LST Smoke Alarm Series 65 XP95 User Manual

Detector Base Accesories  
Series 65/XP95  
• Detector base for flush mounting in  
false ceilings  
fig. C  
fig. A  
• Conduit box for surface mounting  
• Detector base backplate  
fig. D  
• Code cards for selection of the  
fig. B  
detector address  
• Detector mounting bracket  
fig. E  
fig. F  
Detector base for flush mounting (ADM technology)  
The detector base in flush mounting design (fig. A) ac- The detector address is selected by means of a code  
commodates automatic fire detectors Series XP95 and card in the detector base. Therefore the detector can  
Discovery for use in ADM loops with Apollo/Discovery be changed without additional tools. The package con-  
protocol. It is specially designed for mounting in false tents includes a cover plate.  
ceilings made of mineral fibre.  
Specifications  
Dimensions ø × H  
Colour  
150 × 15 (mm)  
white  
Weight  
70g  
Order number  
Order name  
246034  
Detector Base/Anal./XP95/Disc/Apo 45681-250  
Detector base for flush mounting (conventional technology)  
The detector base in flush mounting design (fig. B) ac- Individual detector addressing can be achieved by  
commodates automatic fire detectors in addressable connecting the optional Address Module NG60-1. The  
conventional technology. It is specially designed for package contents includes a cover plate.  
mounting in false ceilings made of mineral fibre.  
Specifications  
Dimensions ø × H  
Colour  
150 × 15 (mm)  
white  
Weight  
70g  
Order number  
Order name  
246035  
Detector Base/Conv./60/65/Apo 45681-251  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 1  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
 
Detector mounting bracket  
The Detector Mounting Bracket MMW1-1 (fig. F) is made floors, elevator shafts or shelves. The bracket provides  
of galvanised steel sheet and serves for the lateral all threaded holes needed for easy mounting of a de-  
mounting of an automatic fire detector, e.g., in false tector base.  
Specifications  
Dimensions L × W × H  
Weight  
130 × 120 × 40 (mm)  
225g  
Order number  
Order name  
249044  
Detector Mounting Bracket MMW1-1  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
MS-ZBH-Ap_DBL_LST_EN_0804.PDF • PAGE 3  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
 

Lantronix Network Card UDS100 User Manual
Lenmar Enterprises Battery Charger BCR06 User Manual
LG Electronics Car Satellite TV System FMA LG101 User Manual
LG Electronics Clothes Dryer DLE1001W User Manual
Logitech Mouse G302 User Manual
Marshall electronic Flat Panel Television V R1041DP TE User Manual
Melissa Hair Dryer 635 102 User Manual
Memorex CD Player MC2864 User Manual
Memorex TV VCR Combo MVT2139 User Manual
Metra Electronics PDAs Smartphones 99 6540 User Manual