) days  
from the date of original purchase in the U.S. With your dated proof of purchase, we will  
provide repair service at no charge for labor and parts at an authorized Depot Repair  
Facility, or replace the product in our discretion. For repair or replacement, pack your unit in  
a padded box, enclose your check or money order payable to Emerson Radio Corp. in the  
amount of $9.00 (not required by California residents) to cover shipping and handling costs,  
and enclose a copy of your proof of purchase. Send your unit to:  
Emerson Radio Corp.  
1901 Diplomat Drive  
Farmers Branch, TX 75234  
This warranty does not cover damage from negligence, misuse, abuse, accident, failure to  
follow operating instructions, commercial use, rental, repairs by an unauthorized facility, or  
products purchased, used, serviced or damaged outside of the United States.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE  
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
AU898M  
15  
¤
EMERSON  
PART NO.: 21-2046  
407-02  
Printed in China  

LG Electronics BLISS UX700W User Manual
LG Electronics 620G User Manual
La Crosse Technology WS 6118AL IT User Manual
Kenwood KDC U7046BT User Manual
JVC CD Receiver KD SH77R User Manual
Huawei Technologies Cell Phone Y 101 User Manual
Emerson cks3528 User Manual
Brother MFC 5860CN User Manual
Black Box RM194A User Manual
ABB C1900 QC User Manual