Lyngdorf Audio Portable Speaker W 210 User Manual

Owner´s manual  
W210  
Manual version 07-08-2007  
 
Connecting  
When connecting the W210s, always connect ”+” and ”-” from the amplifier to the corresponding ”+”  
and ”-” terminals on the W210 input.  
Connect your speakers the same way to avoid phase errors.  
Set-up of cut-off frequency  
To match most speakers bass response, we recommend a cut-off frequency at 400Hz. But depending  
on you speakers and room, the cut-off frequency can easily vary from 200-800Hz. Try experimenting to  
get the best sound.  
Level  
Adjust the level of the W210s to match the sound level of your main speakers.  
If applying RoomPerfect you can set the volume of the W210s a few dB to loud before making the  
RoomPerfect calibration. RoomPerfect will then lower the bass to an appropriate level.  
Cleaning  
Please use a dust-free cloth to clean the speakers. It is also possible to use a slightly damp cloth for more  
stubborn marks.  
Under no circumstances should you use any kind of cleaning agent on, or in close proximity to, these  
speakers.  
Specifications  
Product  
W210  
2 x 10”  
Woofer/midrange driver  
Frequency response  
Sensitivity (2.83V/1m)  
Nominal Impedance  
16 - 3500 Hz  
96dB  
8 Ohm  
 
3
Technical Assistance  
For latest version of this document and ‘Questions and Answers’, please check the Lyngdorf Audio  
website.  
If you have any problems with or questions regarding your Lyngdorf Audio product, please contact  
your nearest Lyngdorf Audio representative or:  
Lyngdorf Audio ApS  
Denmark  
 

Krups Toaster FBB2 User Manual
Lexmark Photo Printer Z65P User Manual
LG Electronics CRT Television 50LA64 Z User Manual
LG Electronics Microwave Oven LTM9000B User Manual
Lochinvar Water Heater CW 0495 User Manual
LOREX Technology DVR DXR116 User Manual
LOREX Technology Security Camera DXR109 User Manual
Mamiya Camera Accessories RZ67 User Manual
Meridian America CD Player 808 User Manual
Midland Radio Two Way Radio LXT 300 Series User Manual