Tune BlossomTM Personal CD Player
See page 15
for your hidden
GEMSTONE FUN
button surprise!
OWNER'S MANUAL
BAR100
Barbie and associated trademarks and trade dress are owned by, and used under
license from, Mattel, Inc. ©2007 Mattel, Inc. All Rights Reserved.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
INFORMATION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this unit near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation
openings. Install in accordance
with manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat
registers, stoves or other
apparatus (including amplifiers)
that produce heat.
2
9. Do not defeat the safety
purpose of the polarized or
unit has been exposed to rain
or moisture, does not operate
normally, has changed its
performance or has been
dropped.
grounding-type
plug.
A
polarized plug has two blades
with one wider than the other.
A grounding-type plug has two
blades and a third grounding
prong. The wide blade or the
third prong are provided for
your safety. If the provided plug
does not fit into your outlet,
consult an electrician for
replacement of the obsolete
outlet.
14. This unit should not be
exposed to dripping or
splashing water and no object
filled with liquids such as vases
should be placed on the unit.
15. Do not overload wall outlet.
Use only power source as
indicated.
16. Use replacement parts as
10. Protect the power cord from
specified by the manufacturer.
being walked on or pinched
17. The product may be mounted
to a wall only if recommended
by the manufacturer.
18. Upon completion of any
service or repairs to this
product, ask the service
technician to perform safety
checks.
particularly
at
plugs,
convenience receptacles, and
the point where they exit from
the unit.
11. Only
use
attachments/
accessories specified by the
manufacturer.
12. Unplug this unit during
lightning storms or when
unused for long periods of
time.
13. Refer all servicing to qualified
service personnel. Servicing is
required when the unit has
been damaged in any way,
such as the following: the
power-supply cord or plug has
been damaged; liquid has
been spilled or objects have
fallen into the unit; and/or the
3
Emerson Radio Corp. has produced this audio product under
license from Mattel. We have taken great care to make sure your
unit was in perfect working order when it left our factory.
It has been designed to give you many years of enjoyment and
trouble-free operation. Read this manual before operating this unit
to become familiar with its features. In the event you require
technical assistance, please contact the Emerson Radio Customer
Service hotline at 1-800-898-9020. Retain this manual for
future reference.
WARNING
0-5
Choking Hazard–Small Parts and Packaging Materials. Not for children
under 5 years.
•
All materials for fastening or packing purposes are not part of the unit and
should be discarded for children’s safety.
Please keep all information for future reference.
This is not a toy.
•
•
NOTES:
•
•
•
Please avoid using this unit in places of high temperature or
humidity over prolonged periods of time as damage may occur.
Exposure to direct sunlight in places such as car interiors may
cause the unit to become warped and/or lead to malfunctioning.
Avoid using or storing this unit in dusty or sandy locations.
4
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement
your equipment offers. This manufacturer and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of your equipment by playing it at
a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
•
•
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
•
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association’s Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for
your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
50
60
70
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER
CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
We
WantYou
100
120
140
180
LISTENING
ForALifetime
Rocket launching pad
EIA
EST. 1924
Information courtesy of the Deafness Research Foundation.
5
LOCATION OF CONTROLS
1
2
9
10
11
12
3
4
5
13
14
15
6
7
16
1. DC 4.5V Jack
10. PHONES Jack
(Side of Unit)
(Side of Unit)
2. Display
3. Battery Compartment
(Rear of Unit)
11. GEMSTONE FUN Button
12. POWER ON/PLAY/
PAUSE ®p Button
4. CD Compartment
5. SKIP/SEARCH o Button
6. PROG. Button
13. VOLUME Control
14. POWER OFF/
STOP X Button
7. ASP (Anti-Shock
Protection) Button
15. MODE Button
16. CD Door OPEN Switch
8. HOLD (ON/OFF) Switch
9. SKIP/SEARCH n Button
6
LOCATION OF CONTROLS (CONTINUED)
LCD DISPLAY
6
7
1
2
3
8
9
4
5
1. REPEAT 1 (
)/ALL (
) Indicator
2. Track/Time Display
3. PRG (Program) Indicator
4. SHUFF (Shuffle) Indicator
5. INTRO Indicator
6. Hold ( ) Indicator
7. Battery Low ( ) Indicator
8. EQ (Equalizer) Indicators
9. ANTI-SHOCK Indicator
7
POWER SOURCES
This CD player requires either two (2) “AA” batteries (not included) or an AC
adapter (not included).
BATTERY INSTALLATION
The Battery indicator (
need replacing.
) will appear in the CD display when the batteries
1. Open the Battery Compartment door by
pressing in on the tab and then lifting it. To
prevent the possibility of losing the cover, it
cannot be removed.
+
–
2. Insert two (2) “AA” batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are
recommended for the longest playing time.
–
+
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included)
to an AC outlet having 120V, 60Hz AC only. Plug the small end into the
DC4.5V
jack on the side of the unit and connect the other end into
z
the AC outlet. The batteries are automatically disconnected when the AC
adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the
wall outlet by pulling the plug (not the cord). Do not touch the AC adapter
with wet hands. Fully insert the plug without exposing any part of the blade.
8
OPERATION
TO INSERT AND PLAY A CD
1
2
Open the CD compartment door by
sliding the CD Door OPEN switch.
Press the POWER ON/PLAY/
PAUSE ®p button to turn on the
unit and begin playback on Track 1.
Insert a disc onto the center spindle
(label side up) and push down gently to
make sure it is securely on the spindle.
Close the CD compartment door.
Insert the headphones into the
PHONES jack.
3
4
2
1
Adjust the VOLUME control To skip forward or backward through
as desired.
the tracks on the disc, press and
release the SKIP/SEARCH o 1 or
n 2 button.
To search forward or backward
through the disc, press and hold the
SKIP/SEARCH o 1 or n 2 button.
CONTINUED ON THE NEXT PAGE
9
OPERATION (CONTINUED)
5
6
When the disc is through playing, it
will stop. Press the POWER
OFF/STOP X button to stop the disc
before it is finished.
Press the POWER OFF/STOP X
button again while in the Stop mode
to turn the unit off or wait approx. 60
seconds and the unit will
automatically turn off (Auto
Power Off).
HOLD SWITCH
TO PAUSE PLAYBACK
1
1
To prevent accidentally pressing a
button while walking, etc., slide the
HOLD switch to the ON position;
Press the POWER ON/PLAY/
PAUSE ®p button to pause
playback; the display will blink. Press
the POWER ON/PLAY/PAUSE ®p
button to continue playback; the
display will stop blinking and
playback will continue.
the Hold indicator (
) will appear
in the display. When you want to
use these buttons again, slide the
HOLD switch back to the OFF
position.
PLEASE SEE NOTES ON THE NEXT PAGE
10
OPERATION (CONTINUED)
CD PLAYBACK NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “disc” will
appear in the display.
• As each track is played, the track number and elapsed time are shown in
the display.
• To remove the disc, open the CD compartment, hold the edge of the CD and
gently press the center spindle and lift the CD.
• “OPEN” will appear in the display when the CD Compartment door is open.
• Although this unit can read CD-R and CD-RW discs, in addition to normal CDs,
the playability of those discs may be affected by the type of software that was used
to create the discs, as well as the blank media you are using. 100% playability
cannot be guaranteed. This is not an indication of a problem with this unit.
ANTI-SHOCK SYSTEM
This CD player has a built-in anti-shock system that cuts down on CD skipping,
which is useful when using the CD player in the car or while jogging/walking.
When the unit is turned on, the anti-shock system will start automatically, the
sound will mute for just a moment and the display will show the blinking ANTI-
SHOCK indicator. Within a few seconds, the ANTI-SHOCK indicator will fill to
indicate music signals are stored memory.
To turn the anti-shock system off, press the ASP button. To turn the anti-shock
system on again, press the ASP button again.
NOTES:
• When the CD player is used in a stable location, turn the anti-shock system off
by pressing the ASP button. When the anti-shock system is OFF, battery
consumption is less.
• The anti-shock system provides for continuous sound output when the unit is
subject to vibration, but it will not correct errors, such as a defective or dirty CD.
11
OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
2
1
2
1
While in CD Stop mode, press the
MODE button once; the Repeat
One indicator “
the display.
Press the SKIP/SEARCH o 1 or n
2 button to select a track and press
” will appear in
the POWER ON/PLAY/PAUSE ®p
button „ to start playback. The unit
will play the selected track over and
over until the POWER OFF/STOP
I
button 4 is pressed.
TO REPEATEDLY PLAY BACK ALL TRACKS
1
2
1
2
While in CD Stop mode, press the Press the POWER ON/PLAY/
MODE button twice; the Repeat All
indicator “
display.
PAUSE ®p button 1 to start
playback and the unit will then play
all the tracks on the CD over and
” will appear in the
over until the POWER OFF/STOP
I
button 2 is pressed.
TO CANCEL OR STOP REPEAT PLAYBACK:
•
TO STOP REPEAT PLAYBACK, press the POWER OFF/STOP
I
button once.
•
TO CANCEL REPEAT PLAYBACK, press the MODE button until no
indicators appear in the display; normal playback will continue.
12
OPERATION (CONTINUED)
INTRO PLAY
1
2
1
While in CD Stop mode, press the Press the POWER ON/PLAY/
MODE button three times; the
INTRO indicator will appear in
the display.
PAUSE ®p button 1 to start
playback and the unit will then play
the first 10 seconds of each track
until the POWER OFF/STOP
I
button 2 is pressed.
TO RANDOMLY PLAY BACK A CD
1
2
1
2
While in CD Stop mode, press the Press the POWER ON/PLAY/
MODE button four times; the
SHUFF indicator will appear in
the display.
PAUSE ®p button 1 to start
playback and the unit will then play
all the tracks on the CD in random
order until the POWER OFF/STOP
button 2 is pressed.
I
TO CANCEL OR STOP INTRO OR RANDOM PLAYBACK:
•
TO STOP INTRO OR RANDOM PLAYBACK, press the POWER
OFF/STOP button once.
I
•
TO CANCEL INTRO OR RANDOM PLAYBACK, press the MODE button
until no indicators appear in the display; normal playback will continue.
13
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1
2
2
1
3
While in CD Stop mode, press the Select the first track to be played
PROG. button; the track number and
PRG indicator will blink in
the display.
back using the SKIP/SEARCH o 1
or n 2 button, then press the
PROG. button „ again. Repeat this
step to program additional tracks
(up to 20 tracks).
3
4
2
1
1
Press the POWER ON/PLAY/ To skip forward or backward
through the programs, press the
SKIP/SEARCH o 1 or n 2 button.
When the disc is through playing, it
will stop.
PAUSE ®p button 1 to begin
Programmed playback; the PRG
indicator will appear. Adjust the
VOLUME control ƒ as desired.
NOTES:
•
•
•
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
Each track may be stored in the program memory as many times as
desired up to 20 tracks.
Press the POWER OFF/STOP
finished.
button to stop the disc before it is
I
To clear the memorized program, press the POWER OFF/STOP button
I
again while in the Stop mode, wait approx. 60 seconds and the unit will
turn off or open the CD compartment.
14
OPERATION (CONTINUED)
TM
Barbie has a surprise just for you!
See what you
can do with
your GEMSTONE
FUN button!
Just follow the instructions below and
see what you can do with your
GEMSTONE FUN button!
Step 1
< Pop
< Rock
< SRR (Surround)
Press the GEMSTONE FUN button SURPRISE! Your GEMSTONE FUN
on your CD player. button is really secret EQ
a
(Equalizer) button. You can now set
your CD player to: Pop, Rock,
Surround or Normal.
15
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the compact
disc only by its edges. Never allow your fingers to
come in contact with the shiny, unprinted side of the
compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to the
compact disc label.
Clean the compact disc periodically with a soft, lint-
free, dry cloth. Never use detergents or abrasive cleaners to clean the compact
disc. If necessary, use a CD cleaning kit.
If a disc skips or gets stuck on a section of the compact disc, it is probably dirty or
damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular motions.
•
•
•
This unit is designed to play only compact discs bearing the
identification logo as shown here. Other discs may not conform to
the CD standard and may not play properly.
•
•
Compact Discs should be stored in their cases after each use to
avoid damage.
Do not expose compact discs to direct sunlight, high humidity, high temperatures or
dust, etc. Prolonged exposure or extreme temperatures can warp the compact
disc.
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink, may damage the surface.
•
Cleaning the Unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC adapter when
cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
16
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below
before calling for service.
SYMPTOM
Unit will not
turn on.
CAUSE
Weak or dead
batteries.
SOLUTION
Replace batteries.
Batteries not
inserted correctly.
AC adapter
Insert correctly.
Check AC adapter
connection.
not connected.
Disc will not play. CD compartment
not closed.
Close CD compartment.
Disc inserted incorrectly.
Reinsert disc correctly.
HOLD switch is set to ON. Slide HOLD switch to OFF.
Dirty or defective
disc.
Try another disc.
Moisture
Wipe disc with soft
cloth.
condensation
on disc.
No sound from
headphones.
Headphone plug not
inserted correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
Increase volume.
Replace batteries.
Try another disc.
Erratic playback. Dirty or defective disc.
Clean or replace disc.
17
EMERSON RADIO CORP.
LIMITED WARRANTY (Valid in the United States)
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of ninety
(90) days from the date of original purchase in the U.S. With your dated proof of purchase,
we will provide repair service at no charge for labor and parts at an authorized Depot
Repair Facility, or replace the product in our discretion. For repair or replacement, pack
your unit in a padded box, enclose your check or money order payable to Emerson Radio
Corp. in the amount of $9.00 (not required by California residents) to cover shipping and
handling costs, and enclose a copy of your proof of purchase. Send your unit to:
Emerson Radio Corp.
5101 Statesman Drive
Irving, TX 75063
This warranty does not cover damage from negligence, misuse, abuse, accident, failure to
follow operating instructions, commercial use, rental, repairs by an unauthorized facility, or
products purchased, used, serviced or damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAYALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
The serial number of your system is located on a label on the bottom cabinet. Please take
a moment now to locate the serial number and write the number in the space provided
below. You may be asked to provide this number when calling for product service.
Model Number:
Serial Number:
BAR100
__________________________________________
18
EMERSON® WARRANTY (Valid in Canada)
Consumer Electronics, Home Appliances and Home Office Products
Thank you for choosing EMERSON®
!
SYNNEX Canada Limited gives the following express warranty to the original consumer purchaser or gift recipient for this
EMERSON product, when shipped in its original container and sold or distributed in Canada by SYNNEX Canada Limited
or by an Authorized EMERSON Dealer:
SYNNEX Canada Limited warrants that this product is free, under normal use and maintenance, from any defects in
material and workmanship. If any such defects should be found in this product within the applicable warranty period,
SYNNEX Canada Limited shall, at its option, repair or replace the product as specified herein. Replacement parts
furnished in connection with this warranty shall be warranted for a period equal to the unexpired portion of the original
equipment warranty.
This warranty shall not apply to:
a. Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper
installation or inappropriate use as outlined in the owner’s manual.
b. Any EMERSON product tampered with, modified, adjusted or repaired by any party other than SYNNEX Canada
Limited or EMERSON’s Authorized Service Centres.
c. Damage caused or repairs required as a result of the use with items not specified or approved by SYNNEX
Canada Limited, including but not limited to head cleaning tapes and chemical cleaning agents.
d. Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the
product including but not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus,
trays, filters, cables, paper, cabinet, cabinet parts, knobs, buttons, baskets, stands, shelves, cookware and
cooking utensils.
e. Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
f. Any damage caused by external or environmental conditions, including but not limited to transmission line/power
line voltage or liquid spillage.
g. Any product received without appropriate model, serial number and CSA /cUL /cULus /cETL /cETLus markings.
h. Any products used for rental or commercial purposes.
i. Any installation, setup and/or programming charges.
Should this EMERSON product fail to operate during the warranty period, warranty service may be obtained upon delivery
of the EMERSON product together with proof of purchase and a copy of this LIMITED WARRANTY statement to an
Authorized EMERSON Service Centre. This warranty constitutes the entire express warranty granted by SYNNEX
Canada Limited and no other dealer, service centre or their agent or employee is authorized to extend, enlarge or transfer
this warranty on behalf of SYNNEX Canada Limited. To the extent the law permits, SYNNEX Canada Limited disclaims
any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss
of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of time
or use of this EMERSON product or the loss of information. The purchaser will be responsible for any removal,
reinstallation, transportation and insurance costs incurred. Correction of defects, in the manner and period of time
described herein, constitute complete fulfillment of all obligations and responsibilities of SYNNEX Canada Limited to the
purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract,
negligence, strict liability or otherwise.
CARRY-IN PARTS & LABOUR WARRANTY PERIODS:
•
•
Audio Products: 1 Year (Remote Control, if applicable – 90 Days)
Home Appliances: 1 Year
o
Microwave Magnetron parts only additional 3 Years
Refrigerator / Freezer Compressor parts only, additional 4 years
o
•
Home Office Products: 1 Year
To obtain the name and address of the nearest Authorized EMERSON Service Centre or for more information on this warranty
-
-
mail your inquiry to: SYNNEX Canada Limited, EMERSON Customer Service
200 Ronson Drive, Toronto, ON M9W 5Z9; or
-
call toll free 1-800-663-5954, Monday to Friday 9:00am – 5:00pm Eastern Standard Time.
08.2007
19
®
BAR100-081207-03
Printed in China
|