JVC VCR LPT0416 001A User Manual

VIDEO CASSETTE PLAYER  
-
HR J P400K  
-
HR J P200A  
STANDBY/ON  
NTSC  
PLAYBACK  
ON PAL TV  
MIC  
DIGITAL ECHO  
SP/LP/EP  
1
MIC  
2
B.E.S.T POWER-ON LP  
STANDBY REC  
/ EP  
NTSC  
4.43  
B.E.S.T.  
/
PAL NTSC  
MIN  
MAX  
0
10  
NTSC 3.58  
REMOTE CONTROL UNIT  
VIDEO  
TV/VCR  
AUTO  
-
TRACKING  
+
-
-
TV CH +  
VOLUME  
+
TV/VCR  
STANDBY/ON  
TV  
NTSC  
PLAYBACK  
ON PAL TV  
VIDEO  
AUDIO  
SP/LP/EP  
B.E.S.T POWER-ON LP  
STANDBY REC  
/ EP  
NTSC 3.58/4.43  
G, RECORDING  
NTSC PLAYBACK ON PAL TV  
NTSC  
4.43  
PAL  
B
/
D
/
K
MESECAM  
B
/
G,  
D
/
K
B.E.S.T.  
/
PAL NTSC  
NTSC 3.58  
PAL NTSC  
The VCP illustrations appearing in this instruction manual are of the HR-JP400K.  
Рисунки для видеомагнитофона, подаваемые в данной инструкции по  
эксплуатации, относятся к модели HR-JP400K.  
INS TRUCTIONS  
LPT0416-001A  
 
Controls  
Front panel  
STANDBY/ON  
NTSC  
PLAYBACK  
ON PAL TV  
MIC  
DIGITAL ECHO  
SP/LP/EP  
1
MIC  
2
B.E.S.T POWER-ON LP  
STANDBY / REC  
/
EP  
NTSC  
4.43  
B.E.S.T.  
PAL NTSC  
MIN  
MAX  
0
10  
NTSC 3.58  
HR-JP400K  
STANDBY/ON  
NTSC  
PLAYBACK  
ON PAL TV  
VIDEO  
AUDIO  
SP/LP/EP  
B.E.S.T POWER-ON LP  
STANDBY / REC  
/
EP  
NTSC 3.58/4.43  
G, RECORDING  
NTSC PLAYBACK ON PAL TV  
NTSC  
4.43  
PAL  
B
/
D
/
K
MESECAM  
B
/
G,  
D
/
K
B.E.S.T.  
PAL NTSC  
NTSC 3.58  
HR-JP200A  
1 STANDBY/ON  
button  
@ Mode indicators  
To turn the power on and off (standby mode).  
B.E.S.T. indicator  
Lights when B.E.S.T. in set to on.  
2 Cassette loading slot  
POWER-ON indicator  
Load the video cassette here.  
Lights when the power turns on.  
Blinks while a cassette is ejected.  
3 Rewind 1 button  
LP / EP indicator  
Torewindthevideotapeandtostartreverseshuttlesearch  
playback mode.  
Lights when the tape speed is LP(PAL) or EP(NTSC)  
mode.  
STANDBY / REC indicator  
4 Play # button  
Lights when the power turns off (Standby mode) or  
during recording mode.  
To start playback.  
Blinks during recording pause mode.  
5 Fast forward ¡ button  
To fast forward the video tape and to start forward shuttle  
search playback mode.  
Note:  
All five indicators excluding the STANDBY/REC indicator  
blink one by one in a clockwise sequence during playback  
or fast forward mode and in a counterclockwise sequence  
during rewind mode. They do not blink one by one during  
rewinding in the repeat playback mode.  
6 Pause 8 button  
To freeze the picture during playback and to engage the  
recording pause mode.  
7 Stop/Eject § button  
# DIGITAL ECHO control (HR-JP400K only)  
To stop playback and to eject the video tape.  
To add as much echo to your voice.  
8 Record button  
$ MIC volume control (HR-JP400K only)  
To start recording.  
To adjust the microphone volume.  
9 B.E.S.T. button  
% SP / LP / EP button  
To set the B.E.S.T. (Biconditional Equalized Signal Track-  
ing) system to on.  
To select the recording tape speed.  
^ MIC input terminals (HR-JP400K only)  
0 Remote sensor window  
For remote control operation.  
& VIDEO/AUDIO IN terminals (HR-JP200A only)  
! Colour System Output switch  
Select to watch an NTSC tape and to record NTSC signal.  
3
 
Terminals and wireless remote control  
Rear panel  
RF OUT  
32(24)  
IN  
OUT  
40(27)  
AUDIO  
K
G
ANT.IN  
VIDEO  
002  
1 AC power cord  
HR-JP400K  
2 RF channel adjustment screw  
3 RF. OUT terminal  
4 AUDIO/VIDEO IN terminals  
(HR-JP400K only)  
5 AUDIO/VIDEO OUT terminals  
6 ANT. IN terminal  
7 TV system switch  
RF OUT  
ANT.IN  
32(24)  
40(27)  
OUT  
AUDIO  
K
G
001  
VIDEO  
HR-JP200A  
Remote control  
5 Play 3 button  
REMOTE CONTROL UNIT  
VIDEO  
To start playback.  
TV/VCR  
6 Record button  
Press the Record and Play 3 buttons together, to start  
AUTO  
-
TRACKING  
+
recording.  
7 TV channel –/+ buttons  
8 TV VOLUME –/+ buttons  
-
-
TV CH  
+
+
9 POWER  
(Player) button  
To turn the power on and off (standby mode).  
VOLUME  
TV/VCR  
0 TRACKING –/+ buttons  
TV  
To adjust tracking during playback.  
! Fast forward ¡ Z button  
To fast forward the video tape. Also to start forward shuttle  
search playback.  
@ Pause 8 button  
To freeze the picture during playback. Also to engage the  
recording pause mode.  
# Stop 7 button  
To stop playback.  
When using the remote control for operation of the video  
cassette player, make sure that it is pointed at the remote  
sensor window.  
$ POWER  
(TV) button  
To turn the TV power on and off.  
You can also use the player’s remote control to operate a JVC  
television.  
% TV/VCR (TV) button  
To switch TV between TV and VCR (or AV).  
1 Transmitting window  
Notes:  
2 TV/VCR (Player) button  
Point the remote control toward the sensor window.  
The maximum operating distance of the remote control is  
about 8 m.  
When inserting the batteries, be sure to insert in the correct  
directions as indicated under the battery cover.  
If the remote control doesn’t work properly, remove its  
batteries, wait a short time, replace the batteries and then try  
again.  
Not function  
3 Digital AUTO TRACKING button  
To cancel the Auto tracking mode.  
4 Rewind 1 + button  
To rewind the video tape. Also to start reverse shuttle  
search playback.  
4
 
Connections  
Make sure that the power to the video cassette player and TV  
is off before making the following connections.  
Connection A  
HR-JP400K  
RF OUT  
ANT.IN  
32(24)  
40(27)  
IN  
OUT  
AUDIO  
K
G
VIDEO  
002  
Connection B  
Connection A  
STANDBY/ON  
VIDEO  
AUDIO  
HR-JP200A  
RF OUT  
32(24)  
40(27)  
OUT  
K
G
AUDIO  
ANT.IN  
002  
VIDEO  
Connection B  
Note:  
If you put a TV set directly on this VCP or install it too close to  
a TV set, noise may occur. If this noise occurs, separate the  
VCP and the TV set.  
Connect the TV’s VIDEO OUT and AUDIO OUT termi-  
nals to the video cassette player’s VIDEO IN and AU-  
DIO IN terminals.  
2
Connection A (basic)  
In order to use the video cassette player it must be connected  
between the antenna and the TV.  
Connect the TV’s VIDEO IN and AUDIO IN terminals to  
the VCP’s VIDEO OUT and AUDIO OUT terminals.  
3
1 CploanyneercstAyNouTr. ITNVtearnmteinnnala. cable to the video cassette  
Connect the power cord to your household AC outlet.  
4
2 CthoenvniedcetoocnaesesnedtteofptlhaeyeprrsovRidFe. dORUFT atenrtmeninnaalcaanbdlethtoe  
TV system  
other end to the TV’s antenna terminal.  
The TV system switch should be set as follows.  
K position: Set to this position for K system areas (East-  
ern European countries).  
3 Connect the power cord to your household AC outlet.  
G position: Set to this position for G system areas (West-  
Connection B  
ern European countries for example).  
For connection of a TV that has VIDEO/AUDIO IN/OUT termi-  
nals. This connection is necessary to record TV programmes.  
UseRCAtypepinconnectioncords(availablefromaudio/video  
stores) for connection. This connection is in addition to connec-  
tion A.  
K
G
Note:  
When connection B is used to connect the TV and video  
cassette player, setting the TV system switch is not  
necessary.  
Follow steps 1 and 2 of “Connection A”.  
1
5
 
Setting the video channel The video cassette  
To watch videos on your TV, it must be set to the same UHF  
channel as the video cassette player. This channel is used as  
the video channel.  
Inserting a cassette  
This video cassette player has been preset to UHF channel 36.  
STANDBY/ON  
Note:  
When you have connected the VIDEO/AUDIO OUT termi-  
NTSC  
MIC  
DIGITAL ECHO  
PLAYBACK  
ON PAL TV  
SP/LP/EP  
1
MIC  
2
B.E.S.T POLP  
ST
/
EP  
NTSC  
4.43  
nals of this video cassette player to your TV’s video/audio in  
terminals (connection B of the “Connections” section), set-  
ting the video channel is not necessary. In this case simply  
set the TV’s TV/VCR switch to VCR.  
B.E.S.T.  
PAL NTSC  
MIN  
MAX  
0
10  
NTSC 3.58  
1 Tpurer-nrethcoervdieddeovicdaesosteatptee.player’s power on and load a  
2 Turn on the TV and set it to UHF channel 36.  
If UHF channel 36 is being used for broadcasting in  
your area:  
STANDBY/ON  
1
MIC  
2
P
B.E.S.T.  
PAL NTSC  
MIN  
MAX  
0
10  
SC 3.58  
AdjusttheTV’schannelselectoralittleatatimeuntiltheTV  
screen is blank (set it towards a higher or lower channel).  
Adjust the RF channel adjustment screw on the rear panel  
of the video cassette player a little at a time until the  
playback picture appears on the TV screen.  
7 Insert the cassette as shown and push it gently into the  
video cassette player.  
Thevideocassetteplayerwillbeturnedonautomaticallyand  
the cassette will be loaded.  
7 Press the Stop/Eject § button to eject a cassette.  
During playback or recording, press the § button twice  
(once to stop the tape and once more to eject it).  
Lower channel  
32(24)  
Notes:  
40(27)  
If the cassette’s safety tab has been removed, playback will  
start automatically when the cassette is inserted.  
A cassette can also be ejected when the power is off.  
ThePOWER-ONindicatorblinkswhilethecassetteisejected.  
Higher channel  
Special note on Video Cassettes  
If the TV’s channel selector was set to a higher channel  
than channel 36, turn the RF channel adjustment screw  
to the left and vice versa.  
To prevent accidental recording on a recorded cassette, re-  
move its safety tab. To record on it later, cover the hole with  
adhesive tape.  
Adjust the TV picture with the TV’s tuning controls.  
3
Using the TV while the video  
cassette player is connected  
Safety tab  
To watch a normal TV broadcast, select a TV station with  
the TV’s channel selector.  
6
 
Playback  
NTSC, PAL and MESECAM video tapes can be played back on  
this video cassette player. Refer to the “Colour system output  
mode selection” section for details.  
NTSC Playback on PAL TV  
The vertical size of the playback picture will shrink and some  
picture “noise” may appear on the screen.  
The playback picture may roll. In this case adjust the picture  
with the TV’s vertical hold knob (with some TV’s this adjust-  
ment may not be possible).  
Before proceeding:  
The colour of the playback picture may differ from the  
Turn on the power of the TV and video cassette player.  
Make sure that the TV is set to the video channel or that the  
TV’s TV/VIDEO switch is set to VIDEO (refer to the “Setting  
the video channel” section for details).  
original.  
In the forward/reverse shuttle search or still modes there  
may be no colour depending on the TV and video cassette  
player combination.  
Colour system output mode selec-  
tion  
REMOTE CONTROL UNIT  
VIDEO  
TV/VCR  
AUTO  
-
TRACKING  
+
1
2
2
To watch an NTSC tape, it will be necessary to select one of the  
following output modes.  
-
-
TV CH +  
VOLUME  
+
TV/VCR  
Selecting the NTSC PLAYBACK ON PAL TV mode  
Select this mode to watch NTSC tapes on a PAL system TV.  
NTSC  
TV  
MIC  
DIGITAL ECHO  
PLAYBACK  
ON PAL TV  
SP/LP/EP  
B.E.S.T POWER-ON LP EP  
/
NTSC  
4.43  
B.E.S.T.  
STANDBY / REC  
PAL TS
MIN  
MAX  
0
10  
NTSC 3.58  
NTSC  
PLAYBACK  
ON PAL TV  
NTSC  
4.43  
NTSC3.58  
Load a pre-recorded cassette.  
If the safety tab on the cassette is removed, playback will  
start automatically.  
1
2
Selecting the NTSC 4.43 mode  
Select this mode to watch NTSC tapes on a multi-system TV  
(that has an NTSC 4.43 setting).  
Press the Play - button to start playback.  
Select NTSC 4.43 to record NTSC 4.43 signal.  
NTSC  
PLAYBACK  
ON PAL TV  
7 Press the Stop/Eject § button or the remote control’s  
Stop 7 button to stop playback.  
NTSC  
4.43  
To fast forward or rewind the tape:  
7 From the stop mode, press the Fast forward ¡ or  
Rewind 1 button.  
NTSC3.58  
Selecting the NTSC 3.58 mode  
Select this mode to watch NTSC tapes on a NTSC system TV.  
Note:  
All five indicators excluding the STANDBY/REC indicator blink  
one by one in a clockwise sequence during playback or fast  
forward mode and in a counterclockwise sequence during  
rewind mode. They do not blink one by one during rewinding  
in the repeat playback mode.  
NTSC  
PLAYBACK  
ON PAL TV  
NTSC  
4.43  
NTSC3.58  
7
 
Playback features  
Slow motion playback  
Repeat playback  
Slow motion playback is 1/6 of the normal playback speed. The  
sound will be cut during slow motion playback.  
Use this feature to repeat playback of a cassette 50 times.  
During playback:  
During playback:  
Press the Play 3 button for more than 5 seconds.  
1
Press the Pause 8 button for 2 seconds.  
The Play indicator will blink slowly and playback of the  
1
cassette will repeat 50 times automatically.  
7 Press the Play 3 button to return to the normal playback  
Press the Stop 7 button to stop repeat playback.  
2 Tape playback will be stopped and the repeat playback  
speed.  
mode will be cancelled.  
Notes:  
If the picture shakes during the slow mode, use the manual  
tracking +/– buttons to correct the picture.  
After approx. 5 minutes, the slow mode will disengage to  
protect the video tape.  
Rewind power off  
When the tape has finished rewinding, the VCP will turn itself off.  
During stop:  
Still picture and frame advance  
Press the Rewind 1 button.  
1
Use this feature to freeze the playback picture and to advance  
one frame at a time. The sound will be cut during this mode.  
Press the STANDBY/ON  
button within 2 seconds.  
2 The STANDBY/REC indicator will blink.  
During playback:  
Tracking adjustment  
Press the Pause 8 button.  
1 The picture will be frozen.  
Automatic tracking is adjusted each time a cassette is inserted  
in the video cassette player, you may wish to adjust tracking  
manually during playback.  
PressthePause8buttonrepeatedlytoadvanceframes.  
2 Eachtimethebuttonispressedthestillpicturewilladvance  
Manual tracking:  
one frame.  
Press the remote control’s AUTO button.  
7 Press the Play 3 button to resume normal playback.  
1
2
Press the remote control’s TRACKING + or – button to  
adjust tracking.  
Notes:  
If the picture shakes during the still mode, use the manual  
tracking +/– buttons to correct the picture.  
After the picture has been frozen for approx. 5 minutes, the  
still mode will disengage to protect the video tape.  
7 Press the AUTO button to return to automatic tracking.  
Notes:  
Trackingmayneedtobeadjustedeachtimeadifferentvideo  
Shuttle search playback  
tape is inserted for playback.  
Tracking will be automatically set to the reference position  
when the cassette is ejected.  
Use this feature during playback to visually locate any point on  
arecordedcassette. Thesoundwillbecutduringshuttlesearch  
operation.  
ATTENTION:  
In the search, still, slow-motion or frame advance mode,  
the picture will be distorted.  
During playback:  
the noise bars will appear.  
Press the Fast forward ¡ or Rewind 1 button to  
1
there will be loss of colour.  
engage shuttle search forward or reverse.  
the picture may not appear.  
These problems may occur especially in the SP mode.  
7 Press the Play 3 button to resume normal playback.  
Notes:  
Whenthevideocassetteplayerisinthestopmode,pressthe  
Play 3 button to start playback before engaging the shuttle  
search mode.  
For short searches, press and hold Fast forward or Rewind  
button. When released, normal playback will continue.  
8
 
Karaoke features  
Recording  
Use the following procedure to record TV programmes on a  
blank video tape.  
Karaoke (HR-JP400K only)  
Use this feature to enjoy karaoke video. Connect a microphone  
to both MIC 1 and MIC 2 for duets.  
Before proceeding:  
Insert a pre-recorded Karaoke tape.  
1
To record TV programmes, the video cassette player must  
be connected to the TV as shown in connection B of the  
“Connections” section.  
Turn on the power of the TV and video cassette player.  
Make sure that the video cassette’s safety tab is intact. If it  
has been removed, cover the hole with adhesive tape.  
2 Press the PLAY 3 button.  
Adjust the MIC volume as necessary.  
3
Adjust the DIGITAL ECHO volume as necessary.  
4
REMOTE CONTROL UNIT  
VIDEO  
TV/VCR  
1
5 Start singing.  
AUTO  
-
TRACKING  
+
3
Note:  
-
-
TV CH +  
Check that the power is off (standby mode) before plugging in  
the microphone.  
NTSC  
MIC  
DIGITAL ECHO  
VOLUME  
+
TV/VCR  
PLAYBACK  
ON PAL TV  
SP/LP/EP  
B.E.S.T POWER-ON LP  
STANDBY REC  
/
EP  
NTSC  
4.43  
B.E.S.T.  
/
PAL NTSC  
MIN  
MAX  
0
10  
NTSC 3.58  
TV  
2
3
Load a blank video tape.  
1
Press SP/LP/EP button to set the recording speed.  
2 If LP or EP is selected, the LP/EP indicator will light.  
Press the Record button to start recording. (On the  
3
remote control unit press the Record and Play 3  
button at the same time.)  
The recording indicator will light during recording.  
7 Press the Stop/Eject § button or the remote control’s  
Stop 7 button to stop recording.  
To stop recording temporarily:  
7 Press the Pause 8 button.  
The recording indicator will blink.  
Press the Play 3 button to resume recording.  
Notes:  
To engage recording standby, press the Record button  
and then press the Pause 8 button. The recording indicator  
will blink during recording standby. Press the Play 3 button  
again to start recording.  
If the Record button does not work, check to see if the  
cassette safety tab has been removed.  
The player automatically stops when record-standby contin-  
ues for more than 5 minutes.  
The video tape will be rewound automatically when the end  
of the tape is reached.  
9
 
B.E.S.T. picture system  
The B.E.S.T. (Biconditional Equalized Signal Tracking) system  
checks the condition of the tape in use during recording and  
playback, and compensates to provide the highest-possible  
recording and playback pictures. The default setting for both  
recording and playback is ‘‘ON’’.  
Playback  
The recorder assesses the quality of the tape once you initiate  
playback.  
When watching a tape recorded with B.E.S.T. set to on, it is  
recommended that you leave B.E.S.T. on during playback as  
well.  
Recording  
Press Play 3 button to start playback.  
Insert a cassette with the record safety tab intact.  
1
1
7 The recorder adjusts the playback picture quality based on  
7 The recorder power comes on automatically.  
the quality of the tape in use.  
7 B.E.S.T. is active during Auto Tracking.  
The default setting is ‘‘ON’’.  
2
Notes:  
When watching a rental tape, or one recorded on another  
video recorder, set B.E.S.T. to on or off to your preference by  
pressing B.E.S.T. button.  
7 If this is the case, go to step 3. If not, press B.E.S.T. button  
to set B.E.S.T.on and B.E.S.T. indicator lights.  
B.E.S.T. indicator only lights at the beginning of automatic  
tracking.Eventhoughitdoesn’tappearafterthat,theB.E.S.T.  
function is operative.  
Press and hold Record and Play 3 buttons on the  
3
remote, or press Record button on the recorder.  
7 The recorder spends approximately 7 seconds assessing  
the condition of the tape, then begins recording.  
Notes:  
The B.E.S.T. system works only after a tape has been  
inserted and the Record mode is first initiated. It does not  
work during recording.  
Once the cassette is ejected, the B.E.S.T. data is cancelled.  
The next time the cassette is used for recording, B.E.S.T. is  
re-performed.  
ATTENTION:  
Since the B.E.S.T. system works before recording actually  
starts, there is a delay of approximately 7 seconds after  
Record and Play 3 buttons on the remote are pressed,  
or Record button on the recorder is pressed. To make  
sure you record the desired scene or programme in its  
entirely, first perform the following steps:  
1 PressandholdPause8 andRecordbuttonstoengage  
the Record Pause mode.  
The recorder then automatically check the condition of  
the tape and, after approximately 7 seconds, reenters  
Record Pause.  
2 Press Play 3 button to start recording.  
If you want to bypass the B.E.S.T. system and begin  
recording immediately, press B.E.S.T. button to set  
B.E.S.T. off.  
10  
 
Editing  
EditingTo/From Another Recorder  
HR-JP400K  
Player  
HR-JP200A  
Player  
RF OUT  
32(24)  
RF OUT  
ANT.IN  
32(24)  
40(27)  
IN  
OUT  
40(27)  
AUDIO  
OUT  
K
G
AUDIO  
VIDEO  
K
G
ANT.IN  
VIDEO  
002  
002  
Audio/Video signals  
VIDEO CHANNEL  
TV  
Receiver  
Audio/Video signals  
Recorder  
RF OUT  
ANT.IN  
AUD  
RF OUT  
32(24)  
IN  
OUT  
40(27)  
AUDIO  
K
G
Recorder  
ANT.IN  
VIDEO  
002  
STANDBY/ON  
NTSC  
PLAYBACK  
ON PAL TV  
VIDEO  
AUDIO  
SP/LP/EP  
B.E.S.T POWER-ON LP EP  
/
NTSC 3.58/4.43  
G, RECORDING  
NTSC PLAYBACK ON PAL TV  
NTSC  
4.43  
PAL  
B
/
D
/
K
MESECAM  
B
/
G,  
D
/
K
B.E.S.T.  
PAL NTSC  
STANDBY / REC  
NTSC 3.58  
TV  
Receiver  
VIDEO CHANNEL  
Notes:  
1 CtootnhneercetctohredpelrasyeArUsDAIOUDaInOdaVnIdDEVOIDEINOcOonUnTecctoonrns.ectors  
2 Put the player in the Play mode.  
NTSCtapesbeingplayedbackintheNTSCPLAYBACKON  
PAL TV mode cannot be dubbed to another recorder.  
When you dub an NTSC tape using your recorder as the  
playback deck, select NTSC 3.58 (or 4.43) with the Colour  
System Output switch.  
3 Put the recorder in the Record mode.  
Important:  
7 To edit, both the player and the recorder must be of the  
same colour system. Press your recorder’s Colour sys-  
tem switch to select the appropriate colour system.  
11  
 
Troubleshooting  
Specifications  
Format................................ VHS Standard  
Video recording system ..... Rotary, slant azimuth two-head  
helical scan system  
Rotary heads...................... 2 video heads  
RF output ........................... System G/K type modulation  
UHFch3240adjustable(preset  
ch 36)  
Problem  
Check point  
Is the power cord plugged  
in?  
No power  
Is the power turned on?  
Tape cannot be ejected  
No picture  
Was the video cassette  
player’s§buttonpressed?  
Is the TV set to the video  
channel?  
Is a cassette loaded?  
Aretheconnectionscorrect?  
Recording (line input) ......... PAL, SECAM (MESECAM tape)  
NTSC 3.58, NTSC 4.43  
Playback (line output) ........ PAL, SECAM (MESECAM tape)  
NTSC 3.58  
NTSC 4.43  
Simulated PAL (NTSC tape)  
No colour  
Set the Colour System Out-  
put switch according to the  
recorded tape system.  
Video  
Line input level ................. 0.5 – 2.0 Vp-p/75 ohms, unbal-  
Shuttle search does not Is the video cassette player  
function  
in the playback mode?  
Disturbances in playback Istrackingadjustedproperly?  
anced  
Line output level............... 1.0 Vp-p/75 ohms, unbalanced  
S/N ratio ........................... More than 45 dB  
Horizontal resolution ........ More than 250 lines  
(PAL/MESECAM)  
picture  
Is the TV adjusted properly?  
Install this VCP a little way  
apart from the TV set.  
More than 220 lines (NTSC)  
Remote control does not The batteries are weak.  
function  
Replace the batteries.  
Auto playback does not The video cassette’s record-  
Audio  
Line input level ................. –8 dBm/50 k ohms, unbalanced  
Line output level............... –6 dBm/1 k ohm, unbalanced  
Frequency response ........ 70 Hz to 10,000 Hz (Normal)  
function  
ing safety tab has not been  
removed.  
Recording does not func- Aretheconnectionscorrect?  
FF, REW time .................... Approx. 3 min. with E-180  
cassette  
tion  
Was the Record button  
pressed?  
The video cassette’s record-  
ing safety tab is removed.  
Power requirements  
Rating .............................. AC 110 – 240 V, 50/60 Hz  
Operating ......................... AC 90 – 260 V, 50/60 Hz  
The video cassette player Microcomputer malfunction.  
doesnotfunctionproperly Disconnect the power plug  
from the AC outlet and then  
Power consumption ........... 13 W  
re-insert it.  
The microcomputer will be  
reset to its initial mode.  
Operation temperature ....... 5°C to 40°C  
Dimensions ........................ [HP-JP400K]  
400 (W) × 94 (H) × 288 (D) mm  
[HP-JP200A]  
400 (W) × 94 (H) × 280 (D) mm  
Weight ................................ 3.1 kg  
About Head cleaning  
Standard accessories  
Remote control unit ...............................................................1  
Batteries for remote control...................................................2  
RF antenna cable..................................................................1  
Microphone (HR-JP400K only) .............................................1  
Conversion plug ....................................................................1  
7 If the picture playback becomes blurred, it does not mean  
that the recorded program has been erased.  
7 Dirt accumulated on the video heads after long periods of  
use causes such troubles. In this case, head cleaning  
requiring highly technical care is necessary.  
7 For head cleaning, consult the nearest JVC dealer.  
Design and specifications subject to change without notice.  
12  
 
MEMO  
 

Intel Computer Hardware HS 2601A User Manual
IOGear Network Card GUC2015V User Manual
Jet Tools Sander JBOS 5 User Manual
Kenmore Freezer 25316082101 User Manual
Kenmore Range 790 9663 User Manual
Kenwood Cassette Player KRC 435 User Manual
Kenwood TV DVD Combo KVT 911DVD User Manual
KitchenAid Oven KEBS177SBL04 User Manual
Kolcraft Stroller S67 T User Manual
Koss Headphones QZ 900 User Manual