Klipsch Speaker RB 10 User Manual

4'' Two-Way Bookshelf Loudspeaker  
RB-10  
I
The Reference Series RB-10 bookshelf  
loudspeaker is part of Klipsch’s new entry-  
level Reference 10 family that offers the same  
advanced technology and world-class materials  
as the Reference III models but from smaller  
enclosures and at lower price points.  
Magnetically shielded to prevent video interference  
Back-panel keyhole and threaded insert for popular wall and  
ceiling brackets  
I
I
Tractrix Horn titanium dome compression driver tweeter for clean,  
detailed highs  
I
Cerametallic cone woofer  
I
High sensitivity and power handling  
As the smallest bookshelf loudspeaker Klipsch  
has ever made, the RB-10 employs a 4-inch  
woofer and  
compression driver loaded with a 4-inch  
square Tractrix Horn for maximum clarity  
a
1-inch titanium-dome  
S P E C I F I C A T I O N S  
®
BANDWIDTH  
90Hz-20kHz 3dB  
and efficiency.  
SENSITIVITY  
90dB @ 2.83 volts/1 meter  
8 ohms compatible  
2800Hz  
The woofer on the RB-10 still features  
Klipsch’s distinctive, copper-colored  
Cerametallic™ material. Made with an  
anodized aluminum, this cone is strong with  
low mass. The anodizing process converts its  
inner and out surface to ceramic. The  
outcome is a rigid cone with superb damping  
characteristics that will not flex or resonate at  
frequencies within the woofer’s operating  
range.  
NOMINAL IMPEDANCE  
CROSSOVER FREQUENCY  
POWER HANDLING  
50 watts (200 watts peak)  
ENCLOSURE TYPE  
DRIVE COMPONENTS  
Bass-reflex via rear-firing port  
Two way system using one 1'' (2.5cm)  
magnetically shielded, titanium dome  
compression driver with an integral  
4'' (10.2cm) square 90˚x 60˚ Tractrix Horn  
and one 4'' (10.2cm) magnetically shielded,  
Cerametallic cone woofer  
As in all Reference Series speakers, the RB-10  
crossover network is constructed using  
extremely high-quality components including  
top-of-the-line internal wiring, polyester film-  
type capacitors and an air-core inductor to  
ensure signal purity and proper driver  
integration.  
WEIGHT  
HEIGHT  
WIDTH  
DEPTH  
6 lbs. (2.7kg)  
8.7" (22.1cm)  
5.6" (14.1cm)  
7.8" (19.8cm)  
FINISH  
Black Ash woodgrain vinyl  
Keyhole mount with threaded insert  
The RB-10 has both a back-panel keyhole for  
on-wall mounting and a threaded insert for  
attachment to popular adjustable wall and  
ceiling brackets. Available in a black vinyl finish,  
the RB-10 features a low-diffraction sculpted  
baffle and magnetically attached grille for an  
elegant fit and finish.  
MOUNTING  
*All dimensions include grille and binding posts  
1-800-KLIPSCH  
All specifications are subject to change without notice. ©2004  
 

Indesit Washer PWE 8148 S User Manual
InFocus Crib Toy IN5300 User Manual
Jabra Video Game Headset PR9460 User Manual
Jumpking Fitness Equipment JK14EN2A 05 User Manual
JVC DVR HR J642U User Manual
JVC Home Theater System GVT0289 018D User Manual
Kenmore Dishwasher 66517422 User Manual
KitchenAid Water Dispenser 3184330 User Manual
Kompernass Kitchen Utensil KH 550 User Manual
Konftel Conference Phone 200NI User Manual