MicroNet Technology Switch SP624R User Manual

Quick Installation Guide  
EtherFast 10/100M Switch  
Model No.: SP624R  
 
Features  
y
Compliant with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX  
and IEEE802.3x flow control  
y
Support auto-negotiation function to automatically select optimal  
speed (10/100M) and mode (Full/Half Duplex)  
Support auto uplink, no more cross-over cable  
Support 802.3x flow control for full-duplex mode and  
back-pressure flow control for half-duplex mode  
Forward and filter packets at non-blocking, full wire speed  
Standard 19” rack-mount size  
y
y
y
y
y
100 - 240V AC, universal internal power supply  
2
 
Physical Description  
SP624R front view  
Please refer to the following table for LED definition.  
LED  
Status  
On  
Operation  
POWER  
Power is on.  
Off  
Power is off.  
On/Green  
Connection established.  
LNK/ACT  
Blink/Green  
Off  
Transmitting or receiving data.  
No link.  
3
 
Installation  
y Rack Mounting  
The switch can be mounted in an EIA standard 19-inch rack,  
which can be placed in a wiring closet with other equipment.  
Attach the mounting brackets at the switch’s front panel (one on  
each side), and secure them with the provided screws. Then, use  
screws provided with the equipment rack to mount each switch in  
the rack.  
y Connecting your network  
The switch provides up to 24 ports for 10/100BaseTX. Just  
connect each station to the switch by twisted-pair cable. Plug one  
RJ-45 connector into a RJ-45 port of the switch, and plug the  
other RJ-45 connector into the station’s network adapter. Power  
on the switch and then system is ready.  
In making a switch interconnection, you could use any port to  
connect another switch with straight or crossover cable.  
For cable selection, refer to the following table  
Network  
Speed  
Connector  
Cable Type  
Max.  
Length  
100 m  
10BaseT  
RJ-45  
Cat. 3, 4, 5  
UTP/STP  
100BaseTX  
RJ-45  
Cat. 5 UTP/STP  
100 m  
Note: To prevent costly equipment damage and downtime, please  
consider installing a surge suppression device or a UPS  
(Un-interrupted Power Supply).  
4
 
Specifications  
IEEE802.3, IEEE802.3u, IEEE802.3x,  
compliant  
Standard  
Interface  
24 * 10/100M RJ-45 ports  
10BASE-T: Cat. 3, 4, 5 UTP/STP  
100BASE-TX: Cat. 5 UTP/STP  
10M(Half duplex)/20M(Full duplex)  
100M(Half duplex)/200M(Full duplex)  
Auto Uplink (Auto MDI / MDI-X)  
4.8Gbps  
Cable Connections  
Data Transfer Rate  
Uplink  
Switch Fabric  
Filtering/Forwarding  
Rate  
10Mbps: 14,880pps/14,880pps  
100Mbps: 148,800pps/148,800pps  
FCC, CE  
Emission  
Operating Temperature 0 o - 40 o C (32 o - 104o F)  
Operating Humidity  
Dimension & Weight  
10% - 90% (Non-condensing)  
441 × 130 × 44 mm  
100 ~ 240V AC, 50/60Hz  
Full range internal power supply  
Power Supply  
5
 
CE Mark Warning  
This equipment complies with the requirements relating to  
electromagnetic compatibility, the essential protection requirement  
of Council Directive 89/336/EEC on the approximation of the laws of  
the Member States relating to electromagnetic compatibility.  
Company has an on-going policy of upgrading its products and it  
may be possible that information in this document is not up-to-date.  
Please check with your local distributors for the latest information.  
No part of this document can be copied or reproduced in any form  
without written consent from the company.  
Trademarks:  
All trade names and trademarks are the properties of their  
respective companies.  
Copyright © 2005, All Rights Reserved  
P/N: 2300-0355  
6
 

Lennox Hearth Furnace G60UHVX User Manual
LG Electronics Cell Phone AX565 User Manual
Lincoln Electric Welder SVM175 A User Manual
LST Smoke Alarm 2251TEM User Manual
Makita Grinder 9501BKLT User Manual
Manitowoc Ice Ice Maker K00347 User Manual
Meade Binoculars DB1 User Manual
Melissa Waffle Iron 743 139 User Manual
Meyer Sound Speaker MJF 212A User Manual
MicroBoards Technology Label Maker PF Pro Disc Printer User Manual