Memorex MP3 Player MPD8860 User Manual

MPD8860  
User’s Guide  
Personal AM/FM Stereo  
Compact Disc MP3 Player  
Before operating this product,  
please read these instructions completely.  
 
SAFETY PRECAUTIONS (CONTINUED)  
INFORMATION:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the fol-  
lowing measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
• Do not open the CD compartment while the CD is rotating.  
• Always keep the CD compartment closed when not in use.  
• Keep all foreign objects out of the CD compartment.  
• Place the unit on a stable surface.  
• Avoid installing the unit in locations described below:  
• Places exposed to direct sunlight or close to heat radiating  
appliances such as electric heaters.  
• On top of other stereo equipment that radiates too much  
heat.  
• Placed lacking ventilation or dusty places.  
• Places subject to constant vibration.  
• Humid or moist places.  
2
 
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of  
your musical enjoyment. Now it’s time to consider how you can maximize the fun and  
excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your equipment  
by playing it at a safe level. One that lets the sound come through loud and clear without  
annoying blaring or distortion and, most importantly, without affecting your sensitive  
hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s Consumer Electronics Group recommend you  
avoid prolonged exposure to excessive noise. This list of sound levels is included for your  
protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT  
EXPOSURE:  
We  
WantYou  
LISTENING  
ForALifetime  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
EIA  
Rocket launching pad  
EST. 1924  
Information courtesy of the Deafness Research Foundation.  
3
 
LOCATION OF CONTROLS  
1
2
13  
14  
15  
16  
17  
18  
3
4
5
6
7
8
19  
20  
9
10  
11  
21  
22  
12  
1. DC 4.5V Jack (Rear of Unit)  
13. HOLD (ON/OFF) Switch  
14. PROG (Program) Button  
15. Skip/TUNING n Button  
z
2. Display  
16. PLAY/PAUSE (®p) /POWER  
3. RESUME/® Button  
4. MODE/Button  
5. PRESET UP L Button  
6. PRESET DOWN M Button  
7. ENTER/CLEAR Button  
8. MENU/ESP/BAND Button  
ON Button  
17. Skip/TUNING o Button  
18. STOP (I)/POWER OFF  
Button  
19. LINE OUT Jack (Side of Unit)  
20. PHONES (Headphones) Jack  
(Side of Unit)  
9. Battery Compartment (Under  
CD Compartment)  
21. VOLUME Control  
10. CD Compartment  
22. DBBS (Bass Boost) Switch  
11. FUNCTION (CD/RADIO)  
Switch  
12. CD Door Open Switch  
4
 
POWER SOURCES  
This CD player requires either two (2) “AA” cell batteries (not included) or  
an AC adapter (not included).  
BATTERY INSTALLATION  
“Low Battery” will appear in the CD display when the batteries need  
replacing.  
1. Open the CD compartment, then open the  
battery compartment door by pressing in on  
the tab and then lifting it. To prevent the  
possibility of losing the cover, it cannot  
be removed.  
2. Insert two (2) “AA” cell batteries (not  
included) according to the polarity diagram  
inside the battery compartment. Alkaline  
batteries are recommended for the longest  
playing time.  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery  
compartment. Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or Rechargeable) or old  
batteries with fresh ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.  
(Follow battery manufacturer’s directions.)  
AC OPERATION  
To operate the unit using AC power, connect an AC adapter (not included) to  
an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC  
4.5V jack on the rear of the unit and connect the other end into the AC outlet.  
The batteries are automatically disconnected when the AC adapter is used.  
CAUTION: When not using AC power, disconnect the AC adapter from  
the wall outlet by pulling the plug (not the cord). Do not touch the AC  
adapter with wet hands. Fully insert the plug without exposing any part of  
the blade.  
DC4.5V  
z
5
 
OPERATION  
TURNING POWER ON/OFF  
BASS BOOST  
1
1
1
2
To turn the unit on, press the  
PLAY/PAUSE (®p)/POWER ON button  
.  
To turn the unit off, Press the STOP (I)  
/POWER OFF button ƒ while in the Stop  
mode.  
To emphasize the bass, slide the  
DBBS switch to the ON position. For  
normal bass, slide the DBBS switch to  
the OFF position.  
HOLD  
1
Slide to the ON position to disable the buttons; “Hold” will briefly appear in the  
display. When pressing the buttons on the CD compartment lid, "Hold" will briefly  
appear in the display. Slide to the OFF position to enable the buttons. For the HOLD  
function, only the buttons on the CD compartment lid will be disabled, not the other  
controls/switches.  
AUTO POWER OFF  
When the unit is stopped (Standby mode) for approximately one minute, the  
power will automatically turn off.  
Radio Sound Through a Home Audio System  
By using a home audio connection cable (not included), superb radio sound can  
be heard through your home audio system. Before making any connections, turn  
off the power to all equipment.  
Plug a connection cable (not included) between the LINE OUT jack on the rear  
of the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to  
the amplifier’s PHONO jack.)  
NOTE: If the radio interferes with TV reception, move the unit away from the TV  
or turn off the power to this unit.  
6
 
RADIO OPERATION  
TO LISTEN TO THE RADIO  
1
2
3
2
2
1
1
Slide the FUNCTION switch 1 to the RADIO  
position. Press the MENU/ESP/BAND  
button 2 to select a band (AM or FM). If  
listening to FM, press the MODE/button  
3 to select Stereo or Mono.  
Set the VOLUME control 1 to minimum  
and plug the headphones into the  
PHONES jack. Press the PLAY/PAUSE  
(®p)/POWER ON button 2 to turn the  
unit on.  
3
4
3
1
2
1
2
Press and release the Skip/TUNING o Adjust the VOLUME control 1 and DBBS  
1 or n 2 button to tune a station. Press  
and hold the Skip/TUNING o 1 or n 2  
button for rapid search tuning.  
switch 2 as desired. If FM STEREO  
reception is weak/noisy, press the  
MODE/button 3 to select Mono, in this  
case the reception will be monaural.  
ANTENNAS  
5
AM–This unit has a built-in ferrite bar  
antenna, which provides adequate reception  
in most areas. If reception is weak, turn the  
unit to improve reception.  
FM–The headphones act as an antenna for  
FM. Extend the headphone wire for best FM  
reception.  
To turn the radio off, press the STOP  
(I)/POWER OFF button.  
AUTO SCAN  
Press and hold the Skip/TUNING o or n  
button for approximately 1 second and the  
unit will automatically search for the next  
available station.  
7
 
RADIO OPERATION (CONTINUED)  
TO SET AND RECEIVE A STATION INTO MEMORY  
1
2
3
1
2
Tune a desired station as described in Within ten seconds, select the desired  
the previous section. Press the PROG  
button; the preset number will blink.  
preset using the PRESET UP L 1 or  
DOWN M 2 button. Press the PROG  
button 3 to confirm.  
3
1
2
To receive a preset station, simply press  
the PRESET UP L 1 or DOWN M 2  
button to select the desired preset.  
8
 
CD OPERATION  
TO INSERT AND PLAY A CD  
This CD player is designed to play all kinds of Audio Discs and MP3 CD  
Roms, such as CD recordables and rewritables. Do not try to play CDI,  
CDV, DVD or computer CDs in this unit.  
1
2
2
1
Open the CD compartment lid by  
Press the PLAY/PAUSE (®p)/POWER  
sliding the CD OPEN switch 1 to the ON button to begin playback; the  
current track and elapsed playing time  
(CD information and folder will also  
appear, if using MP3) will appear in the  
display.  
right. Gently press a disc, label side  
up, onto the spindle until it locks in  
place. Close the CD compartment lid.  
Insert headphones into the PHONES  
jack. Slide the FUNCTION switch 2 to  
the CD position.  
3
4
1
2
When the disc is through playing, it will  
stop. Press the STOP (I)/POWER  
OFF button to stop the disc before it is  
finished. Press the STOP (I)/POWER  
OFF button again to turn the unit off.  
Adjust the VOLUME control 1 and  
DBBS switch 2 as desired.  
9
 
CD OPERATION (CONTINUED)  
CD PLAYBACK NOTES:  
• See page 17 for more information on MP3’s.  
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply  
record “burn” only one session. You can find more information in your recorder’s  
manual.  
• This unit is capable of playing standard CDs or 3” singles; no adapter is  
required.  
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “No Disc”  
will appear in the display.  
• If a disc is not recorded properly, a disc error will occur and “Invalid Disc” will  
appear in the display.  
• Playback will stop when you open the CD compartment, but it is not  
recommended to open the compartment before the STOP (I)/POWER OFF  
button is pressed.  
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.  
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin  
playback, depending on the number of tracks burned on the CD.  
TO PAUSE A CD  
2
1
During CD playback, if you wish to  
pause the disc momentarily, press the  
Press the PLAY/PAUSE (®p)  
/POWER ON button again to release  
PLAY/PAUSE (®p)/POWER ON but- pause and resume playback. The  
ton. Playback stops but the disc con- sound returns, “PAUSE” will disappear  
tinues to spin, the elapsed time will and the elapsed time in the display  
blink and “PAUSE” will appear in the stops blinking.  
display.  
10  
 
CD OPERATION (CONTINUED)  
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK  
1
2
1
2
After you insert the disc into the CD When the desired track number (and  
player and the total number of tracks file number if using MP3) appears in  
appear in the display, you may press the display, press the PLAY/PAUSE  
either the Skip/TUNING o 1 or n 2 (®p)/POWER ON button. Playback will  
begin with the track (or file) you select-  
ed.  
button to select a specific track for  
playback.  
FORWARD/REVERSE SKIP TRACK  
1
2
During playback, press and release During playback, press and release the  
the Skip/TUNING n button once to Skip/TUNING o button once to move  
advance the player to the beginning of the player back to the beginning of the  
the  
next  
track.  
Press  
the currently playing track. Press the  
Skip/TUNING n button repeatedly to Skip/TUNING o button repeatedly to  
move the player back to lower-num-  
bered tracks.  
advance the player to higher-num-  
bered tracks.  
11  
 
CD OPERATION (CONTINUED)  
HIGH-SPEED MUSIC SEARCH  
During playback, depress and hold  
either the Skip/TUNING o 1 or n 2  
button to move the player forward or  
backward within a track to locate a  
specific musical passage. The player will  
move forward or backward at high  
speed as long as the buttons are  
depressed. When you release the  
Skip/TUNING o 1 or n 2 button,  
normal playback will resume.  
1
1
2
REPEAT PLAYBACK OF ONE TRACK  
1
2
2
3
To repeat a single track, while in the When the desired track number  
Stop mode, press the MODE/button appears in the display, press the  
1 once; “REP 1” will appear in the  
display. Press the Skip/TUNING o 2  
or n 3 button to select the specific  
track that you wish to repeat.  
PLAY/PAUSE (®p)/POWER ON but-  
ton to begin playback. The "REP 1"  
indicator will disappear from the display  
after a few seconds and the specific  
track you selected will be repeated con-  
tinuously.  
TO CANCEL REPEAT PLAYBACK OF ONE TRACK:  
1. Press the STOP (I)/POWER OFF button to stop playback, the "REP 1"  
indicator will appear again, press the MODE/button repeatedly until the  
MODE indicators disappear from the display.  
2. Press the MODE/button once, the “REP A” indicator will appear in the  
display. Press the MODE/button repeatedly until the Mode indicators  
disappear from the display to return to normal playback.  
12  
 
CD OPERATION (CONTINUED)  
REPEAT PLAYBACK OF ALL TRACKS  
1
2
To repeat all the tracks on the CD,  
press the MODE/button twice;  
“REP A” will appear in the display.  
Press the PLAY/PAUSE (®p)/POWER  
ON button to begin playback. The "REP  
A" indicator will disappear from the dis-  
play after a few seconds and all tracks  
on the disc will be repeated  
continuously.  
REPEAT PLAYBACK OF A FOLDER (MP3 w/folders only)  
1
2
2
3
To repeat all files in a directory (MP3  
CD only), press the MODE/button  
1 three times; “REP D” will appear in  
the display. Press the Skip/TUNING o  
2 or n 3 button to select the specific  
directory that you wish to repeat.  
Press the PLAY/PAUSE (®p)/POWER  
ON button to begin playback. The "REP  
D" indicator will disappear from the display  
after a few seconds and all files in the  
selected directory will be repeated contin-  
uously.  
TO CANCEL REPEAT PLAYBACK:  
1. Press the STOP (I)/POWER OFF button to stop playback, the "REP A" or  
“REP D” indicator will appear again, press the MODE/button repeatedly  
until the MODE indicators disappear from the display.  
2. Press the MODE/button once, the “REP D” or “INTRO” indicator will appear  
in the display. Press the MODE/button repeatedly until the Mode indicators  
disappear from the display to return to normal playback.  
13  
 
CD OPERATION (CONTINUED)  
INTRO PLAYBACK (Will play the first 10 seconds of each track)  
1
2
While in the Stop mode, press the  
MODE/button 3 times (4 times if an  
MP3 CD with multiple directories is  
inserted); “INTRO” will appear in the  
display.  
Press the PLAY/PAUSE (®p)/POWER  
ON button to begin Intro playback. The  
"INTRO" indicator will disappear from  
the display after a few seconds and the  
first 10 seconds of all tracks on the disc  
will be played in sequence.  
TO RANDOMLY PLAY BACK A CD  
1
2
While in the Stop mode, press the  
MODE/button 4 times (5 times if an  
MP3 CD with multiple directories is  
inserted); “RANDOM” will appear in  
the display.  
Press the PLAY/PAUSE (®p)/POWER  
ON button to begin playback. The  
"RANDOM" indicator will disappear from  
the display after a few seconds and the  
unit will play all the tracks in random order.  
When all the tracks have been played, the  
unit will stop.  
TO CANCEL INTRO OR RANDOM PLAYBACK:  
1. Press the STOP (I)/POWER OFF button to stop playback, the selected  
indicator will appear again, press the MODE/button repeatedly until the  
MODE indicators disappear from the display.  
2. If in INTRO mode, press the MODE/button once, the “RANDOM” indicator  
will appear in the display. Press the MODE/button until the Mode indicators  
disappear from the display to return to normal playback. In Random mode,  
press the MODE/button once to return to normal playback.  
14  
 
CD OPERATION (CONTINUED)  
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)  
Programming is the ability to preselect the order in which a series of tracks will be  
played.  
1
2
1
2
While in the Stop mode, press the PROG Select a track to be programmed using the  
button. The track number will blink and  
“P-01” will appear in the display.  
Skip/TUNING o 1 or n 2 button. If using  
a MP3 disc, see note below.  
3
4
Press the PROG button to memorize  
the track. Repeat steps 2 and 3 to  
program additional tracks up to a  
maximum of 24 tracks.  
Press the PLAY/PAUSE (®p)/POWER  
ON button to begin program playback.  
NOTES:  
While in the Stop mode and “P” is in the display, press and hold the  
ENTER/CLEAR button for 2 seconds to clear the memory.  
MP3: If an MP3 CD is inserted, you will first select the directory number in  
step 1, press the PROG button and then enter the file/track number.  
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING  
THE MEMORY.  
15  
 
CD OPERATION (CONTINUED)  
NOTES ON PROGRAM PLAYBACK  
You can review the program by pressing the PROG button repeatedly  
while in the Stop mode.  
To add a track to the program memory, simply press the PROG button  
repeatedly until the track (directory if using an MP3) appears and “00”  
blinks in the display, then continue as per the steps 2 and 3 on the  
previous page.  
Press the STOP (I)/POWER OFF button to stop the program before it is  
finished (the program memory will be kept).  
Each file may be stored in the program memory as many times as desired  
(up to 24 files).  
You can scroll through the program while it is playing using the  
Skip/TUNING o or n button.  
ESP (ELECTRONIC SKIP PROTECTION)  
This feature protects against loss of sound caused by vibrations and shocks.  
Continuous playback is ensured once some of the music has been stored  
into memory.  
ESP will automatically be activated when listening to standard or MP3 CDs.  
You cannot deactivate ESP while listening to an MP3 CD. However, you can  
deactivate it when playing a standard CD by simply pressing the  
MENU/ESP/BAND button; the ESP indicator will disappear from the display.  
Deactivating the ESP will conserve battery life.  
RESUME  
This unit has Auto resume, which will resume playback of the previous track  
when the unit is turned on (and the same CD is still in the CD compartment).  
The RESUME/® button will allow you to resume playback of a CD that was  
previously stopped. If you stopped a CD in the middle of playing, simply  
press the RESUME/® button and the CD will continue at the beginning of the  
previously stopped track.  
16  
 
CD OPERATION (CONTINUED)  
MP3 FAQs–Frequently Asked Questions  
Please read before playing an MP3 CD.  
Does the unit support packet write CD-RW?  
Yes, it can. You can add or delete MP3 files without  
reformatting. It appears like a PC hard drive.  
Can the unit read regular music CDs?  
Yes, it can. However you can not mix MP3s and WAV files on  
the same CD. If you do this your Portable MP3 CD Player will  
play only the MP3 files.  
Does the unit have Electronic Skip Protection built-in?  
Yes, it has an anti-shock buffer (45 seconds for standard CD  
and 120 seconds for MP3 CD). What it means for the  
everyday user is that it can withstand road bumps, shaking,  
etc. There will be no skipping when you jog or run on a tread-  
mill or drive on a bumpy road.  
Can I use the MP3 extension for non-audio data files?  
No, this may result in serious malfunction and harmful noise  
interference.  
Can I mix MP3 files with other file types on the CDR?  
Yes, but your Portable MP3 CD Player will ignore those files  
and read only the MP3 files on the CDR.  
Does the unit support multi-session CDRs?  
If the MP3 CD is not finalized, you can burn a new group of  
MP3 files until the CD is full.  
Does the unit support subdirectories (subfolders)?  
Yes, the unit can read MP3 files from subfolders.  
What appears on the display when playing back MP3 CDs?  
The album, title and artist (if set when MP3 was recorded).  
17  
 
CD OPERATION (CONTINUED)  
SELECTING SONGS BY MP3 TITLE  
You can search for a song by title as follows:  
1
2
2
4
With an MP3 disc inserted, press the Select the first letter of a file you would  
MENU/ESP/BAND button; the alpha-  
bet will appear in the display.  
like to listen to using the MODE/√  
1
and/or RESUME/® 2 buttons. Press  
the PRESET DOWN M button 3 to  
access the lower letters or PRESET  
UP L button 4 to access the higher  
letters.  
3
4
3
When the desired file appears, press  
the ENTER/CLEAR button and the file  
will automatically start playing.  
Press the ENTER/CLEAR button 1  
and a list of files starting with the  
selected letter will appear. Press the  
MODE/2 and/or RESUME/® 3  
buttons to scroll through the list.  
NOTE:  
If you select a letter that does not contain any files, “No File” will appear  
in the display.  
18  
 
CD OPERATION (CONTINUED)  
SEARCHING THROUGH MP3 DIRECTORIES  
You can search the contents of the directories (if burned on CD) as  
follows:  
1
2
2
Press the MENU/ESP/BAND button To select a file from the directory, use  
twice; the first directory will appear in  
the display, as well as its contents.  
the MODE/1 and/or RESUME/® 2  
buttons.  
3
4
1
2
If you would like to change directories, When the desired file appears, press  
the ENTER/CLEAR button and the file  
will automatically start playing.  
use the PRESET L 1 and/or M 2  
buttons.  
19  
 
CD OPERATION (CONTINUED)  
SINGLE SESSION  
The chart below is an example of a Windows Explorer display that will  
appear on your computer monitor for a single session MP3 CD ROM with  
directories/albums. Check the added notes to help you understand the  
MP3 CD unit display and the playback sequence of directories/albums  
and tracks on a single session MP3 CD.  
MULTI SESSION  
The computer user does not need to finalize the CDR disc as music is  
burned on the CD. Because of this, the music can be downloaded at  
different times until the whole CD is full.  
(E) CD-ROM drive  
Directory 01  
Skipped  
Blur01.mp3  
Blur02.mp3  
Blur03.mp3  
Blur04.mp3  
Blur.jpg  
Lyric.doc  
Directory 02  
Directory 04  
Spice05.mp3  
Spice06.mp3  
Girl09.mp3  
Girl10.mp3  
Directory 03  
Directory 05  
2men07.mp3  
2men08.mp3  
Boyz11.mp3  
Boyz12.mp3  
Skipped  
Directory 06  
Bread13.mp3  
Abba01.wav  
Abba02.wav  
Directory 07  
Marx14.mp3  
Twain15.mp3  
NOTES:  
The arrow pathway shows the sequence of MP3 directory and file  
playback.  
• This example has a total of seven MP3 directories.  
• Based on this layout, the first file will be “Blur01.mp3” and the last file  
will be “Twain15.mp3”.  
• “Skipped” denotes a directory which contains non-audio files only, e.g.  
jpg, wav, etc. These cannot be detected nor played on this player.  
When an album contains mixed format files, the non-MP3 files will be  
skipped.  
20  
 
CARE AND MAINTENANCE  
Caring for Compact Discs  
Treat the compact disc carefully. Handle the  
compact disc only by its edges. Never allow your  
fingers to come in contact with the shiny, unprinted  
side of the compact disc.  
Do not attach adhesive tape, stickers, etc. to  
the compact disc label.  
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use  
detergents or abrasive cleaners to clean the compact disc. If necessary, use a  
CD cleaning kit.  
If a compact disc skips or gets stuck on a section of the compact disc, it is  
probably dirty or damaged (scratched).  
Z
When cleaning the compact disc, wipe in straight lines from the center of the  
compact disc to the outer edge of the compact disc. Never wipe in circular  
motions.  
Compact discs should be stored in their cases after each use to avoid  
damage.  
Do not expose compact discs to direct sunlight, high humidity, high  
temperatures or dust, etc. Prolonged exposure or extreme temperatures can  
warp the compact disc.  
Do not stick or write anything on either side of the compact disc. Sharp writing  
instruments, or the ink, may damage the surface.  
Cleaning the Unit  
To prevent fire or shock hazard, disconnect your unit from the AC power  
source when cleaning.  
The finish on your unit may be cleaned with a dust cloth and cared for as other  
furniture. Use caution when cleaning and wiping the plastic parts.  
Mild soap and a dry cloth may be used on the front panel.  
21  
 
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
SYMPTOM  
Unit will not  
CAUSE  
SOLUTION  
Dead batteries, or not Replace batteries, and install  
turn on.  
installed properly.  
Weak or dead  
batteries.  
properly.  
Recharge batteries.  
AC adapter  
not connected.  
CD compartment  
not closed.  
Check AC adapter  
connection.  
Close CD compartment.  
Disc will not play.  
Disc inserted  
incorrectly.  
Dirty or defective  
disc.  
Reinsert disc correctly.  
Try another disc.  
Moisture  
condensation  
on disc.  
Wipe disc with soft  
cloth.  
Erratic CD playback.  
Dirty or defective  
disc.  
Clean or replace disc.  
No sound from  
headphones.  
Headphone  
plug not inserted  
correctly.  
Reinsert headphone  
plug correctly.  
VOLUME control  
set to minimum.  
Weak batteries.  
Defective disc.  
ESP is not activated.  
Station not tuned  
Increase volume.  
Replace batteries.  
Try another disc.  
Press the MENU/ESP/BAND button.  
Retune AM or FM  
ESP not working.  
Noise or sound  
distorted on radio.  
properly for AM or FM  
.
broadcast station.  
FM: Headphone wire  
not extended.  
Extend Headphone wire.  
AM: Unit is not  
Rotate unit until best  
reception is obtained.  
Retune station.  
Press MODE button to turn  
on Stereo.  
positioned correctly.  
Poor FM signal.  
MODE button  
FM STEREO indicator  
does not light.  
not set to Stereo.  
No sound.  
FUNCTION switch is not Set FUNCTION switch to the  
in the desired position. desired function.  
22  
 
SPECIFICATIONS  
Power Requirement DC............................2 x AA (LR6) Alkaline batteries  
Power Requirement AC .................DC IN 4.5 V adapter (Center positive)  
Output level (Line out) ..............................................0.6VMS (47K Ohms)  
Output level (Headphone) .............................................16mW (32 Ohms)  
MPEG Rate ............................................................................32-384Kbps  
Sampling Frequency ..................................8/11.025/12KHz for MPEG2.5  
16/22.05/24KHz for MPEG2  
32/44.1/48KHz for MPEG1  
MP3 Playback ................................................ISO9660 format compatible  
Frequency Range (FM) .......................................................87.5–108MHz  
Frequency Range (AM) .......................................................530–1720kHz  
Check the CD burner/recorder’s documentation to see if it complies with  
these specifications.  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE  
VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90  
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR  
PLACE OF PURCHASE OR MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT  
1-800-321-6993.  
23  
 
Memcorp, Inc.  
Weston, FL  
Printed in Hong Kong  
 

Learning Resources Games EI 8920 User Manual
Lennox Hearth Door TAPD35C User Manual
Lexmark All in One Printer X782 User Manual
LG Electronics Refrigerator LRSC21935 User Manual
Magnavox DVD Player H2080MW8 User Manual
Makita Drill 3006 User Manual
Maytag Microwave Oven MMV5156AA User Manual
Melissa Fryer 643 069 User Manual
Metra Electronics Car Stereo System GMOS 04 User Manual
Midland Radio Two Way Radio GXT 850 User Manual