Manitowoc Ice Ice Maker S1470C User Manual

KFC and Taco Bell Logo Application Instructions  
Manitowoc Models S600C, S1470C  
These instructions will help the location manager or machine installer to correctly center the urethane logo on the front panel of the  
Manitowoc ice machine.  
Tools Needed:  
Philips head screw driver  
Contents of Kit:  
Small packet containing alcohol prep pad  
Urethane logo  
L-shaped static cling template  
MODELS - SY1474C or SD1472C  
MODEL - SY0674C or SD0672C  
Follow these instructions to remove the ice machine front panel  
from the machine.  
Follow these instructions to remove the left section of the ice  
machine front panel from the machine.  
(1) If your machine is on a drink dispenser, remove the drink  
dispenser ice bin cover.  
(1) If your machine is on a drink dispenser, remove the drink  
dispenser ice bin cover.  
(2) Remove the Philips head screw from lower section of the  
front panel.  
(3) Depress pin to release front panel.  
(2) Remove the Philips head screw from lower section of the front  
panel.  
(3) Pull front panel away from machine while lifting slightly.  
Pictured: S600C  
Manitowoc Ice, Inc.  
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
000002851  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
Rev 01  
5/25/10  
 
8. When the semi-transparent masking and logo are in place,  
apply pressure against the top of the masking, working  
out any visible air bubbles. Remove the semi-transparent  
logo masking very slowly, allowing only the urethane  
logo to remain in the space within the template frame. As  
the semi-transparent masking is pulled back, make sure  
no stray pieces of urethane logo remain attached to  
the semi-transparent masking. If this occurs, slowly  
lower the masking and press firmly against it to make  
sure the remaining piece sticks to the stainless steel.  
9. Remove the template from the surface of the stainless  
steel front panel.  
10. Reattach the stainless steel front panel to the ice machine.  
11. If the machine is on a beverage dispenser, re-attach the  
drink dispenser ice bin cover.  
Manitowoc Ice, Inc.  
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
000002851  
Rev 01  
5/25/10  
 

KTM Motorcycle 125 EXC User Manual
La Crosse Technology Clock WT 9300 User Manual
Learning Resources Baby Toy LER 7351 User Manual
Lexicon Video Game Controller MC 1 User Manual
LG Electronics Air Conditioner W091CA User Manual
LG Electronics Computer Monitor 42PM1M User Manual
Lindy Switch 32890 User Manual
Lucent Technologies Telephone 108286063 User Manual
McIntosh Speaker System XLS360 User Manual
Midland Radio Two Way Radio LXT114 User Manual