Life Fitness Treadmill TR91 95 97 User Manual

Life Fitness Model TR91/95/97 Series Treadmills  
How To… Install The Roller Guard Bracket Kit  
Tools required: Hex key wrench set, socket and ratchet set, drillbit set, drill, file,  
and Phillips screwdriver  
Kit # GK58-00002-0008  
1. Turn the unit power OFF at the ON/OFF switch, and then  
Rear Roller  
Welded Guard  
Tab  
unplug the line cord at the wall outlet.  
2. Remove the REAR ROLLER GUARDS.  
3. Remove tension bolts from REAR ROLLER.  
4. Remove the REAR ROLLER.  
5. Insert the Treadmill Model appropriate TEMPLATE into  
user left rear roller channel and mark hole locations on the  
FRAME. Flip the template and repeat for the user right  
rear roller channel.  
Rear  
Roller  
Tension  
Bolts  
6. Drill a 0.154 hole at each of the four marked locations.  
7. Install a GROMMET into each ROLLER GUARD  
BRACKET.  
8. Install each ROLLER GUARD BRACKET using two  
supplied short screws.  
Grommet  
Rear Roller  
Guards  
Note: It may be necessary to file down any weld material that  
would prevent the ROLLER GUARD BRACKET from being  
mounted flush to the frame.  
9. Re-install the REAR ROLLER. Using the supplied long  
screws, re-install the REAR ROLLER GUARDS making  
sure the striding belt is properly adjusted and tensioned.  
Refer to service manual “HOW TO…Replace Striding Belt”  
for proper belt adjustment and tensioning.  
Bracket  
Self-Tapping  
Screws  
M051-00K58-A026  
 

Lennox Hearth Stove H7638 User Manual
LG Electronics Drums LGENBOX 01 User Manual
Life Fitness Home Gym X9 User Manual
Linksys Network Router BEFSR81 User Manual
Linksys Stereo System KWHA700 User Manual
Marvel Industries Games 77237 77184 User Manual
M Audio Computer Hardware 1010LT User Manual
MB QUART Car Stereo System PSD 316 User Manual
Metz Camcorder 28 AF 4 C User Manual
Meyer Sound Stereo System MSPN 2703311201 User Manual