L i v e n z a M i l k F r o t h e r
complies with
INTERNATIONAL
Model:
2 9 4 0 0
IEC60335
5 5 0 W
SAFETY SPECIFICATIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 y e a r g u a r a n t e e
MW_29400.indd
1
2013/01/16 01:59:53 PM
the appliance off once the froth has reached the
desired consistency.
5. You can use the appliance again once it has
cooled down (after about 5 minutes).
To heat and froth milk:
1. Pour the desired amount of fresh milk into the
jug (MAX 130ml) .
2. Close the lid.
3. Insert the plug into the wall socket. Press the
on/off button, the red pilot light will illuminate.
4. The milk will now begin to heat and froth, the
appliance will switch off automatically.
5. You can use the milk frother again once the
appliance has cooled down (after about 5
minutes).
Cleaning:
1. Always ensure that the appliance is unplugged
from the wall socket and that it has cooled down
completely before undertaking any cleaning
task.
2. After using the appliance, pour clean water and
some dish washing liquid into the jug and allow
it to stand for a few minutes, then rinse the ap-
pliance and wipe it with a clean dry cloth.
CAUTION:
* Do not immerse the appliance in water or any
other liquid.
* Do not use any abrasive cleaning agents, or any
sharp objects (such as knives or hard brushes)
when cleaning this appliance.
Environment:
When you are ready to dispose of the appliance,
remove the plug from the wall socket, and cut the
power cord. Keep the appliance and its parts out
of the reach of children. Deliver the appliance to an
approved collection point for small appliances.
MW_29400.indd
3
2013/01/16 01:59:54 PM
MW_29400.indd
4
2013/01/16 01:59:55 PM
|