IOGear Switch GCS634U User Manual

User Manual (GCS634U)  
 
Welcome  
Thank you for purchasing one of the most feature-rich keyboard, video, and mouse switches on the  
market. IOGEAR®’s 4-Port USB KVM switches are first-rate connectivity accessories designed to  
help reduce the frustration of managing multiple computer systems. With the 4-Port USB KVM by  
IOGEAR®, you can access up to four USB computers from a single USB console (USB keyboard,  
USB mouse and monitor). The 4-Port USB KVM allows you to change ports easily by entering Hot Key  
combinations from the keyboard. Setup is fast and easy – simply plug the cables into their appropriate  
ports with no drivers needed.  
We hope you enjoy using your 4-Port USB KVM, yet another first rate connectivity solution from  
IOGEAR®.  
©2006 IOGEAR. All Rights Reserved. PKG-M0320  
IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and  
Windows are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business  
Machines, Inc. Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no  
warranty of any kind with regards to the information presented in this document. All information furnished here is for  
informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any  
inaccuracies or errors that may appear in this document.  
3
 
Table of Contents  
Package Contents  
Features  
05  
07  
08  
09  
11  
12  
19  
20  
21  
System Requirements  
Introduction  
Installation  
Operation  
Specification  
Technical Support  
Limited Warranty  
4
 
Package Contents  
This package contains:  
• 1 4-Port KVM Switch (two cables built-in)  
• 2 Detachable custom KVM cables  
• 1 User Manual  
• 1 Quick Start Guide  
• 1 Warranty Registration Card  
If any items are damaged or missing, please contact your dealer.  
5
 
Overview  
Introducing the four port 4-Port USB KVM switch from IOGEAR® – A simple solution for those with more  
PCs than hands. Use one USB keyboard, one monitor and one USB mouse to control up to four USB  
computers. This self-powered KVM switch features the unique USB sniffing technology for USB mouse  
& keyboard emulation to ensure smooth operation, as well as support for Plug-n-Play monitors and most  
wheel mice. Our patented VSE Video Signal Enhancement® technology provides rich, 32-bit color at  
resolutions up to 2048 x 1536.  
Another big plus of this switch is the capability to provide audio support, it allows you to share your multi-  
media speakers among the two connected computers. This switch also offers multi-platform support, it is  
compatible with Macs and Sun Solaris workstations. IOGEAR® made a huge breakthrough in supporting  
Mac and Sun, by allowing Mac and Sun special keys to be functional, either with the Mac or Sun  
keyboard as the console keyboard, or with a standard PC keyboard. When using a PC keyboard, a  
special set of hot keys are designated to emulate the Mac and Sun special keys.  
With all KVM cables included with the unit, all you need to do is to plug in your computers, and you’ve  
got a complete KVM solution from IOGEAR®.  
6
 
Features  
• Use one USB keyboard, monitor and USB mouse to control up to four USB computers.  
• Two 6’ long molded-in cables to simplify setup, with two additional detachable cables to reduce clutter.  
• Share your multimedia speakers among the connected computers.  
• Full support for Mac and Sun systems.  
• Supports special keys on Mac and Sun keyboards.  
• Port selection through convenient Hot Keys.  
• USB sniffing technology allows complete USB mouse and keyboard emulation for error-free boot-up.  
• Plug-n-Play monitor support.  
• Support video resolutions up to 2048 x 1536  
• No software required.  
• Built in AutoScan mode.  
• LEDs allow for easy status monitoring.  
• 3 Year Limited Warranty.  
7
 
System requirement  
Console  
• A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any  
computer in the installation  
• A USB Keyboard  
• A USB Mouse  
Computers  
The following equipment must be installed on each computer that is to be connected to the system:  
• A VGA, SVGA or Multisync card  
• A USB type A port  
• A multimedia sound card for audio sharing  
Speakers  
• Only 2-channel, powered speakers are supported  
8
 
Introduction  
1) Port LEDs  
2) USB Keyboard Port  
3) USB Mouse Port  
4) VGA Monitor Port  
5) Stereo Speaker Port  
6) USB Plug (black)  
7) VGA Plug (blue)  
8) Audio Plug (light green)  
9) Custom KVM Plug (dark green)  
5
4
3
1
2
6
7
8
9
9
 
Introduction  
10)Custom KVM Ports (dark green)  
10  
6
7
6
8
7
8
10  
 
Installation  
1. Plug your keyboard and mouse into the correct USB ports on the side of the switch. If using a  
wireless keyboard and mouse whose receiver has only one USB plug, make sure it is inserted into  
the keyboard port and not the mouse port.  
2. Plug your monitor into the VGA port on the side of the switch.  
3. Plug your powered speakers into the audio jack on the side of the switch.  
4. Plug the extra KVM cables into the green ports on the back of the switch using the custom green  
connectors. (You may skip both or only one of these cables if only using two or three computers)  
5. Plug the VGA, USB, and audio connections on each of the KVM cables into each of your computers.  
11  
 
Operation  
Switching between computers (Toggle keys)  
By default, all of the following commands begin by pressing the [Scroll Lock] key twice. A few PC  
keyboards and all Apple keyboards do not have a [Scroll Lock] key. If you have one of these keyboards  
you must use the alternate toggle key of [Control] instead. Enter advanced hotkey mode as described  
in the next section and press [T]. Then all of the following commands will work by simply pressing the  
[Control] key in place of the [Scroll Lock] key.  
[Scroll Lock] [Scroll Lock] [Enter] – This will switch everything (KVM and sound) to the next port with  
a computer that is powered on. If only one computer is on, this will have no effect.  
[Scroll Lock] [Scroll Lock] (number) [Enter] – This will switch everything (KVM and sound) to the  
exact port number typed. The number must be between 1 and 4, and you must use the numbers across  
the top of the keyboard, not the number pad. This command will work even if the computer on that port  
is not powered on.  
[Scroll Lock] [Scroll Lock] [K] [Enter] – This will switch the KVM (keyboard, video, and mouse) to the  
next port with a computer that is powered on. The sound will not switch, allowing you to remain listening  
to the same computer as before.  
[Scroll Lock] [Scroll Lock] (number) [K] [Enter] – This will switch the KVM (keyboard, video, and  
12  
 
Operation  
mouse) to the exact port number typed. The number must be between 1 and 4, and you must use the  
numbers across the top of the keyboard, not the number pad. The sound will not switch, allowing you to  
remain listening to the same computer as before.  
[Scroll Lock] [Scroll Lock] [S] [Enter] – This will switch only the speakers to the next port with a  
computer that is powered on. The keyboard, video, and mouse will remain where they were.  
[Scroll Lock] [Scroll Lock] (number) [S] [Enter] – This will switch only the speakers to the exact port  
number typed. The number must be between 1 and 4, and you must use the numbers across the top of  
the keyboard, not the number pad. The keyboard, video, and mouse will remain where they were.  
13  
 
Operation  
Advanced Hotkeys  
You may enter advanced hotkey mode by pressing and holding [Num Lock] on the number pad, then  
pressing the [-] key on the number pad and immediately releasing both keys. On Apple keyboards the  
[Clear] key on the number pad should be used in place of [Num Lock]. If you have done this correctly  
the Caps Lock and Scroll Lock lights on the keyboard should begin flashing. This means you are in  
hotkey mode, which will be shortened to just [HKM] below. If you are having trouble entering hotkey  
mode press [Esc] and try again.  
[HKM] [T] – This will change the toggle key used to switch between computers. Each time you enter  
this command the toggle key will switch between the default of [Scroll Lock] and the alternate of  
[Control].  
[HKM] [H] – This will change the hotkey used to enter hotkey mode. Each time you enter this command  
the keys used to enter HKM will switch between the default of [Num Lock]+[-] and the alternate of  
[Control]+[F12]. Please note that you must hold [Control] while pressing [F12] in exactly the same way  
you must hold [Num Lock] while pressing [-].  
[HKM] [A] [Enter] – This will put the switch into Auto Scan mode, disabling the keyboard and mouse  
but switching the display every 5 seconds to the next computer. This is a good way to monitor all your  
computers without continuously pressing hotkeys. Press [Esc] or [Space] to cancel Auto Scan mode.  
14  
 
Operation  
[HKM] [A] (number) [Enter] – This will put the switch into Auto Scan mode, disabling the keyboard  
and mouse but switching the display every few seconds to the next computer. The number typed in  
determines the number of seconds the switch will remain on each port. Press [Esc] or [Space] to cancel  
Auto Scan mode.  
[HKM] [F2] – This will manually set the operating system of the currently active port to Macintosh. This  
will allow the KVM to emulate special keys that are normally only present on an Apple keyboard.  
[HKM] [F3] – This will manually set the operating system of the currently active port to Sun. This will  
allow the KVM to emulate special keys that are normally only present on a Sun keyboard. On some Sun  
computers it is necessary to set up the KVM in this way before the system will properly boot up.  
[HKM] [F10] – This will set the operating system of the currently active port to Automatic. The KVM will  
auto-detect the type of computer on that port to allow emulation of whatever keys are most appropriate  
to that computer. This is the default setting for all ports and is appropriate for PC systems.  
[HKM] [F4] – This will type out a list of current KVM settings. Open a word processor before using this  
command in order to see how the KVM is configured.  
[HKM] [F5] – This will reset the USB ports on the switch, and may clear up any keyboard or mouse  
problems.  
15  
 
Operation  
[HKM] [X] [Enter] – This will disable all toggle key functions. Neither [Scroll Lock] nor [Control] will  
allow you to change ports until this command is entered again.  
[HKM] [R] [Enter] – This will reset all KVM settings to their defaults.  
16  
 
Operation  
Using a PC keyboard to emulate a Sun  
Keyboard  
PC Keyboard  
[Ctrl] [T]  
Sun Keyboard  
Stop  
[Ctrl] [F2]  
[Ctrl] [F3]  
[Ctrl] [F4]  
[Ctrl] [F5]  
[Ctrl] [F6]  
[Ctrl] [F7]  
[Ctrl] [F8]  
[Ctrl] [F9]  
[Ctrl] [F10]  
[Ctrl] [1]  
Again  
Props  
Undo  
After you set up the appropriate Keyboard Platform,  
you will be able to use a PC (101/104) key keyboard  
to emulate the functions of the Sun keyboard when  
the Control key [Ctrl] is used in conjunction with  
other keys. The corresponding functions are shown  
in the table to the right.  
Front  
Copy  
Open  
Paste  
Find  
NOTE: When using [Ctrl] combinations, press and release  
the [Ctrl] key, then press and release the activation key.  
Cut  
[Ctrl] [2]  
[Ctrl] [3]  
[Ctrl] [4]  
[Ctrl] [H]  
Help  
Compose  
Meta  
17  
 
Operation  
Using a PC keyboard to emulate a Mac Keyboard  
PC Keyboard  
[Shift]  
Mac Keyboard  
After you set up the appropriate Keyboard Platform,  
you will be able to use a PC (101/104) key keyboard  
to emulate the functions of the Mac keyboard. The  
corresponding functions are shown in the table to  
the right.  
Shift  
Ctrl  
[Ctrl]  
[Win]  
[Ctrl] [4]  
[Alt]  
[Prt_Sc]  
L Alt/Option  
F13  
NOTE: When using key combinations, press and release the  
first key [Ctrl] or [Alt]), then press and release the activation  
key.  
[Scroll Lock]  
[Desktop Menu]  
[Enter]  
F14  
=
Return  
Delete  
Help  
[Back Space]  
[Ins]  
[Ctrl] [Win]  
[Ctrl] [1]  
F15  
Mult  
[Ctrl] [2]  
V_DN  
V_UP  
[Ctrl] [3]  
18  
 
Specification  
Function  
Specification  
CPU Ports  
Port Selection  
4
Hotkeys  
CPU  
USB  
4 x Type-A (M)  
Connectors  
VGA  
4 x HDB-15 (M)  
4 x Audio Jack (M)  
1 x Type-A (F)  
1 x Type-A (F)  
1 x HDB-15 (F)  
1 x Audio Jack (F)  
4 x Green  
Speaker  
Keyboard  
Mouse  
VGA  
Console  
Connectors  
Speaker  
LEDs  
Keyboard / Mouse Emulation  
Scan Interval  
USB (PC, Mac, Sun)  
5 Seconds  
Resolution  
2048 x 1536, DDC2B  
Bus powered  
Power Mode  
Operating Temperature  
Storage Temperature  
Humidity  
0o C - 50o  
-20o C - 60o  
C
C
0 - 80% RH Noncondensing  
Plastic  
Housing  
Weight  
800g  
Dimensions (L x W x H)  
109.1 x 97.23 x 25.45 mm  
19  
 
Technical Support  
If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at  
to provide you with the latest technical information about our products. Most of the answers to your  
questions can be found here, so please try it out before contacting technical support.  
Technical support is available Monday through Friday from 8:00 am to 5:00 pm PST and can be reached  
at 866-9-IOGEAR or 866-946-4327  
20  
 
Limited Warranty  
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCI-  
DENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK  
OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT.  
The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to  
the contents or use of this documentation, and especially disclaims its quality, performance, merchant-  
ability, or fitness for any particular purpose.  
The direct vendor also reserves the right to revise or update the device or documentation without obliga-  
tion to notify any individual or entity of such revisions, or updates. For further inquires please contact  
your direct vendor.  
21  
 
 
 
Contact Info.  
Hubble  
Irvine, CA 92618  
(P) 949.453.8782  
(F) 949.453.8785  
 

Intel Server STL2 User Manual
IOGear Network Router GCS1108 User Manual
ION Turntable POWERPLAY LP User Manual
JVC Computer Monitor 0204MKH MW VP User Manual
Keating Of Chicago Fryer 14 Counter User Manual
Kenmore Range 7852 User Manual
Kenwood Air Conditioner KW85 User Manual
Kenwood Amplified Phone NX 340U16P User Manual
Kenwood TV DVD Combo KVT 920DVD User Manual
KitchenAid Gas Grill KDRP467K User Manual